Used Portal Drill for sale (5,646)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 Duedpfx Aboyahv Ssujn CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock.

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t Duodpfx Absfcnu Ioujn WORKING AREA LONG: 5200mm WIDTH: 2300mm HEIGHT: 1000mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AB00003274, overall weight: 865 kg, travel distance X-axis: 3,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 50 mm, TECHNICAL DETAILS Working area X-axis: 3,050 mm Working area Y-axis: 800 mm Working area Z-axis: 50 mm F10L drilling head: 10 spindles Vertical drilling spindles: 7 (independent) Horizontal drilling spindles in X: 1 Horizontal drilling spindles in Y: 2 Integrated saw blade on X-axis: 1 MACHINE DETAILS Control: 7" touch screen display Duedpfxjyfg Ahj Abusn Weight: 865 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, controller model: Ferrocontrol DARC, TECHNICAL DETAILS Upper drilling heads: 3 Duedpfxoydn Eze Abuon Drill spindles per head: 36 Vertical pantographs: 2 Working dimensions: 2,500 x 800 mm MACHINE DETAILS Control: Ferrocontrol DARC EQUIPMENT Electronic drilling machine Automatic loading system with motorized roller conveyor Automatic hinge insertion system Unloading and transport roller conveyor with automatic stop

Condition: ready for operation (used), functionality: fully functional, Submission of a bid obligates timely collection by 27.02.2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT Robust construction Easy and hassle-free spindle head change Pneumatic two-hand control 6-spindle drilling head Useful special accessories for extended machining options Dujdoyfnwtepfx Abuen

Condition: ready for operation (used), Year of construction: 1977, Asquith ODI Mk2 14/54 5MT Radial Arm Drilling Machine Spindle centre to column centre max. 54" Dsdpfjyg Skaox Abuoun Spindle travel 14″ Spindle taper 5 MT Spindle speeds (16) 40-2040rpm, Spindle motor 5.5 HP Spindle emergency brake Power elevation of arm Power locking to arm and head Box Table Coolant 415V Electrics 1977 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79026 Machine Serial Number: P.33677 Cost: £6,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Dusdpsyifhzofx Abuen Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Dusdpfx Absyifhnjuon Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Duedpfoyifhhox Abujn Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, total height: 2,500 mm, total width: 1,000 mm, total length: 2,400 mm, Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No Dsdpfexhcf Nsx Abuoun - Control: Conventional - Drilling depth: 580mm - Spindle speed max.: 2120rpm - Table width: 550mm - Table length: 750mm - Drilling capacity: 55mm - Spindle diameter: 70mm - Max. reach: 1200mm - Spindle speed min.: 47rpm - Transport dimensions: 2400mm x 1000mm x 2500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Dsdpsyh Dr Njfx Abusun Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CMA automatic coordinate drilling machine type GRD 40 CNC 3030 table size: 3000x3000 mm X-axis speed: 18 m/min Y-axis speed: 12 m/min Z-axis speed: 5 m/min spindle-to-table distance: 160-660 mm table height: 770 mm Drilling capacity: Steel 60: 40 mm Dsdjw Tidkepfx Abueun Cast iron: 40 mm spindle speed: 750-3000 rpm Spindle taper: BT40 motor power: 7.5 kW total machine weight: 8,500 kg

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer Dsdpfjb A Rl Iex Abueun -Drilling/Chiseling -SDS Plus: Recording -Transport case -Weight: 5 kg

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Dsdpfsyhph Ejx Abueun Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, bore capacity in steel (diameter) 75 mm spindle taper: MT 5 spindle stroke - max. 380 mm transmission ratio 2 11,2 - 2.000 quill stroke 16 mm feed for quill 1: 16 spindle throat 2000/ 38 mm spindle drive 15 kW weight 7,1 t Thread in steel, strength 600 N/mm² max. M75x4 Vertical swivel arm adjustment max. 950 mm Drill slide adjustment on the swivel arm 1614 mm Distance between spindle nose and clamping surface max. / min. 2000/670 Accessories: Heidenhain Radial digital display, clamping cube 1000 x 750 x 500 mm Dedpfx Aoyh Rqfjbujun Coolant system, work light

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 25 mm throat 255 mm bore stroke 135 mm spindle turning speed range 8, von 105-2900 U/min table-size 500 x 350 mm column diameter 100 mm spindle taper MK 3 total power requirement 0,65 / 0,9 kW Dusdpswqr Ibsfx Abusn weight of the machine ca. 190 kg dimensions of the machine ca. 0,5 x 0,5 x 1,7 m Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: used, diameter 42 - 80 mm length 350 - 520 mm tool adaptor MK4, MK5, MK6 12 twist drills, also available individually: 1 MK6, diameter 80 mm EUR 150.00 1 MK5, diameter 70 mm EUR 90.00 2 MK5, diameter 60 mm EUR 60.00 each 3 MK5, diameter 55 mm EUR 55.00 each 2 MK5, diameter 50 mm EUR 55.00 each 1 MK5, diameter 42 mm EUR 55.00 Dodpfx Abjv Dxx Ujuoun 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 plus VAT Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm throat 300 mm bore stroke 200 mm spindle taper MK 4 spindle turning speed range 55 - 600 U/min table diameter 500 mm Duodpfovlah Hex Abuon column diameter 180 mm feeds 0,07/0,11/0,16/0,22 mm/U total power requirement 1,47 / 1,84 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1,3 x 0,65 x 2,17 m Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price! Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm spindle taper MK 4 column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm distance spindle/base plate 1180 mm engine output 1,5 kW table rotating 360 Grad weight of the machine ca. 335 kg Dodpfxexuv I Rj Abujun dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. The machine has minor transport damage, see picture no. 6. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Duedpfev Iamzox Abuon Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For further information, please contact us

Condition: new, Year of construction: 2026, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 Duedpjby Swhsfx Abujn - Reducing sleeve MK II/MK I Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 60 mm, workpiece height (max.): 15 mm, TECHNICAL DETAILS Max. workpiece width: 60 mm Max. workpiece height: 15 mm Max. workpiece length: 6,000 mm Drilling diameter: 16 mm Saw blade diameter: 350 mm Infeed roller length: 10,000 mm Thread cutting: M12 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Dsdpfx Abeygw Ttjuoun Required space: approx. 12.0 x 2.0 x 2.3 m Machine weight: approx. 3.2 t EQUIPMENT Saw 4 x top drilling units 4 x bottom drilling units 6 x drilling and threading units 2 x countersinking units

Condition: used, Year of construction: 2012, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 150 mm MK 4 480 x 480 mm 0,1 - 0,2 mm/U M 22 (St 60) 35 mm 80-1170 U/min 2,3 kW 350 kg 800 x 1000 x 2000 mm Accessories: - Automatic feed - Coolant device in the foot Duodpfoygm Sfex Abuon - Automatic thread cutting reversal - stepless speed adjustment - adjustable drilling depth stop - spindle protection

Condition: used, bore capacity in steel (diameter) 20 mm bore stroke 150 mm throat 285 mm 2 speeds 150 - 3000 U/min weight 1700 kg dimensions of the machine ca. 1600 x 700 x 1850 mm Equipment: - In-line drilling machine with 3 drilling units - 1 drilling head with right/left rotation - Coolant device Dodsygm R Ujpfx Abueun - drill chuck

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min Dsdpfx Abeyhq T Neuoun spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N