Used Powder for sale (1,166)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover, front-mounted Equipment: - Steel side walls - 4 lashing eyes - Steel cover Net: €2,100.00 / Gross: €2,499.00 Article number: KEB210201072.01 Technical data: • Brand: TPV Trailers • Model: KT-EB2 • Vehicle type: Covered trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 202 x 107 x 72 cm • External dimensions (L x W x H): 308 x 152 x 132 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,000 kg • Tare weight: 284 kg • Payload: 716 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Side walls made of 1.5 mm steel sheet with aluminum-zinc coating • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9 mm continuous without a joint, non-slip and waterproof • Eccentric locks for the rear door and cover • Galvanized V-drawbar • Plastic mudguards Gkedpfxjzy A Stj Akhsd • Steel cover KTL coated and black powder-coated, 56 mm high with roof rails, splash-proof • Load capacity of the cover: 20 kg open / 75 kg closed • 4 lashing eyes mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • Wheel shock absorber mounted • 100 km/h manufacturer approval • 2 rear supports mounted • Support wheel with clamp mounted • 13-pin plug • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich construction Equipment: - Lashing rails - 30mm insulated wall - 4x lashing eyes Net: €5,357.14 / Gross: €6,375.00 Article number: TKB227301519.01 Technical data: • Brand: Vezeko • Model: TK B • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 305 x 152 x 193 cm • External dimensions (LxWxH): 455 x 205 x 256 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 655 kg • Payload: 2,045 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle Godpoyivbuofx Akhjkd • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, stable, bolted V-drawbar • Very stable aluminum frame • Frame is very torsionally rigid due to its robust construction • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel twist-lock, lockable • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, welded • 4 lashing eyes recessed in the floor inside (750DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic fenders • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery possible throughout Germany - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Features: - 6 lashing eyes - 30mm insulated wall - Lashing rails Net price: €5,705.88 / Gross price: €6,790.00 Article number: TKB227351519.01 Technical data: • Brand: Vezeko • Model: TK B • Vehicle type: Box trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Interior dimensions (LxWxH): 355 x 152 x 193 cm • Exterior dimensions (LxWxH): 515 x 203 x 193 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 695 kg • Payload: 2,005 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, stable, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor panel made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very thick steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich, 25mm • 2-wing rear door with stainless steel swivel locking mechanism, lockable • Continuous interior height: approx. 186cm • Continuous interior width: approx. 152cm • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, welded solid • 6 lashing eyes recessed in the floor (750DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic fenders • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Gjdpfx Akj Aicl Uehskd Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale exceptions apply -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Sandwich Construction Equipment: - V-drawbar - Manual hand pump - 10x lashing points Net: €11,302.52 / Gross: €13,450.00 Article number: FKS227351522.11 Technical data: • Brand: Vezeko • Model: Husky FB K B • Vehicle type: Lowering trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 344 x 157 x 220 cm • External dimensions (LxWxH): 510 x 230 x 270 cm • Loading height of the floor: 44 cm • Permissible total weight: 2,700 kg • Unladen weight: 899 kg • Payload: 1,801 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • very stable steel frame welded • frame completely hot-dip galvanized • many stable cross members, resulting in high point load capacity • body made of very solid steel sheet sandwich, insulated, 50mm thick • top layers made of hot-dip galvanized and additionally powder-coated steel sheet • roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel twist lock, lockable • doors with special sealing profiles, made of hard/soft plastic • rear frame on hot-dip galvanized steel, welded solid Gjdpfezy Da Sox Akhjkd • loading area hydraulically lowerable • mechanical safety lock of the pivot axle during driving • with foldable Inox ramp at the rear • additional longitudinal struts continuously welded • toolbox at the front • 10 lashing points inside the V-loading rail, rubber-coated, tensile force (750DaN/kg) • license plate holder at the rear • ALKO overrun device and parking brake • coupling head ALKO • very stable V-drawbar, REINFORCED • reversing automatic • 13-pin plug • reversing lights • large-sized safety lighting • integrated rear fog light • tail lights at the rear in LED • lighting recessed in the rear frame • support wheel with clamping bracket in the middle _____ Accessories can be retrofitted by our specialist workshop!! - please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery possible throughout the country - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, side door, sandwich panel construction Equipment: - Tie-down rails - 8x tie-down points - 30mm insulated wall Net price: €7,521.01 / Gross price: €8,950.00 Article number: TKC227401820.04 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 865 kg • Payload: 1,835 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor panel made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very thick steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich, 25mm • 2-wing rear door with stainless steel twist-lock closure, lockable • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, with three-bolt security lock, lockable from the inside and outside • Rear frame made of hot-dip galvanized steel, solidly welded • 8 tie-down eyelets embedded in the floor (750DaN/kg) • Slotted-hole tie-down rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reverse assist system • ALKO overrun device and parking brake • Plastic mudguards • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center Gkjdpszy Axtsfx Akhod _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about your specific needs! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealers & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum rims, tilting, badge_hand pump Equipment: - Spare wheel Gsdpfj Aict Hjx Akhskd - Replacement wheel - Sloping rear Net price: €6,718.49 / Gross price: €7,995.00 Article number: PLA227452001.01 Technical data: • Brand: Lorries • Model: PLAXX27-4520 • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 450 x 200 x 0 cm • External dimensions (L x W x H): 628 x 251 x 116 cm • Permissible total weight: 2,700 kg • Unladen weight: 609 kg • Payload: 2,091 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Frame reinforced with solid aluminum, powder-coated • ALU perforated tie-down floor offers high slip resistance and is extremely durable, even under the harshest operating conditions. • Centrally closed loading area made of aluminum diamond plate • Hydraulically tilting loading area • Hand pump for tilting the loading area • A particularly low approach angle of approx. 5.5° • Loading ramps at the rear and additional ramps for loading onto the towing vehicle at the front • Wheel shock absorbers + 100 km/h approval • Storage compartment at the front in the loading area, lockable • Additional drawer • Numerous tie-down points and a highly load-bearing floor offer flexible tie-down options and perfect grip. • Additional tie-down options through side rails • Side panels color: black • Manual winch with winch stand • Walkable fenders • Spare wheel easily accessible, mounted on the side • Reversing aid • KNOTT overrun device and parking brake • Steel cast coupling head with integrated KNOTT high-security lock • Very stable V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-sized LED safety lighting with rubber arm lane-keeping lights • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the taillights • Integrated rear fog light • Various marker lights at the front, side and rear • Aluminum alloy wheels in black • Heavy-duty support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshops for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls Features: -+2° C to +10° C -60mm insulated wall -Insulated floor Net price: €8,663.03 / Gross price: €10,309.00 Article number: HGK113271421.01 Technical data: • Brand: Humbaur • Model: HGK 132716-21 PF 60 Deluxe • Vehicle type: Refrigerated trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 263 x 147 x 197 cm • External dimensions (LxWxH): 413 x 205 x 260 cm • Loading height of the floor: 59 cm • Permissible total weight: 1,300 kg • Unladen weight: 790 kg • Payload: 510 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/65R15 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Sturdy V-shaped drawbar, hot-dip galvanized • Continuous longitudinal members • Insulated 65 mm floor panel with non-slip coating • PurFerro, 60mm - Thermo-sandwich construction • Sandwich panels with a core of foamed polyurethane with a double-sided covering of galvanized and polyester powder-coated steel sheet • Side and front interior wear protection approx. 150 mm high made of aluminum sheet • Rear door with stainless steel hinges • Refrigerated room pressure closure on the rear door • Refrigeration unit mounted on the side wall at the top • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Fully encapsulated unit with "outdoor" housing • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost system for the evaporator • The control panel can be locked and is thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230 Volt interior lighting • 4x swivel telescopic supports • ALKO overrun device and parking brake • Reverse automatic system • Plastic fenders • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Gkodpfx Akjzy A T Rshed We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, Rittal control cabinet air conditioning unit TS 8806.500 Gkjdpexl Td Rofx Akhod Rittal standard control cabinet used air conditioning unit TS 8806.500 Lighting PS 4155100 220x80x60 cm (H x W x D) Powder-coated Rittal control cabinet air conditioning unit SK 3304500 EAN: 4028177251038 control cabinet air conditioning unit You can find more control cabinets in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: new, axle configuration: 3 axles, color: white, Equipment: ABS, - Air suspension EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. EuromixMTP 12 cbm mixer semi-trailer EuromixMTP - Truck-mounted mixer unit EM 12 R - Standard Model: EM 12 R Nominal volume 12 m³ ready-mix concrete Mixing drum in standard design Gkedpfx Aksym Sy Uehod Mixing drum in standard design made of S355 material Mixing spirals in standard design made of S420 MC material Gearbox, manufacturer: ZF P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Oil cooling system integrated Mixing control: mechanical and start/stop electrical Compressed air water system Water connection at the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with a service hatch Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute, and swiveling chute Drum locking mechanism to secure the drum during maintenance work Polyurethane primer Weight approx. 4,725 kg, deviations +/- 5% With emergency stop function according to EU safety technology Fenders made of steel over the rear axles 2x extension troughs made of steel or plastic Water system Water tank 650 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical system Mounted on EuromixMTP 3-axle semi-trailer Vehicle type: EuromixMTP KIS 24 3-axle truck-mounted mixer chassis Axles with short steering ratio (310/340) for ready-mix applications Axle 9t SAF 22.5" disc brake, single tire for air suspension Axle track: 2040 mm (standard dimension) Axle spacing approx. 1400 mm / 1400 mm EBS braking system Tires 385/65 R 22.5 Plastic fenders, 180 degrees, above each axle (for 3 axles) Chassis paint in RAL 9005 deep black KTL coating with zinc phosphating plus powder coating, highest corrosion protection (only if powder coating color is available) Tire pressure control, basic version, connected to the EBS CAN bus system 24-ton telescopic support legs with one-sided operation and Semi-circular design with base plate Axle loads: 24,000 kg (3 x 8,000 kg, technically: 3 x 9,000 kg) Chassis length approx. 8570 mm Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Year of manufacture: 2026 Design year: 2026 Usable material: Concrete GVWR: 44,000 kg Brand of body: ...

