Used Powder for sale (1,133)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls Equipment: -+2° C to +10° C -GOVI 1600N Nodpszy A Ihjfx Ah Sjdc -40mm insulated wall Net price: €9,151.26 / Gross price: €10,890.00 Article number: UC6226301519.01 Technical data: • Brand: Unsinn • Model: UKT 6C 3015-26-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 300 x 150 x 190 cm • Exterior dimensions (L x W x H): 441 x 207 x 251 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,600 kg • Tare weight: 825 kg • Payload: 1,775 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Loading area made of multi-layered glued screen printing board, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich body • Interior and exterior shell made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door double-wing with aluminum hinges • Refrigerated compartment pressure lever lock and stainless steel door latch • Rear frame and edge profiles made of special aluminum profiles, anodized for aesthetically pleasing design • Impact protection 200 mm at the bottom, wraps around 3 sides • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigerated room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing, mounted on the front side at the top • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230 volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Automatic reversing function • Plastic mudguards • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific wishes! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable Equipment: - Low loading platform - 10 lashing points - Shock absorbers + 100 km/h approved Net: €3,359.66 / Gross: €3,998.00 Article number: UNA114261515.01 Technical data: • Brand: Unsinn • Model: UA 2615-7-13 • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 260 x 155 x 15 cm • External dimensions (L x W x H): 403 x 205 x 78 cm • Loading height of the floor: 46 cm • Permissible total weight: 1,400 kg • Unladen weight: 370 kg • Payload: 1,030 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Body made of sturdy steel profile, 3-sided, galvanized and powder-coated in black-gray (RAL 7021) • Continuous ramp enables driving onto the platform across the entire width • Attachment points at all corners for e.g. tarpaulin frame • Foldable license plate holder • Sturdy plastic mudguards • 8 foldable lashing points in the side wall profile • 1 lashing point in the end wall profile • 1 lashing ring on the loading platform at the rear, in the center • Reinforced, automatic support wheel for safe parking of the loaded trailer • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • Angle of approach in the lowered state approx. 6° • License plate holder at the rear, can be swiveled away for loading • Reversing automatic • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Nsdpfezy A I Ijx Ah Sodc Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Sandwich construction Equipment: - Lashing rails - 8x lashing eyes - 30mm insulated wall Net: €7,050.42 / Gross: €8,390.00 Article number: TKC227401820.02 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 870 kg • Payload: 1,830 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, screwed V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor panel made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aluminum ramp • Non-slip, with gas springs • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With twist-lock closure, lockable • Loadable with max: 800 kg • 2x maneuvering handles at the front • Rear frame made of hot-dip galvanized steel, welded • 8 lashing eyes recessed in the floor (750DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! Ndjdpfxjzy Dbpe Ah Soc - Feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Motorcycle Stand Features: -LED lighting -foldable -can be stored upright Net price: €2,436.14 / Gross price: €2,899.00 Article number: LMT275241700.01 Technical data: • Brand: Lorries • Model: MT-2 • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 240 x 174 x 0 cm • External dimensions (L x W x H): 349 x 240 x 96 cm • Permissible total weight: 750 kg • Unladen weight: 249 kg • Payload: 501 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • HALF-FOLD system, allowing you to fold the trailer in half to save space for storage • Folded dimensions: 250 x 239 x 90 cm (H x W x D) • Lowerable loading platform via a hand winch • Stable frame construction • Frame galvanized and then powder-coated in an elegant black color • Trailer can be stored upright • Closed floor made of aluminum tread plate • Rear floor with ramp over the frame • Wheel holder (motorcycle stand) for stable fixation of the motorcycle • Optionally also with rear wheel holder • Suitable for transporting up to 2 motorcycles • Optionally expandable with 2 possible bicycle holders in the middle between the motorcycles • Foldable, galvanized + powder-coated tubular drawbar • Plastic mudguards • 12 lashing points distributed on the loading platform • Maintenance-free rubber spring axle Nedpfszy Dhcox Ah Ssdc • 13-pin connector • Large-sized LED safety lighting • Integrated rear fog light • Support wheel mounted _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door, sandwich construction Equipment: - 6 lashing eyes - Lashing rails - 30mm insulated wall Net price: €8,983.19 / Gross price: €10,690.00 Article number: TKC227351820.09 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 810 kg • Payload: 1,890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish plywood • Many crossmembers, resulting in high point load capacity • Body made of very strong steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, approx. 