Used Powered Conveyor for sale (46,774)

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Bwedpfx Ajtw Sm Neiwew Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: ready for operation (used), * Brand: Wagner * Model: electro magnetic conveyor belt * On stock: 1 piece * 1x Length frame: A-A = 2600 mm, Beltwidth: 1200 mm * Driving: 7 kW gearbox Bjdpfxoywndle Aiwoww * Dim. Block : 1700 x 1150 x 600mm * Incl.: rectifier.

Condition: used, SincoTec Type: Exciting Mot Bwodpezii Awefx Aiwow Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2026, condition: used, Year of manufacture: 2026 New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Bwsdpfxsznr Dbo Aiwsw Communication Interface: RS232/RS485

Condition: used, Sturdy Harbs conveyor belt, type TB150/5500, with side stop and mechanical pressure mechanism. Bjdpfx Aozrx Nrsiwjww Technical data: - Width: 150 mm - Length: 5,500 mm

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Bodpfxj Aarfge Aiwoww Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: used, Year of construction: 2009, Sartorius MDP+ metal detector on conveyor, built in 2009 This Sartorius MDP+ metal detector is mounted on a mobile stainless steel conveyor with a 350 mm wide modular belt. The aperture is 400 × 165 mm (w × h), the belt is 2,060 mm long. The detector is operated from the keypad panel on the detector head; the conveyor has its own control box. Located in Emmeloord, the Netherlands. Available on request, price on request. More photos and full specifications: / Type: Metal detector with conveyor Aperture: 400 × 165 mm (w × h) Belt width: 350 mm Belt length: 2,060 mm Bedpoz Nc U Rjfx Aiwsww

Condition: used, Prints labels and applies them straight away This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height. According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Print and apply labeller Print method: Thermal transfer (ribbon) Application: Blow applicator (air) Bodpfx Aijz Ndccsweww Construction: On column with conveyor, height adjustable

Year of construction: 2012, condition: used, Tipper with discharge belt and cross conveyor for the food processing industry This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away. Bjdpfxjz Ndhre Aiweww The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tipper with discharge belt and cross conveyor Belts: Blue food-safe discharge belt plus cross belt Safety: Mesh safety guard with emergency stop Controls: Control box with up/down buttons (height adjustment) Construction: Stainless steel

Condition: used, Inclined conveyor for moving product within a food processing line This conveyor has a stainless steel frame mounted on castors, making it easy to reposition on the work floor. The belt has raised, wave-shaped side skirts on both sides, which keep loose or irregular products on the belt while it runs at an incline. The drive and controls are housed in a compact box fitted to the side of the frame. The open frame design allows for straightforward cleaning, suiting the conveyor for use in a food processing environment. Located in Emmeloord, the Netherlands. Immediately available, price on request. Bwsdpfsz Ndpcex Aiwow More photos and full specifications: / Type: Incline conveyor Belt: With raised wave-shaped side skirts and cleats Controls: Compact control box on the frame Construction: Stainless steel frame on castors, open design

Condition: not inspected (used), Item: Complete hydraulic unit with electric motor, power: 1.5 kW, (5 units) Bwsdpfxoz R N Sbs Aiwow

Condition: not inspected (used), Item: Complete hydraulic unit with electric motor, power: 1.5 kW (4 units) Bwjdpfx Aijz R N Uvswjw

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm Bedpfez I Tbrsx Aiweww - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm adjustable speed Bwjdpfx Aisz Nd Hvjwsw mobile as new

Condition: used, mileage: 544,596 km, power: 345 kW (469.07 HP), first registration: 03/2021, fuel type: gas, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, GW26870831 Fifth wheel coupling (SAF), aerodynamic package, roof spoiler, differential lock on rear axle, electric windows, air conditioning, Bwods Aa E Dvepfx Aiwow additional fuel tank, refrigerator, alloy wheels, multifunction steering wheel, radio, sleeper cab(s), heated seats, sun visor.

Condition: ready for operation (used), power: 5.5 kW (7.48 HP), color: green, - Length: 15 m - Height: 1,27 m - Shaker channel: 650 x 200 mm Bjdpfx Ais Aa A Ufewsww - Motor: 5,5 KW

Condition: used, Hydraulik Station with 700 liter tank 1 x Rexroth Pump mounted on 15 KW Motor / 1450 rpm. 2 x Rexroth Pump mounted on 22 KW Motor / 1465 rpm. Bsdpfx Aie Aa Dcdjwsww Tank dimensions: l x w x h = 1,50 x 0,94 x 0,5 m

Year of construction: 2003, condition: used, machine/vehicle number: TUNNEL 40/27, Manufacturer: SFERE EMBALLAGE S.A. Year of manufacture: 2003 Electrical current: 10 A CE marking on manufacturer's plate Heat shrink wrapping Integrated through-feed conveyor Heating chamber with top cover Front control panel Integrated digital display Rotary adjustment control Control buttons on the front Emergency stop on the front panel Lateral switch-disconnector Mobile metal frame on casters Adjustable stabilizing feet Electrical hazard warning Used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel – Through-feed conveyor and digital control General description The used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel is a professional piece of equipment designed for heat shrink wrapping operations. Manufactured in 2003 by SFERE EMBALLAGE S.A., a French manufacturer, it allows products that have been previously wrapped in suitable film to undergo a heating phase as they pass through the tunnel. Bsdpsz Urq Hsfx Aiweww Designed to be integrated into a professional packaging environment, this heat shrink tunnel features a through-feed conveyor, a front control panel, and a mobile frame. Its manufacturer's identification and visible equipment allow for a clear understanding of its configuration without presuming its current performance. Why this model stands out The SFERE TUNNEL 40/27 combines product conveyance with a heat shrink operation. This configuration facilitates the organization of a packaging station where items, already wrapped in film, pass through the heating zone before subsequent handling or shipping steps. Its control panel with a digital display allows for the monitoring of an operating parameter. A rotary control and several control elements are also visible on the front. The frame mounted on casters, complemented by stabilizing feet, is a practical asset for positioning the machine in a workshop. Key advantages Through-feed conveyor to accompany the passage of products through the tunnel Heat shrink principle suitable for heat shrink wrapping operations Digital display integrated into the front control panel Rotary control accessible to the operator Emergency stop present on the control panel Lateral switch-disconnector visible on the machine Frame on casters facilitating movement Stabilizing feet to immobilize the equipment at the workstation Manufacturer's plate for identifying the model and its year of manufacture