Condition: used, 3D SYSTEMS Type: ProJet 660 Pro 3D printer 3D SYSTEMS 3D printer The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows large models to be produced without prior cutting. Furthermore, the large base area increases productivity when printing many small models in a single printing process. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems," also known as ZPrinters, use a layer-by-layer process based on the ColorJet CJP "Binder Jetting" technology, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. Gkjdpfjzdyxrex Akhjd The unconsolidated powder supports the components during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (automated setup and self-monitoring, automated loading of powder, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special requirements for installation: None Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Eos EOSINT Upgrade P385 Eos EOSINT Plastic Laser Sintering System P385 The following items are included with the EOS P385 system: Build chamber Powder container Cooler: Termo TEK Thermochiller 1100 The following upgrade has already been carried out: Software: CDs Eosint P3 Process Software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on August 10, 2007 Laser replacement on May 15, 2008 X-axis drive motor replacement with a used motor on May 4, 2020 Pyrometer replacement on June 30, 2020 350mm x 350mm x 610mm Voltage 3/N/PE/400V, Frequency 50 Hz Connected load 8 kW, Fuse 32 A MAX. Laser power 100 W, Laser class open 4 Laser class closed 1 Weight 850 kg Gkedpfxjzdyx Ee Akhed Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Dimensions: 1,040 w x 1,240 h x 1,050 t Fully assembled incl. 1 set of hinged doors in RAL9002 !Without shelves! Can be manufactured and installed for you on request. Structure powder-coated in the colors RAL 5010 (body) RAL 9002 (doors) Gsdpfx Ajuxnc Nskhekd Available twice