70cm, with three-bolt safe locking system, can be locked from the inside and outside • Ramp & door combination • Aluminum loading ramps can be switched to wing doors • Loading possible via ramp or also with a forklift from the rear • Non-slip with gas struts • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With swivel latch, lockable • Load capacity max: 800 kg • Continuous interior height: approx. 200cm • Continuous interior width: approx. 180cm • 2x maneuvering handles at the front • Rear frame on hot-dip galvanized steel, massively welded • 6 lashing brackets embedded in the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing aid automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center Ndsdjzy Dkdepfx Ah Soc _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Rear doors, Smooth exterior walls Equipment: - 40mm insulated wall - +2° C to +10° C - GOVI 1600N Net: €8,025.21 / Gross: €9,550.00 Item number: UC6113251319.01 Technical data: • Brand: Unsinn • Model: UKT 6C 2513-13-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 250 x 135 x 190 cm • External dimensions (LxWxH): 391 x 192 x 248 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 625 kg • Payload: 675 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid aluminum chassis for safe driving characteristics • Loading area made of multi-layer glued screen-printed plywood, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich construction • Interior and exterior skin made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door, double-wing with aluminum hinges • Refrigeration unit toggle fastener and stainless steel door latch • Rear frame and trim profiles made of special aluminum profiles, anodized for aesthetically pleasing appearance • Impact protection 200 mm at the bottom, all around • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Fully encapsulated unit with "outdoor" housing mounted on the front at the top • Environmentally friendly, CFC-free refrigerant • Electronic defrosting system for the evaporator • The control display is lockable and therefore protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • 230-volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse drive automatic • Plastic mudguards • 13-pole plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load-bearing capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. Ndedszy Dwqspfx Ah Sec - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically lowerable, motorcycle chock, bicycle carrier Nedpfezy Dxzjx Ah Sjdc Features: - LED lighting - Foldable - Rear wheel guide Net price: €2,306.72 / Gross price: €2,745.00 Article number: LMT175241011.01 Technical data: • Brand: Lorries • Model: MT-1 • Vehicle type: Motorcycle trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (German technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 238 x 104 x 0 cm • External dimensions (L x W x H): 332 x 173 x 96 cm • Permissible total weight: 750 kg • Unladen weight: 175 kg • Payload: 575 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • HALF-FOLD system, allowing you to fold the trailer in half to save space for storage • Folded dimensions: 233 x 171 x 65 cm (H x W x D) • Lowerable loading platform via hand winch • Stable frame construction • Frame galvanized and then powder-coated in an elegant black color • Trailer can be stored upright • Closed floor made of aluminum tread plate • Rear floor with ramp over the frame • Wheel holder (motorcycle chock) for stable fixation of the motorcycle • Suitable for transporting one motorcycle and 2 bicycles • Foldable, galvanized + powder-coated tubular drawbar • Plastic mudguards • 8 lashing points distributed on the loading platform • Maintenance-free rubber spring axle • 13-pole connector • Large-sized LED safety lighting • Integrated rear fog light • Support wheel mounted • 2x bicycle carriers for mounting on the loading platform (unmounted) • 1x rear wheel guide for stabilization (unmounted) _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 240900085, overall weight: 410 kg, total length: 1,000 mm, total height: 2,150 mm, space requirement width: 1,350 mm, Filter and extraction unit with automatic cleaning. Suitable for fume extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 9/2024 Model designation: 5201053763420 Serial number: 240900085 Motor: 3 kW - 400 V Number of filter cartridges: 3 Raw gas inlet: 250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,350 x 1,000 x 2,150 mm Weight: 410 kg Note: Excluding installation, commissioning, and transport. Ndedpfezww T Tox Ah Sec Subject to prior sale.