Used Pneumatic Control Valve for sale (54,672)

Condition: used, 80 Control Units Electronics / PLC Controls Manufacturer: FESTO Type: CPX-CEC-C1 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery Bljdozvhnfepfx Adhop only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Vötsch Type: VCS³ 7034-5 Vötsch Climate Testing Chamber, Water-Cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side opening: 50 mm Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 9 kW, Rated current: 20 A Fuse, on customer's side: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Bledoziyx Nopfx Adhjp Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Indramat 2AD132B-B35RB1-BS03-A2N1 / 238130 motor, serial number: 2AD132-5994, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Bjdpfx Ajz Tbccjdhjlp

Condition: ready for operation (used), Indramat MAC071B-0-PS-2-C/095-A-0 motor, serial number: 11041, used, in good condition, 100% functional, scope of delivery as shown in the photos. Blsdpfx Ajz Tbciodhsp

Condition: ready for operation (used), Rexroth / Indramat MHD093B-035-PG0-AA motor, serial number 287096, SN: 093-10540. Professionally and completely overhauled and tested. 100% functional. Scope of delivery as shown in the photos. Blodpsz Tbc Nsfx Adhop

Condition: used, Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees . Capacity: 2000 kg/hr Conditions of sale: “As is” or “Refurbished “ Hopper: Twin Screw Drive: Self driven by motor and belt with reducer Outlet: Double jacket outlet for temperature Control Location: In stock Bjdpfx Adjz Imn Ssholp

Condition: used, This listing is for Biotek Valve module Fluidic Component The unit is in full working condition and ready for immediate use The BioTek Valve Module is a fluidic control component designed for use with BioTek microplate washers and automated liquid-handling systems. It provides controlled switching between fluid supply lines and is suitable for laboratory washing applications. The module is supplied as an individual fluidic component. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Blsdpfxszqf H Io Adhsp Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), mileage: 188,940 km, power: 140 kW (190.35 HP), first registration: 01/2011, fuel type: diesel, fuel: diesel, fuel tank capacity: 75 l, color: blue, gearing type: mechanical, number of gears: 6, emission class: euro5, Equipment: ABS, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, soot filter, tachograph, tire pressure monitoring, traction control, trailer coupling, = Additional options and accessories = - Alarm system - Armrest - Exterior mirrors with turn signal - AUX connection - Outside temperature display - Becker holder Bsdpfxjzqux Hj Adhjlp - Co-driver’s bench - Digital radio - Double cab - Tachometer - Third brake light - Driver's seat height adjustment - Remote central locking - Tinted glass - Maintained by dealer - Adjustable steering wheel - Folding exterior mirrors - Metallic paint - Particle filter - Radio/CD player - Disc brakes - Headlight height adjustment - Immobilizer = Additional information = General information Number of doors: 4 Year of construction: 2011 Cab: double Technical information Number of cylinders: 6 Engine displacement: 2,987 cc Weights Unladen weight: 2,360 kg Payload: 1,140 kg GVW: 3,500 kg Condition Technical condition: good Optical condition: good Damage: none Product safety EU responsible: Nico Drost, Molenstraat 4, 4033AV Lienden = Company information = Nidro cars Holland is located in the centre of the country and is the right place to purchase your car, van or truck. The stated price is the 'internet take-away price'. For questions or a test drive, please contact us: FIND OUR ENTIRE STOCK AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the universal solution for every application. The display is user-friendly. Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Robust and durable: The machine is designed for intensive use and is popular in both the textile industry and other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer of 1 to 240 seconds provide flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Bsdpfoziivqex Adhslp Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of supply: (See picture) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Bedjziiwuspfx Adhjlp Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Adept Control Unit Model 310 with Operating Panel Bljdpfx Adszdimaohjp Here we offer an Adept control unit, Model 310, with an operating panel. Adept control unit, Model 310, with operating panel. Control unit, touch panel, cables, and software package. Type: Model 310 Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Bosch Type: SCARA SR8 SCARA SR8 pivoting arm robot with control unit Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have by telephone. Written orders can be placed by email or fax. Bljdpfx Ajzdir Nsdhsp