Condition: new, axle configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,440 mm, loading space height: 1,000 mm, suspension: air, tire size: 385/55-22,5, wheelbase: 5,140 mm, color: white, = Additional Options and Accessories = - LED lighting - Air suspension = Remarks = Internal reference number for customer inquiries: 1-497 PAVIC BPA 18E flatbed trailer, offering an excellent price-performance ratio thanks to the use of top-brand components! * Drawbar extendable by 600 mm, continuously adjustable with height adjustment via 2x tension springs * Towing eye ø 40 mm * Tyres: 4x 385/55 R 22.5 premium tyres mounted on steel rims, aluminum rims available at extra cost * Air-suspended axles, 2x 9t; free brand selection by Pavic (SAF/BPW/JOST) * Lifting and lowering system on both axles Loading area (internal): approx. 6,800 mm x 2,440 mm, side wall height approx. 1,000 mm Details: * Side walls made of 25 mm aluminium hollow profiles, foldable with lifting aid * Tailgate foldable and removable, with integrated folding step on the inside * Front wall approx. 1,200 mm high with sheet metal cladding including XL safety certificate!!! * Outer frame with chamfer and lashing holes on the sides and on the chamfer, no lashing rings * Transversely laid plywood floor * Forklift protection, 3 sides (left + right + rear) * Lateral underrun protection on both sides * Toolboxes (optional, at extra charge) * LED lighting * WABCO/Knorr EBS braking system with Roll Stability Program * Chassis coating/painting: KTL with zinc phosphating plus powder, highest corrosion protection (only with powder color availability) or hot-dip galvanized, as desired For further questions, our sales team will be happy to assist you. Gjdpfoziktkjx Akhskd Financing available through our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Axle configuration Tyre size: 385/55-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered Weights Unladen weight: 3,750 kg Payload: 14,250 kg gross vehicle weight: 18,000 kg Functionality Body manufacturer: PAVIC Construction Material Premium Body Condition General condition: very good Technical condition: very good Visual condition: very good

