Used Posmill C 1050 for sale (11,542)

Condition: used, Year of construction: 2014, machine/vehicle number: 20141104, Control: Heidenhain iTNC 530,Travel X: 1050 mm,Travel Y: 530 mm,Travel Z: 630 mm,Table size: 1150 x 560 mm,Tool holder: SK 40, Hnjdotqatgspfx Addog

Condition: excellent (used), Year of construction: 2011, operating hours: 18,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, table width: 1,150 mm, table length: 560 mm, table load: 700 kg, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,600 h, number of slots in tool magazine: 30, tool length: 250 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, including Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Hsdpfsxzhfnex Addsng Equipped with M&H probing system / tool measurement with 1x POSfix 100mm vise (see left) with 1x quadruple clamping system (see center) Magazine with 30 tool positions, SK40 tool holder. Internal coolant supply, through-spindle air, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, even fewer hours on the Lehmann 4th/5th axis. Viewing under power is welcome by prior arrangement, (almost) anytime. Single-operator use (the machine was exclusively operated by myself). The reason for sale is a private accident about two years ago. For further questions and for optional accessories regarding the machine or Lehmann 4th/5th axis, I am gladly at your disposal. Note: The LANG clamp and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for demonstration purposes only!

Condition: good (used), Year of construction: 2012, Posmill C 1000, year of manufacture 2012, Fanuc Oi 100 control, travel X/Y/Z 1000/530/630 mm, 30-position tool changer, BT 40, spindle speed up to 10,000 rpm, table size 1150 x 560 mm, max. table load 700 kg, Hexagon infrared touch probe, Hexagon infrared tool measurement system, internal coolant supply (IKZ) 20 bar. Hedpfjxgfdrjx Addeng

Condition: used, Year of construction: 2013, travel -x axis 800 mm travel -y axis 520 mm travel -z axis 550 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min numbers of positions in the tool changer 24 520 x 950 (B x L) mm Milling machining centers - vertical | POSmill - C 800 Kompakt equipped with 24- way tool changer and ITC. The machine is in a well-maintained condition. Hjdpfx Asv Td Iajddeng For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C800 | C-800 | C800Kompakt | C -800-Kompakt

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Load center: 500 Hedpfsw Sp A Rjx Addsng ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: New Description: Brand new fork positioner, build width 1,050 mm, opening center-to-center 250 to 950 mm, brackets for standard forks, with sideshift valve.

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, Posmill C1050 3-Axis Machining Center (2010) Manufacturer: POSmill Model: C1050 3-Axis Machining Center (2010) Year of manufacture: 2010 Machine type: 3-axis machining center Condition: Powered on, ready for immediate use Operating hours: approx. 29,800 h Spindle hours: approx. 9,000 h CNC Control: iTNC 530 Spindle speed: 10,000 rpm Tool magazine: 30 slots X-axis (mm): 1,050 Y-axis (mm): 530 Z-axis (mm): 630 Distance spindle/table (mm): 85-715 Accessories: Documentation Hsdpfsx Iv Hvex Addeng Chip conveyor Coolant system 30-position tool changer Linear scales on all axes X / Y / Z 3D probe Electronic handwheel Available immediately.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 110 mm -Piston rod: Ø 60 mm -Cylinder tube outer diameter: Ø 115 mm Hnjdpfxodcpi Uj Addjg -Stroke: 1200 mm -Total length retracted, center to center of hole: 1465 mm -Piston rod mounting: Ø 30 mm -Cylinder mounting: Ø 30 mm - Universally applicable: -Number: 2 cylinders available - Price: per piece -Dimensions: 1530/115/H130 mm -Weight: 62 kg/piece