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 630 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - Speed limiter - Catalytic converter - Automatic climate control - LED lighting - Air suspension - Air-suspended seats - Particle filter - Radio/Multimedia system - Disc brakes - Sun visor - Lane keeping assistant - Windshield - Additional steering axle Internal number for customer inquiries: 6-069 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 Mercedes-Benz Actros 2648 L 6x2 PRO CABIN Air suspension Front + Air suspension rear !!! as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235 or F255, each with 4 or 6 extensions Vehicle: SECONDARY OIL RETARDER HIGH PERFORMANCE ENGINE BRAKE ENGINE OM471, R6, 12.8 L, 350 KW (476 HP), 2300 NM ENGINE VERSION EURO VI, E TRANSMISSION G 281-12/14.93-1.0 (12-speed automatic) AUXILIARY DRIVE, SINGLE 385/65 R 22.5 315/80 R 22.5 TANK 630 L ADBLUE TANK 75 L, TOW HITCH, STANDARD, D50, VBG (40mm also possible, would be exchanged) DISC BRAKE, ON FRONT AND REAR AXLE CAB VERSION PROCABIN L CAB CAB WIDTH 2.50 M HOT WATER AUXILIARY HEATER, CAB DRIVER'S AIR-SUSPENDED SEAT, COMFORT LEATHER STEERING WHEEL COMFORT UPPER BUNK, WIDE, ADJUSTABLE COMFORT LOWER BUNK REARVIEW CAMERA, TOWING VEHICLE MULTIMEDIA COCKPIT INTERACTIVE 2 WITH NAVIGATION SYSTEM AIR CONDITIONING LED HEADLIGHTS, LED TAIL LIGHTS, LED INDICATORS, FOG LIGHTS LED CRUISE CONTROL AIR HORN Packages: COMFORT PACKAGE, WITH EXTRA PREMIUM COMFORT MATTRESS CLIMATE PACKAGE, WITH NOISE/HEAT INSULATION SAFETY PACKAGE, WITHOUT ROLL STABILITY CONTROL NOISE REGULATION, ACCORDING TO UN-R 51.03 LEVEL 2 DRIVING PACKAGE SMOKER'S PACKAGE CHROME PACKAGE, INTERIOR VEHICLE DESIGN ACCORDING TO GSR, PHASE C MERCEDES-BENZ ONROAD SERVICE ATS WARRANTY ACCORDING TO GENERAL TERMS AND CONDITIONS, 3 YEARS/450,000 KM ATS WARRANTY ACCORDING TO GENERAL TERMS AND CONDITIONS, 4TH YEAR/600,000 KM Superstructure: Platform: Dimensions 6,600 x 2,480 x 1,000 mm Side boards 1x divided (2 flaps) per side, with sideboard relief Substructure: Steel construction KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg plates including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slew range 400° Double articulated boom system with PROL1NK (overextending boom arm up to 15°) electronic overload protection with FX500 Fassi RCS radio maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slew limitation adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic with 4-stage and 6-stage extension in stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with return oil utilization and internal oil passage -Double articulated boom with Power Link Plus 15° -Slew bearing with slew cylinders -Slew range 400° -Electronic HPLS control unit (for two pressure ranges) -Single outrigger control... Ndodpfozw Aarox Ah Ssc

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 617 kg, maximum load weight: 2,083 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, rear tipper, electric operation NEW VEHICLE Internal dimensions: 276cm x 170cm Side panel height: 30cm Loading platform height: 65cm Total weight: 2700Kg Payload: 2083Kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on the wood floor Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging the battery Automatic jockey wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangle reflectors Nsdpfszxrvxsx Ah Sodc Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated loading ramps 2800Kg -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on tilted vehicle -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side panels 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration document €200 net Images are for illustrative purposes only and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 685 kg, maximum load weight: 2,015 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, Rear Tipper, Electric Operation + Integrated Aluminum Ramps NEW VEHICLE Internal dimensions: 276cm x 170cm Side panel height: 30cm Loading platform height: 65cm Total weight: 2700kg Payload: 2083kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axles with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging the battery Integrated aluminum ramps in ramp compartment, 2.8T load capacity Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pole plug LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE STARTING IN FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -Charger -Remote control Nsdpozxtgrefx Ah Sodc -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on a tipped vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bow -High tarpaulin 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document €200 net. Images are for illustrative purposes and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers.