Condition: good (used), Year of construction: 2015, Telescopic roller conveyor / roller telescope, Budde. For loading and unloading trucks, etc., e.g., with tires – used: Price ex works: only €5,950 (net), including loading! Manufacturer: Budde Type: TRM03-5 Year of manufacture: 2015 Machine number: 04764 Bodpfx Aiez Tdy Djweww Extended length: 14m Retracted length: 4.94m Roller width: 84cm Width: 104cm Functions perfectly The roller conveyor is not powered – it operates using gravity Normally stands on feet The extension is powered or motorized Condition: good Available: immediately Location: D-66620 Nonnweiler-Otzenhausen A video showing the device in operation is available and can be sent upon request, e.g., via WhatsApp.

Condition: used, Year of construction: 2010, Technical details: weight of the machine approx.: 1400 kg dimension machine xH: G= 6,6 x 0,9 x 3,8 m total power requirement: 0,75 kW Made of sturdy sheet steel construction. Bedpou Nun Hofx Aiweww This is a scraper belt conveyor. Drop-in width: F1= 480mm; Drop-in length: 750mm Ejection: height H = 3200mm Infeed (underfeed to the machine): height = 300mm + superstructure B= 370mm = 670mm and width F= 580mm and length A= 2230mm The chip conveyor is to be positioned stantionary. *

Condition: used, Technical details: band width: 135 mm conveying height: 1020 control voltage: 380 V weight of the machine approx.: 165 kg dimension machine xH: 3,3 x 0,5 x 1,5 m Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20mm -Discharge length (D) 200mm -Discharge height above floor (C) 1020mm -Discharge width 200mm -Insertion length/underfeed length (A) approx. 2000mm Bwjdpsu Nuquefx Aiwjw -Insertion height (B) 180mm Operation via manual switch Rotating scraper brushes at the discharge and on the left/right side of the infeed beam *

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas Bwodpsu Nxatofx Aiwow 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: used, This listing is for a GE Healthcare EPS 601 Power Supply. The unit is in full working condition and is ready for immediate release. The GE Healthcare EPS 601 Power Supply is a reliable and high-precision power source tailored for electrophoresis applications. With advanced safety features and programmability, it is ideal for laboratories performing a wide range of electrophoresis techniques. Key Features: Automatic Cross-Over at Preset Limits: Automatically adjusts the controlling parameter (voltage, current, or power) based on programmed limits and conductivity changes during the run. Supports Multiple Electrophoresis Units: Connects up to two electrophoresis units simultaneously, enabling efficient operation with the same programmed method. Programmable Memory: Saves up to three user-defined programs, facilitating repeatable and consistent workflows. High Precision and Safety: Delivers accurate power regulation with integrated safety features for optimal performance and protection of samples and equipment. Versatile Applications: Compatible with various electrophoresis techniques, including: SDS-PAGE Native PAGE Agarose electrophoresis Electroblotting DNA pulsed field electrophoresis DNA fragment separation DNA submarine electrophoresis Troubleshooting and Maintenance: Error Codes: Displays specific error codes for easy troubleshooting of system issues. HALT Mode: Automatically switches the program to HALT mode and cuts off the output in response to errors, ensuring safety. FAIL Mode: Engages FAIL mode for critical errors, turning off the output to prevent damage or unsafe operation. Bedsxxz Ttepfx Aiwjww Specifications: Maximum Voltage: 600 V Maximum Current: 400 mA

Year of construction: 2005, condition: used, Roller conveyor length: 6000 mm Roller conveyor width: 300 mm Stop flap with scale: Yes Bjdpfxexbnxns Aiwoww

Condition: new, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Exhibition machine- New: GLUJET GJ725 This offer includes an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Joiner milling unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Glu Jet GJ725 NC PUR PRO adhesive application system - Press unit 1912-3 pneumatic - Trimming unit 1918 pneumatic 60 mm - Multifunction milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, R 2, left-hand rotation - Diamond cutter Ø 56/60 mm, R 2, right-hand rotation - Corner copying unit FF301 MOT1 - Scraping blade unit ZK301 MOT4 incl. high-gloss package - Tungsten carbide inserts for scraping blade carrier - Chip collection box for scraping blade unit - Buffing unit 1940 - Spray device TR301 for the infeed and outfeed area - Motorized adjustment of the pressure beam - iTronic adaptive pressure and adhesive quantity control - Infeed fence long 1,252 mm - Motorized adjustment of the infeed fence - Press unit DW301 with motorized NC axis - Extraction hoods for trimming unit 1918 - Shelving program - Surface scraping blade FK701 - Spray device GM301 after the press unit - new exhibition machine - Bodpfx Aieu R Sy Aoweww