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Gkjdjy Snwnepfx Akhjd Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: good (used), Year of construction: 2005, operating hours: 56 h, machine/vehicle number: 1002, Size 37 x 52 cm, PCS-H control panel, Ryobimatic alcohol dampening system, Technotrans Alpha D cooling and recirculation unit, semi-automatic plate change, all washers, extended delivery, high-pile delivery, Grafix powder spray. Godpfx Akjz Hm Ezehokd

Year of construction: 2016, condition: good (used), Approx. 20 transport carts / storage carts, Fetra – used: Gjdpfx Akoz Dthwjhokd Price per unit ex works: €95.00 (net)! Price for purchasing all 20 units: only €1,500.00 (net) ex works! Manufacturer: Fetra Type: 2102 Year of manufacture: varies, e.g., 2016 / 2017 Dimensions: approx. depth 1m, width approx. 70cm Load capacity: 400kg Weight: approx. 29kg Mostly with clipboard New price: approx. €235.00 Total load capacity (kg): 400 Wheel size (mm): 160 Tires: TPE Loading area height (mm): 233 Usable area length (mm): 1000 Usable area width (mm): 700 Overall length (mm): 1180 Overall width (mm): 705 Overall height (mm): 953 Transport cart made of steel tube welded construction, powder-coated brilliant blue RAL 5007. Platform made of wood composite board, surface with beech decor. 2 swivel and 2 fixed casters, TPE tires, hubs with ball bearings. Parking brake on the swivel casters. Condition: good Available: Location: Hamburg

Condition: new, maximum load weight: 31,400 kg, overall weight: 45,000 kg, axle configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL NEXT DOLL NEXTLowbed tera T2P-S3FS21 – 2-axle lowboy trailer from the rapidly available rapid series by DOLL Fahrzeugbau GmbH, Oppenau – straight from the heart of the Black Forest. Ideal for demanding applications in tough off-road environments, challenging terrain, and for daily use on construction sites. Depending on availability, very fast delivery and operational readiness thanks to DOLL's rapid series production. Individually configurable according to your specific requirements and wishes. Technical Data * Permissible Gross Weight: 45,000 kg * Unladen Weight: approx. 13,600 kg * Payload: approx. 31,400 kg * Running gear: 2 x 12t pendulum axles * Extendable lowbed * Vehicle width: 2,550 mm * Load height (loaded): 300 mm * Wheelbase: 1,360 mm Equipment Features * Detachable gooseneck for significantly easier and faster loading and unloading * Smooth telescoping for efficient handling * High-quality spray galvanization for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized attachments: robust and durable – no rust Your Key Benefits at a Glance * Rapid availability * Robust & reliable – proven technology, ideal even in demanding conditions * Made in Germany – manufactured by DOLL Fahrzeugbau GmbH in Oppenau, a company with over 145 years of experience in premium vehicle engineering Gkodsyytm Repfx Akhjd Smart Technologies Our innovative approach combines quality, performance, and cost-effectiveness at the highest level. The rising demand for our lowbed semi-trailers drives the continuous development of state-of-the-art technologies in series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (headquarters and production site) * The vehicles can be demonstrated either at the factory or at selected reference customers across Germany, together with one of our field sales representatives, depending on customer location.