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nedpozxtz Nefx Ah Sodc Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 642 kg, maximum load weight: 2,058 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 2700 2 + integrated loading ramps NEW VEHICLE Internal dimensions: 406cm x 204cm Side board height: 35cm Loading area height: 66cm Total weight: 2100Kg Payload: 2113Kg braked tandem trailer overrun brake and handbrake by KNOTT 2x 1350 Kg axle with brake and automatic reversing system low chassis fully welded, hot-dip galvanized steel frame integrated aluminum loading ramps in ramp compartment, 2.8T load capacity 35cm aluminum profile side boards with tensioning fastener foldable and removable on all sides 15mm thick, non-slip and robust screen-printed wood floor automatic jockey wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg tensile force reinforced 13" C tire with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front rear lamps with reversing light and triangular reflector OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -rope winch AL-KO 12.5m -Black Edition (powder-coated side boards and rims in black) -steel plate on floor panel -complete LED lighting -theft protection -net, fine or coarse mesh -H-frame -leaf guard in various heights, also closed -extension side boards 30cm with tensioning fastener -flat cover with or without bow -high cover 180cm or 200cm further accessories on request! plus freight to Gera and vehicle registration certificate 200 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate collection. Njdpfx Ajzxxkish Sedc The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: Ndodpfxjz Iww Re Ah Ssc 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes Nedpfx Aoz Ixfvjh Sedc - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. If you are interested, please contact me.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Nodjzvxvaspfx Ah Sodc Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 410 kg, maximum load weight: 1,590 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 2000 Rear Tipper ⭐ NEW MODEL ⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 67cm Total weight: 2000kg Payload: 1590kg Braked two-axle trailer Overrun brake and handbrake by Knott Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve Ndjdpfsz H Uw Ejx Ah Ssc M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Hand pump with adjustable handle OPTIONAL ACCESSORIES -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tilting mechanism -Charger -Remote control -Bluetooth remote control -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf screen in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bow -High cover More accessories available on request! Plus vehicle registration document and shipping costs from the manufacturer to us: €200.00 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 410 kg, maximum load weight: 1,590 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,560 mm, loading space width: 150 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 256 150 2000 Rear Tipper ⭐ NEW MODEL ⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 67cm Total weight: 2000kg Payload: 1590kg Braked two-axle trailer Overrun brake and handbrake by Knott Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on the wood floor Automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber supports Hand pump with adjustable handle OPTIONAL ACCESSORIES -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Black Edition (Powder-coated sideboards and rims in black) -Ramps -Electric tilting mechanism -Charger -Remote control -Bluetooth remote control -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf screen in various heights, also closed -Extension sideboards 30cm with tension lock -Flat cover with or without bow -High cover More accessories available on request! Plus vehicle registration document and shipping costs from the manufacturer to us: €200.00 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Nsdez Iaanepfx Ah Ssdc In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Visit us online or come by!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-22, empty load weight: 285 kg, maximum load weight: 1,715 kg, overall weight: 2,000 kg, axle configuration: 1 axle, loading space length: 2,560 mm, loading space width: 1,500 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 256 150 2000 2 ⭐New Model⭐ NEW VEHICLE Internal dimensions: 256cm x 150cm Side board height: 30cm Loading platform height: 66cm Total weight: 2000kg Payload: 1715kg Braked single-axle flatbed trailer Overrun brake and handbrake by KNOTT Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tension lock Foldable and removable on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve Ndsdpfxsz Iamus Ah Ssc M+S tires Net/rope hook on the frame 13-pole connector LED outline lights at the front Rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side boards (price reduction) -Black Edition (Powder-coated side