Condition: used, Stäubli Stäubli RX 60 robot with CS7MB RX60 control unit Manual Control Operator Type: Stäubli RX60 robot Control unit: CS7B RX60 Lifting weight (nominal load – kg): 2.5 kg Total weight: 44 kg Condition: used Scope of delivery: (See image) Bodpfszditmox Adhelp (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Bedpfx Aozdit Tjdhelp Programming teach pendant Large work envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Stäubli Type: RX90 Controller: RX90 - CS7 Industrial robot Description: Axes: 6 Controller: CS7 Payload: 6 kg, and 12 kg at reduced speed Bljdpezdiu Sefx Adhop Reach: 985 mm Approximate weight: 360 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, METTLER TOLEDO AutoChem Fluid Control Module / Fluid Handling Module Mettler Toledo AutoChem FCM Fluid Control Module with integrated FCM-1200 Modifier Fluid Pump For sale is a used AutoChem Fluid Control Module from the manufacturer Mettler Toledo. The device is intended for use in corresponding AutoChem systems as well as for laboratory, reaction, dosing, and fluid handling applications. Technical data: Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Device type: AutoChem Fluid Control Module Power connection: 220 VAC Power frequency: 50 / 60 Hz Fuse: 4 A Time Delay Dimensions: approx. 450 × 650 × 550 mm (W × D × H) Weight: approx. 50 kg Integrated pump: Mettler Toledo FCM-1200 Modifier Fluid Pump Part Number: 16001176 Interfaces: 2 × REMOTE 1 × GPIB Fluid connections on the front and rear Front connections: INLET OUTLET Status indicators POWER ON and NOT READY Equipment: FCM-1200 Modifier Fluid Pump Integrated fluid lines Fluid fittings and valves INLET and OUTLET connections REMOTE interfaces GPIB interface Status indicators Blsdszt Nzhepfx Adhsp IEC power connection Metal housing with service panel Accessories as shown in the pictures Application areas: Mettler Toledo AutoChem systems Laboratory automation Reaction systems Fluid handling Dosing applications Process automation Research and development Scope of supply: 1 × Mettler Toledo AutoChem FCM Fluid Control Module Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Stäubli Type: RS 60 / Controller CS8 C Stäubli RS60 robot with CS8 C controller for demanding pick-and-place applications. Payload: 2 kg Axes: 4 Description: Bedpfozdyq Ujx Adhslp Working range: 600 mm Inner radius: 166 mm Repeatability: +/- 0.01 W x H x D: 810 x 976 x 710 mm Weight: 70 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Mitsubishi Mitsubishi Industrial 6-Axis Articulated Arm Robot Bljdpfxozdyuao Adhep RV Series Industrial Robots Compact and powerful, offering flexible automation and high reliability. The RV series provides a highly dynamic 6-axis articulated arm robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes: 6 Maximum lifting capacity: 3.5 kg Reach radius: 642 mm Weight: 38 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, IPG Ytterbium Type: YLP-C-1-100-20-20 IPG Ytterbium fiber laser with controller IPG Ytterbium fiber laser Condition: used Scope of delivery: (See image) Blsdpfx Adjzdyyvehjp (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Blsdpfx Ajzdy Iaedhep Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Mitsubishi Type: RH-3FH5515-1D1-S15 + CR751-03HD1-0-S15 Mitsubishi Industrial Robot Payload (kg): 3 Degrees of Freedom: 4 Speed (mm/s): 7200 Repeatability (mm): 0.01 Cycle Time (s): 0.44 Max. Reach Radius (mm): 400 Operating Range J1 (degrees): 264 Operating Range J2 (degrees): 282 Operating Range J4 (degrees): 720 Stroke of Z-axis (mm): 180 Controller Type: CR751-D Protection Class: IP20 Power Supply: 1 Phase (VAC) 200-253 Power Consumption (VA): 500 Product Dimensions & Weight Width (mm): 130, Height (mm): 511.5, Depth (mm): 580 Weight (kg): 14 Bodpozd Tutsfx Adholp Condition: used Scope of Delivery: (See Image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Mitsubishi Type: Melfa RV-3SB Industrial 6-axis articulated arm robot 6-axis articulated arm robot RV-3SB Maximum payload: 3.5 kg Weight: 38 kg Robot controller CR2B-574-S312 Bjdpfszd T Uajx Adhslp Teach pendant R46TB with color/touch display Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Köhler Type: HK 500 Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation thanks to a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient temperature +5 – 60°C Humidification temperature: Ambient temperature +5 – 75°C Power connection: 230V, 1 phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Salt solution reservoir: 140 liters Bljdpfx Aozd Umkedhjp Material: Stainless steel (Completely overhauled and converted by the manufacturer to a Comfort control system) - Renewal of all electrical components - Renewal of all hose connections 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, mileage: 34,500 km, power: 88 kW (119.65 HP), first registration: 06/2023, fuel type: diesel, fuel: diesel, CO₂ emissions: 235 g/km, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Equipment: ABS, Bluetooth, air conditioning, airbag, cruise control, power assisted steering, traction control, = Additional Options and Accessories = - 12-volt socket - Passenger airbag - Third brake light - Driver airbag - Height-adjustable steering wheel - Leather steering wheel - Leather gear knob - Phone with Bluetooth = Additional Information = Number of doors: 2 Number of cylinders: 4 Blsdpfxsz D Swwe Adhsp Engine displacement: 2,179 cc Unladen weight: 1,915 kg Payload: 1,085 kg Gross vehicle weight: 3,000 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) BOVAG delivery inspection: Yes Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: good (used), mileage: 476,277 km, power: 375 kW (509.86 HP), first registration: 09/2015, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x4, wheelbase: 3,900 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, total length: 7,440 mm, total width: 2,550 mm, total height: 3,860 mm, loading space length: 3,820 mm, loading space width: 2,500 mm, loading space height: 600 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, parking heater, power mirror, seat heater, tachograph, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Fabric Number of axles: 2, Configuration: 4x4, Tare weight: 13980 kg, Gross vehicle weight: 18000 kg, Total tank capacity: 300 liters, Tow hitch, Axle journal diameter: 50 DIN, Fifth wheel coupling: Fixed, Number of differentials: 3, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 375 kW (503 hp), Engine displacement: 12809 cc, Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Starter battery, System type: ., Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Atlas 190.2E-A4, Year of construction crane: 2015, Crane capacity: 19000, Maximum load: 1230 kg at 12.4 m, Number of support legs: 4, CE certified, Control position: Side control left, Crane position: behind the cab, Hydraulic extension: 4, Hydraulic auxiliary connection: none, Load hook, 4X4 ALL-WHEEL DRIVE WITH CARDAN SHAFT / ATLAS 190.2 CRANE WITH REMOTE CONTROL / 4X HYDRAULIC + 1X MANUAL Transmission Transmission: MB, 12 gears, Automatic Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 8 mm; Tire tread depth right: 10 mm Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 8 mm Weights Tare weight: 13,980 kg Payload: 4,020 kg GVW: 18,000 kg Functional Crane: Atlas 190.2E-A4, Year of construction 2015, behind the cab Height of loading platform: 153 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Bljdpoyrm Dxefx Adhjp Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from different years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry through our website. Ask directly about our European warranty package.