Year of construction: 2024, condition: as good as new (ex-display), 12-month warranty, in-stock item, new device - Model on castors - Maximum temperature: 300 °C - Oven chamber volume: 1,050 liters - External dimensions: 1,470 x 970 x 1,920 mm (W x D x H) - Oven chamber dimensions: 1,200 x 670 x 1,400 mm (W x D x H) - Controller C550 with 10 programs, each with 20 steps Additional equipment: - Port for thermocouples: inner diameter 44 mm - VCD process documentation (CD): Analysis via Nabertherm VCD software with Ethernet port, software for visualization, control, and documentation - Horizontal, forced air circulation results in a temperature uniformity according to DIN 17052-1 of better than +/- 5 °C in the empty usable space (with exhaust flap closed) - Maximum batch weight: 250 kg with distributed load - Maximum load per rack: 30 kg with distributed load - Reinforced floors and rails for 80 kg distributed load available on request - Supplied racks: 4 pieces - Maximum number of racks: 14 pieces, available at short notice - Connected load: max 9.3 kW - Fan capacity: approx. 500 m³/h Hnedjiqkr Ispfx Addog - Connection: 380-415V 3/N/PE 50 Hz - Net weight: 450 kg - Documentation, CE Declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg Inspection in our warehouse possible at any time! The oven is not to be used for solvent-containing substances, or for heating food, animals, wood, grain, etc. Oven, ovens, industrial oven, heating cabinet, thermal oven, laboratory oven, drying oven, tempering oven, test chamber

Condition: used, This listing is for theC Technologies IN-VPE-Flows Flowpipe The unit is in full working condition and is ready for immediate use Hnodpfxsxhfqus Addog 1. CTech™ FlowVPE or FlowVPX Systems These are variable pathlength UV–Vis spectrophotometer systems designed for inline process monitoring in bioprocessing. The FlowVPE System is built for flexible measurement configurations and lab-to-manufacturing scalability, while the FlowVPX System is tailored for GMP environments with compliance capabilities

Condition: good (used), Transformer, converter, inverter, three-phase autotransformer -Input: 220 V -Output: 29.5 V 17 A -Technical data: see photos Hsdpfx Adjb S Htdodjng -Quantity: 2 available -Price: per piece -Dimensions: 140/120/H120 mm -Weight: 12 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C5300s colour production system. Item for sale: Hnedpfsx Sqhpex Addeg 1 x Ricoh Pro C5300s with the following equipment: Includes Fiery Controller E-27B Includes Paper Deck LCIT RT5140 Includes Finisher SR5110 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 362,341 pages Colour: Approx. 186,591 pages Black: Approx. 175,750 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing Hnjdpfxox D Dx Ae Addsg • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Year of construction: 2019, condition: new, Brand C&U Group Shanghai Bearing Co Ltd Model: TM6307/41RS Year of manufacture: Unused Weight (kg) approx 6790 net Number of pieces in stock 17350 ( approx ) Hjdpfx Adsqa Anqjdong Made in China Comments Contact us for min. quantity Terms of sale Contact us for min. quantity

Condition: like new (used), functionality: fully functional, Year of construction: 2023, degree of automation: automatic, total length: 3,700 mm, total width: 4,700 mm, total height: 5,000 mm, year of last overhaul: 2023, Equipment: documentation/manual, The Evolvo Sp2 wrapping machine can be equipped with a film cutting system and a film sealing system. With the second pallet position, pallets can be continuously placed and removed in a steady flow, without needing to double-handle the pallets. The forklift operator can wrap continuously without having to leave the forklift. All this, without leaving any film tails. The advantages of an automatic line, but for a significantly lower investment. Truly all the benefits in one machine! Installation: - Year of manufacture: 2023 - Delivered: end of 2023 Setup for use: - Installed for stretch net wrapping at our facility - Also suitable for film with automatic cutting Asking price for wrapper: EUR 22,500 excl. VAT Asking price for stretch net: EUR 6,500 excl. VAT Details: Hsdpsx Rbr Nofx Addsng - Double pallet position enables continuous wrapping process - List price approx. EUR 30,500 excl. VAT - Includes Troax safety fences - Includes 75 rolls of stretch net (list price EUR 116 each, 5,000 m per roll) Dimensions: - Net (wrapper + pallet positions): 370 x 470 cm - Gross (current fence layout including wrapper): 450 x 950 cm - Troax safety fences: 2x 450 cm – 1x 250 cm; all 140 cm high

Condition: ready for operation (used), sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, power: 17 kW (23.11 HP), total length: 4,400 mm, total width: 2,200 mm, total height: 2,205 mm, empty load weight: 10,500 kg, workpiece length (max.): 3,100 mm, cnc backgauge cnc cutting angle cnc knife play CNC ELGO Strokes/min: 11 > 40 str/min Hedpfxox Immgs Addjng Adjustable cuttingedge: 0,5° > 2,5°