boards and rims in black) -Ramps -Steel plate on base plate -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side boards 30cm with tension lock -Flat cover with or without bow -High cover Further accessories available on request! Plus freight to Gera and vehicle registration document €200 net Images are examples and may show optional accessories that incur an additional charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 66,000 mm, loading space width: 24,800 mm, loading space height: 10,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-026 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 MAN TGX 26.480 6x2-4 Air / Air as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235, each with 4 or 6 outriggers Vehicle: Diesel engine MAN D26, 480 hp, Euro 6e Automatic transmission MAN TipMatic 12.26 DD with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Disc brakes, protected, for off-road use Drive 6x2-4 Suspension type Air / Air (LL) 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle 590 l fuel tank capacity, 60 l AdBlue tank capacity Trailing axle steered and liftable Trailer coupling RINGFEDER Type 4040/G150B, ø 40 mm drawbar pin -> Optional ø 50mm also possible Cab GM: the spacious one (wide, long, medium height) Comfort mattress, lower, 110 mm Pull-out refrigerator and drawer Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Ndodpfez Hkdnox Ah Sec Glass sunroof, electric LED lighting MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer GSR equipment (rear view camera, turning assistant, tire pressure monitoring, Alco Lock preparation, etc.) Body: Dump bed: Dimensions 6,600 x 2,480 x 1,000 mm Side walls 1x divided (2 flaps) per side, with side wall release Substructure: Steel construction, KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg pads including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload cut-off system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slewing limit adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic With 4-section and 6-section extension on stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with oil return and internal oil passage -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS -...

Condition: used, Clyde Denseveyor Model 50/12/6 Denseveyor Nedpfezvgu Rjx Ah Sjdc Features the "dome valve" on the feed inlet and product outlet for optimum performance and reliability. Capacity: 1420 litres Inlet: 300 mm dia Conveying Pipeline: 150 mm (6”) NB Vessel No. 5669/2 Year of Manufacture: 2007 Includes dome valves on inlet, outlet and vent line. Overall height of vessel including isolation valve above inlet: 2960 mm. Dense phase pneumatic conveying of powders and granules. 2 machines available. Also, a 70/12/6 Denseveyor.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 814 kg, maximum load weight: 1,886 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 3-way tipper + enclosed leaf guard 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading area height: 66cm Total weight: 2700kg Payload: 1886kg braked tandem trailer overrun brake and parking brake from KNOTT 2x 1350kg axle with brake low chassis fully welded, hot-dip galvanized steel frame aluminum profile side boards with tension lock can be folded down and removed on all sides enclosed leaf guard 60cm made of hot-dip galvanized steel can also be opened and removed on all four sides 15mm thick, non-slip and robust screen-printed wood floor additional steel plate on wood floor automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force reinforced 13" C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber large tipping angle of 51 degrees to the rear hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -Side board height increased to 35cm -Black Edition (powder-coated side boards and rims in black) -integrated loading ramps 2800kg -electric tipping control -charger -remote control -Bluetooth remote control -emergency hand pump in combination with electric control -safety support for maintenance work on the tipped vehicle -foldable crank for rear supports -complete LED lighting Nsdpfx Ajz Egkhjh Sedc -theft protection -net with fine or coarse mesh -H-frame -leaf guard in various heights, also closed -additional side boards 30cm with tension lock -flat cover with or without railing -high cover 160cm or 180cm further accessories on request! plus. freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Nsdsz Eg Awepfx Ah Sedc Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Ndodpfxjz A Ufzs Ah Sec Transportation, installation and commissioning can be offered on request.

Condition: new, Year of construction: 2026, overall weight: 1,900 kg, Big Bag unloading station complete with electric lifting hoist, discharge hopper, structural steel support frame, service platform with access stairs, and perimeter safety guards. Suitable for handling and unloading various bulk materials, including plastic granules, plastic flakes, flour, powders, and similar products. Ndodpfx Asz Hlgkeh Ssc