Used Milling Head for sale (16,911)

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Gbjdpfxjzlar Uo Al Sju Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: good (used), functionality: fully functional, Internal article number: 26092 Godpjz Ha Eusfx Al Sjbu Original Deckel high-speed milling head SK40 Compatible with Deckel FP1 / FP2 Well-maintained original condition! This high-speed milling head comes from an educational institution and is in good condition.

Condition: excellent (used), 1 used, partially overhauled vertical milling head with large overhang suitable for drilling machines manufactured by PAMA (origin: Italy) or other manufacturers Spindle mount: SK 50 Overhang: 660 mm Flange size: 465 x 440 mm Inner bore: 294 mm Gjdpfxoz Euydj Al Sjbu Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions L x W x H: 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Stepless angle adjustment, manual • 4 fixed indexing points, each 90°, with dowel pins • Tool clamping with tightening rod • For retrofitting to conventional, NC or CNC milling machines or drilling machines of any type, L-R pivoting, manual tool clamping, … The following partial overhaul was performed: - Grinding of the SK 50 tool mount on the milling spindle - Replacement of the bearings in the milling spindle - New shaft seals Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2025, 2025 Takisawa EX-2000YS Turn Mill Model EX-2000YS Twin Spindle CNC Lathe With Fanuc Series OI-TF Plus Control With Dual Toptek BL-3000 Bar Feeders 2 Power Collet Chucks. Maximum Swing Ø800mm. Standard Turning Ø250mm. Maximum Turning Ø390mm. Maximum Turning Length 510.5mm. Distance Between Centres 787mm. Maximum Bar Capacity Ø65/52mm. Axis Travel 'X'=250mm, 'Y'=±50mm, 'Z'=590mm, 'B'=570mm. Rapid Traverse 'X'=30m/min, 'Y'=10m/min, 'Z'=36m/min, 'B'=36m/min. Maximum Main Spindle Speed 4,500rpm (15/11kW Motor), Maximum Sub Spindle Speed 5,000rpm (15/11kW Motor), Maximum Rotary Tool Spindle Speed 4,000rpm (15/11kW Motor). 12 Position Turret. Turning Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. Run Hours 1,085. Bar Feeder Lengths 4.35m. S/No. CZ02EX2153 (2025). Gbjdpfx Aljz Rqm Sj Sou With Coolant System, Chip Conveyor, Foot Switches, Signal Tower & Oil Skimmer. Overall Dimensions L2,600 x W1,932 x H1,800mm. Weight 5,900kg. Please note this asset is located at No. 718, Sec. 2, Yanghu Rd., Sanhu Vil., Yangmei Dist., Taoyuan City 326, Taiwan. Deadline for collection is December 11th 2026.

Condition: refurbished (used), functionality: fully functional, Refurbished milling head from Pfauter PE150. Gbodpfozr Hc Tox Al Ssu

Condition: used, Year of construction: 2008, 2008 MAZAK QTN-450M-II Nexus CNC Turning Centre with MAZATROL Matix Nexus CNC Control Maximum Swing Ø845mm. Maximum Machining Diameter Ø584mm. Distance Between Centres 1,000mm. Axis Travel 'X'=340mm, 'Z'=1,070mm. Maximum Spindle Speed 2,000rpm (37kW Motor). Maximum Rotary Milling Speed 4,000rpm. 12 Position Turret. S/No.201914 (2008) Any Bidder MUST and CAN ONLY USE the Baker Hughes Approved Contractors to Work Onsite. Please see the Essential information tab for more details. Gjdpfx Alsz Rqlbj Sjbu With Coolant System, Chip Conveyor, Traveling Steady & Oil Mist Extraction Unit. Weight 13,000kg.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" Gbsdpfxoz Adz Is Al Ssu • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Gjdjzr Hd Rspfx Al Sebu

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" Mount ISO 40 Overhang 300 mm Centering flange diameter 125 mm Rated drive power 10 HP Max. speed 1800 rpm Gedpfx Aljz Adz Us Ssbu Milling head dimensions L x W x H approx. 375 x 245 x 300 mm Weight approx. 80 kg Accessories / Special features: • Manual tool clamping • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered interfaces are manufactured according to the "KLINGELBERG" system • The main spindle's roller bearings consist of tapered high-precision rollers • 1 tool clamping screw The spindle and gear bearings have been completely renewed! Design: standard, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm Gbodsd Nz Dpopfx Al Sju -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Condition: reconditioned (used), functionality: fully functional, The used MIND DART DL4 rapid-feed milling machine is particularly suitable for tooling work, thanks to its tilting head and the ability to use a quill (including with automatic feed) with automatic lubrication of the guides. Gbjdpfx Ajznvmyol Sju Equipped with independent automatic feeds, it also includes a dividing head with tailstock and related gears, dividing set, and some tools. The machine has been refurbished to meet standards and is in perfect working order.