Condition: good (used), The depth bar is suitable for a stand depth of 1,050 mm and a crosshead width of max. 40 mm. The scope of delivery includes: 01x depth bar, used Material color: orange total length: approx. 1.058 mm f. depth of upright: approx. 1.050 mm clear span: approx. 960 mm Technical data for the depth bar: Shelving system: Nedcon profile dim.: 60 x 40 mm crossbar support: approx. 43 mm material thickness profile: approx. 1,50 mm Hnjdpfx Aeh Hni Noddsg material thickness support: approx. 4,00 mm Unit weight: approx. 2.50 kg General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), Year of construction: 2022, operating hours: 3,000 h, CNC Milling Machine POSMILL E 2050 Year of manufacture: 2022 Spindle hours: 730 h Heidenhain TNC 640 Technical Data: X-axis: 2050 mm Y-axis: 1150 mm Z-axis: 700 mm Table clamping area: 2200 x 100 mm Power milling spindle: S: 10,000 rpm Hsdjxz Dlqepfx Addjng ISO 40 Tool changer for 60 tools Heidenhain linear measuring system X, Y, Z Control cabinet extension for 4th and 5th axis

Condition: good (used), The scope of delivery includes: 01x C-profile, used profile dim.: C: 50 x 50 x 15 mm Material color: sendzimir galvanized total length: approx. 2.775 mm material thickness: approx. 2,00 mm weight / pcs.: 7,080 kg Your contact person in our company: Mr.: Andre Evering Hnedpfonfvbpsx Addog Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm material color: sendzimir galvanized total length: approx. 1.865 mm center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Hjdpfonbd Urox Addeng General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), Scope of delivery includes: 01x C-profile, used Material color: Sendzimir galvanized Overall length: 7,200 mm Profile dimensions: C 360 x 100 x 35 x 10 mm Material thickness: approx. 4 mm Hnjdpfx Aew Hgwcoddsg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be inquired about with us separately depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x depth bar, used Shelving system: SSI Schäfer Material color: blue Total length: approx. 1,060 mm f. Upright depth: approx. 1,050 mm Clear span: approx. 928 mm Profile dimensions: U 50 x 50 mm Cross beam support: approx. 65 mm Material thickness: approx. 3 mm Unit weight: approx. 3.53 kg The depth bar can be used for the following traverse profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm IPE: 100 x 55 mm INP: 120 x 60 mm Box profile widths: - 40 mm - 50 mm - 60 mm General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Hodpfx Adjlq Ewwsdong

Condition: good (used), The depth bars are suitable for a stand depth of 1,050 mm and a crosshead width of max. 40 mm. Included in delivery are: 180x depth bar, used Material color: orange total length: approx. 1.058 mm f. depth of upright: approx. 1.050 mm clear span: approx. 960 mm Technical data for the depth bar: Shelving system: Nedcon profile dim.: 60 x 40 mm crossbar support: approx. 43 mm Material thickness profile: approx. 1,50 mm material thickness support: approx. 4,00 mm Hnsdpfx Aelp N Utoddeg Unit weight: approx. 2.50 kg Note: The price is only valid with a purchase of at least 180 pcs (01x pallet).

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized total length: approx. 1.015 mm center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Hodpfxenbfape Addeng Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery: 01x C-profile, II. choice Manufacturer: SSI Schäfer Material color: sendzimir galvanized total length: approx. 1.510mm profile dim.: C 100x60x10 mm material thickness: approx. 3,0 mm Remark: - Since this is a used product may be damaged, holes, welds or other rust approaches may be present. General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet Hnsdpfx Adoh T Avxsdsg (without unloading)

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank Here we offer you a used load distributor of the manufacturer Dexion for purchase. These can also be used for other manufacturers. The load distributors are designed for a shelf life of 800 mm suitable. Included in the scope of delivery: 01x load distributor, used Material colour: completely galvanized Total length: approx. 980 mm C-profile dimension: approx. 185 x 35 mm Opening for shelf feet: approx. 115 mm Weight / piece: approx. 10,074 Kg To distribute the field loads over a larger area. Our services at a glance: (prices on request) Mounting, construction our general terms of assembly are to be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out in accordance with the Requirements of BGR 234 visual inspection for all rack systems Delivery with our own vehicle fleet Hsdpfxedvad Ee Addong (without unloading)