Condition: new, Year of construction: 2026, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Gjdjxyl Epopfx Akhskd Max. saw blade diameter: 450 mm Display size: 15 inch Working table height: 910 mm Extraction port diameter: 80 + 120 mm Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Cologne S: Smoking Shelter, Waiting Shelter, Bicycle Shelter Whether on company premises, in public spaces or in private areas – the Cologne S smoking shelter with right-hand access is a reliable choice for a practical and versatile shelter with timeless elegance for outdoor use. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The robust frame construction made of hot-dip galvanized and powder-coated square steel tubing guarantees durability and resilience. The steel parts are primed and coated (protection class: C4 medium). High-quality wall elements made of single-pane safety glass provide protection from wind and rain. The roof is designed to withstand even very high wind loads and snow loads (wind load zone I-III/snow load 1.9 kN/m²) with ease. Whether as a smoking shelter or a waiting shelter – thanks to its aesthetic design, this shelter blends seamlessly into any outdoor area. The Cologne S smoking cabin is the perfect solution for a robust and modern roofing system. Reliable outdoor shelter with timeless elegance Access on the right-hand side Flat roof with internal rainwater gutter & spout for drainage Galvanized & powder-coated steel structure Rear and side walls made of single-pane safety glass Manufacturer: Resorti Model: Cologne S Material, basic structure: hot-dip galvanized and coated steel Material, roof: galvanized trapezoidal sheet, underside coated Wall elements: single-pane safety glass (ESG) Width: approx. 2165 mm Height: approx. 2500 mm Gkedoynkntjpfx Akhjd Depth: approx. 2165 mm Area: approx. 4.30 m² Weight: approx. 520 kg Access: right Floor mounting: for screwing onto a base plate Delivery without bench Manufacturer's price for smoking shelter: €4,080 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Gemac Jungheinrich Meta Pallet Rack Beam Type S The pallet rack beam Type S with a span of 2700 mm offers space for three Euro pallets per beam pair. Used as a replacement for damaged rack beams, e.g. after a rack inspection, and for expanding existing racking systems. The beams can be individually adjusted in height in a 50 mm grid. Manufacturer: Gemac, Jungheinrich / Meta Model / Type: S Beam length: 2700 mm Gkedpfxjw N Nbno Akhed Load capacity per beam pair: max. 3000 kg Box profile: 140 x 50 mm H x D Overall length: 2780 mm Material: cold-rolled steel Profile design: rectangular profile Mounting: hook tabs on each side of the beam for hanging, secured with a locking pin Surface: powder-coated Color: Rotorange RAL 2001 Scope of delivery: 1 x pallet rack beam 2700 x 140 x 50 mm orange You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Gkedpshkz Hmjfx Akhjd Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: good (used), Allfill SHA15 Auger filler Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph Gsdpfx Akevhcx Hjhekd

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Krone SDP 27 platform trailer (example images) * Fifth wheel height 1,150 mm * Multilock outer frame, universal load securing option every 100 mm Gjdpovw Hmasfx Akhekd * Pallet box 24 Euro pallets * 10 pairs of stake pockets in the outer frame * 10 stake pockets in the middle of the floor * 12 insert stakes 1,950 mm * 4 pairs of ship fastening straps * Container locks for 1x40, 2x20, 1x20 in the middle up to 25 tons * Two mechanical support winches * Krone axles with air suspension and disc brakes * Wheelbase 1,310 mm * Air suspension with lifting and lowering device, including automatic ride height reset * Fully automatic electronic lifting axle control for 1 axle, depending on load * Axle cap KM counter * 6 tires 385/65 R 22.5 * Spare wheel holder in basket design * Wabco brake system * LED lighting * Multifunctional rear lights * 1 reversing light * Plastic toolbox * 2 sets of over-width signs including marker light * Stanchion storage on the left and right sides * 30 mm thick, waterproof plate floor * Steel bulkhead 2,000 mm high * Steel parts blasted, KTL primed and powder coated * Chassis including outer frame RAL 9005 jet black * Axles including wheel hubs RAL 9005 jet black We are happy to provide you with further information

Condition: used, This listing is for the Big Neat. F3-XIT Safety Cabinet The unit is in full working condition and is ready for immediate use The Bigneat F3‑XIT is a benchtop powder weighing safety cabinet manufactured by Bigneat, tailored to protect operators from exposure to dust and particulates while handling and weighing fine powders. It features a compact footprint and excellent visibility through its acrylic enclosure, ideal for precision work. MedicalExpo Gsdpfx Ajxhff Sokhekd DirectIndustry Key Features: Compact design with great all-around visibility, available in two access styles: F3‑XIT‑D: Hinged access flap. F3‑XIT‑S: Corner “tear drop” access. Recirculating HEPA filtration, including a pre-filter and HEPA filter that removes particles down to 0.3 µm with 99.997% efficiency, returning clean air back into the lab. Balanced airflow: Pre-set to a capture velocity of approximately 0.35 m/s, proven to offer both effective containment and stable weighing condition

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 2,140 mm, total width: 1,040 mm, load capacity per storage section: 900 kg, overall weight: 555 kg, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. with 5 vertical pull-outs each 180 mm wide and a max. load of 900 kg per pull-out. Dimensions: W= 1040mm, D=1050mm, H=2140mm two-tone powder-coated Housing: black-grey, textured (RAL 7021) Pull-outs : black-grey, textured (RAL 7021) Product code: 94032080 Gkedpfour Iz Dsx Akhsd Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 555 kg Completely assembled as a set incl. - 50 storage trays - Sample kit with boxes and dividers