Condition: new, 1 brand-new 90° vertical milling head for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, with L-R swivel function, manual tool clamping. Technical data: Spindle mounting: ISO 50 Designed drive power: 22 kW Maximum speed: 3000 rpm Overhang: 350 mm Arbor support: Ø 180 mm Gjdpfx Aez Dqx Tjl Ssbu Outer diameter of mounting surface: Ø 306 mm Head height: 441 mm Weight: 115 kg Accessories / Special features: • Manual tool clamping • The main spindle and all shafts and components are made of case-hardened and tempered chrome-nickel steel • 1 rotatable axis (left/right) • Ground gears • The rolling bearings of the main spindle consist of tapered high-precision rollers • Tool clamping with draw rod Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, POWERLOCK MOUNTED MILLING HEADS, price €7,500 Two cabinets filled with milling heads for various applications, approximately 45 pieces. Working dimensions in mm: 40 - 1 piece 60 - 12 pieces 80 - 7 pieces 100 - 9 pieces 130 - 3 pieces 140 - 1 piece 150 - 7 pieces Gbedpozxguisfx Al Sju 170 - 3 pieces 180 - 2 pieces

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Godpfx Ajyf Dp Eel Sebu Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC Gedpfjyahv Sjx Al Ssbu CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible. Godpfjxl Upzox Al Sjbu

Condition: used, inner taper of milling spindel / Gbsdpfxszcq Hrj Al Seu collet diameter / turning speed range / U/min

Condition: used, inner taper of milling spindel / Gbjdpfxezcq H Eo Al Sju collet diameter / turning speed range / U/min

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling Godpfx Alsb Iwrij Sobu -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with hydraulic tool clamping and electric tool release signal Model: KFU-2-45, version 021 Technical data: Spindle mount, DIN 2079: ISO 50, for tools according to DIN 69871 + 69872, Type A Overhang: 377 mm Max. speed range: 3500 rpm 3750 rpm 50% duty cycle/hour 4000 rpm 30% duty cycle/hour Max. drive power: 15 / 22 kW Operating pressure for tool release: 80 + 5 bar Dimensions L x W x H: 450 x 305 x 360 mm Weight: approx. 180 kg Accessories / Special features: • 2 manual swivel table systems "HURON" • Hydraulic tool clamping Gbodpjy Uby Iofx Al Sju • Electric tool release signal • For retrofitting to conventional, NC or CNC milling machines or boring machines (e.g.: AUERBACH, UNION, MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, ARSENAL, ...) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: excellent (used), Year of construction: 2018, operating hours: 9,219 h, functionality: fully functional, machine/vehicle number: 2730218, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhaim, controller model: HAIDENAIN TNC 530 HSC, total height: 4,070 mm, total length: 6,800 mm, total width: 6,500 mm, table width: 1,300 mm, table length: 1,800 mm, table load: 6,000 kg, overall weight: 19,000 kg, spindle speed (max.): 3,500 rpm, operating hours of spindle: 9,219 h, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, MACHINE FEATURES Model: RTX 25 TG130 Serial Number: 2730218 RTX Series Features Structure: Fixed bed and moving column. Movements: Longitudinal table and transverse column with constant support. Rotary Table: Replaces the fixed rectangular version for continuous machining operations. Head: Bi-rotational head as standard for maximum flexibility. Type: Universal milling machine with fixed bed. Applications: Precision mechanical machining and complex profiles. Construction: Designed and assembled in Turin by Goglio Milling Systems. Travels Longitudinal Travel (X-axis) 2500 RCV UL1007 Gbedpfx Aloyn Rduo Ssu Transverse Travel (Y-axis) 1700 RCV UL1007 Vertical Travel (Z-axis) 1500 RCV UL0714 Rotary Table TG-130_1300x1800 Spindle Motor Power 24 kW Maximum Spindle Speed 3500 rpm Rapid Traverse Rate X-axis (CNC) 15,000 mm/min Rapid Traverse Rate Y-Z axis (CNC) 15,000 mm/min Rapid Traverse Rate Axes (Manual) 6,000 mm/min Working Feed Rate (CNC) 10,000 mm/min Working Feed Rate (Manual) 2,500 mm/min Continuous Torque Motors X-Y Axis 36 Nm Continuous Torque Motors Z Axis 36 Nm Tool Holder Electro-hydraulic Spindle Taper ISO 50, Tool Drawbar BIR 200 Maximum Permissible Load on the Table 6,000 kg Bi-rotational Head Continuous for B-axis 0 - 360° Module Rotary Table Coupled to Hydraulic Rotating C-axis 0 - 360° continuous Machine Chiller Yes Tool Magazine 32 Positions Operating Temperature 10-40 degrees C Base Machine Mass 19000 Kg CNC HEIDENHAIN TNC 530 HSCI

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 3000 – Our high-performance cutter head debarker for flexible log processing. Our StoMill 3000 is a versatile cutter head debarking machine for the efficient processing of logs with diameters up to 1,200 mm. Log lengths up to 18 m can be processed by manually feeding them in; an automatic infeed system can be integrated on request. The machine can optionally be equipped with a root reducer, thus enabling debarking and root reduction in a single process. Feeding is carried out using a forklift or crane. A touch display and a 16-channel wireless remote control ensure comfortable operation. The StoMill 3000 is therefore ideally suited for operations with varying requirements for wood preparation. Gjdpfx Aljrk Nk Ee Sebu Description: For fully automatic debarking and root reduction of hardwood and softwood. Advantages of the system: • Cutter head debarker and root reducer in one machine • Patented safety cutter blade shaft • Fully automatic process • Operation via wireless remote control • Low energy consumption Technical data: • Debarking shaft with 22 kW or 30 kW drive power • Reducer shaft with 15 kW - 45 kW drive power • For all logs with a length of 2 meters or more • Log diameter: 20 – 120 cm Options: • Chip box • Scraper conveyor for chip discharge • Log ejector / log collection tray

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment Gbodpfxsznn Hrs Al Seu - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: good (used), I will sell Benz angle heads. Price given for 1 pc. Gbjdpjv Up Hwsfx Al Ssu - 4-40370 -4-40371

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Gsdpszdbxbefx Al Ssbu Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany