Used Pre Crusher for sale (45,640)

Condition: used, Used Netzsch model PMD Pharma 50 stainless steel pre-mix disperser approximately 50 litre working capacity. Jacketed chamber with mechanical seal. Has welded conical bottom and bolted dished top heads. Unit has top entry stainless steel agitator driven by a 15kw 3/50 2900rpm motor. Includes hydraulic powerpack driven by a 1.1kw 3/50 1415rpm motor for agitator raise and lower. Has bottom entry stainless steel scraped surface agitator driven by a 1.35kw 3/50 142-1420rpm motor. Pjdexyxnwopfx Adijgw

Condition: used, Year of construction: 2007, operating hours: 21,500 h, Serial number: 212/K00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21918 Specifications: Pgedpexz N Dxefx Adisw Model year: 2007 Hours: approx. 21,500 3 decks Radio control 3-axle Top section replaced Conveyor belts inspected/overhauled Ready for delivery Description:Jonsson & Sønner cone crusher from 2007.The owner purchased the unit in 2022 and has invested a fair amount in it. The top section has been replaced.He has not used it in production himself, but it has been started and tested. It is said to be in good condition.Can be delivered on short notice. Hours: 21500 Own weight: 21000 Model: RC 3800 konknuser

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). Psdpfxsxv Dv Es Adisgw - Water/wastewater treatment in situations needing durable, robust probe

Condition: ready for operation (used), Cone Crusher Metso / Lokomo Type: G3812 Podpfsu Tlruex Adisgw Mobile type lokotrack 1200 Weight appr. 39 Ton.

Condition: good (used), mileage: 561,385 km, power: 265 kW (360.30 HP), fuel type: diesel, color: red, axle configuration: 6x4, fuel: diesel, wheelbase: 4,200 mm, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, loading space volume: 15 m³, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, differential lock, = Additional options and accessories = - Electric windows - Speed limiter - Air-suspended seats - Sleeper cab - Sun visor - Toolbox - PTO (Power Take-Off) = Remarks = Pgedpfsxyubtjx Adijw MAN TGS 33.360, 6x4, vacuum and high-pressure truck, tipper tank, manual gearbox, steel suspension, Wittig pump RFW 200, high pressure pump Pratisolli K32, Belgian registration, good working condition = Further information = General information Year of manufacture: 2008 Transmission Gearbox: ZF, 16-speed, manual transmission Axle configuration Suspension: Leaf suspension Front axle: Steering; left tyre tread: 50%; right tyre tread: 50% Rear axle 1: Twin tires; differential lock; left inner tyre tread: 30%; left outer tyre tread: 30%; right inner tyre tread: 30%; right outer tyre tread: 30%; reduction: external planetary axles Rear axle 2: Twin tires; differential lock; left inner tyre tread: 40%; left outer tyre tread: 40%; right inner tyre tread: 40%; right outer tyre tread: 40%; reduction: external planetary axles Functionality Bodywork brand: Wicom Condition Technical condition: good Visual condition: good Further information Please contact Gerrit Haverhoek for further information.

Condition: good (used), Year of construction: 2020, operating hours: 4,121 h, functionality: fully functional, Equipment: Electric pre-heating for lubricating oil, radio remote control Side discharge conveyor: 650 x 6,000 mm (W x L) Main discharge conveyor: 1,200 x 10,000 mm (W x L) Crawler chassis: 3,800 x 400 mm (L x W) Dimensions in working position with folded-out side conveyor: 17,300 x 8,300 x 5,200 mm (L x W x H) Dimensions in transport position: 18,900 x 3,000 x 3,500 mm (L x W x H) Weight: 42,500 kg Crusher: Belt feeder with pre-screen Screen dimensions, upper deck: 1,220 x 1,830 mm (W x L) Screen dimensions, lower deck: 1,120 x 1,530 mm (W x L) Pgodexxk Exopfx Adisw Crusher feed hopper: with bypass Generator with hydraulic drive: 400 V, 10 kVA Blower unit: for dust sealing of the cone crusher Engine manufacturer / model / output / emission stage: Cat / C9.3B / 310 kW at 1,800 rpm / Tier 4 Final

Condition: good (used), Year of construction: 2019, operating hours: 5,380 h, Drivetrain Make of engine: DC13 71A Weights Empty weight: 47.280 kg Functional Dimensions of cargo space: 17340 x 3000 x 3600 cm Podpfx Ajxpnyzsdisgw CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: K0180224 Other information Delivery terms: EXW Production country: DE Additional information Please contact Jeroen Rijk, Dennis van Loon or Antoon Schroder for more information

Condition: used, Year of construction: 1987, Please contact ATS Norway for more information Please provide reference number upon request: 20513 Specifications: - 1987 model - Number of hours unknown - Gearbox in need of overhaul - Feed box - Conveyor belt - Flywheel - Jaws can be included for an additional charge - Starts and runs - Faults and defects occur - Ready for delivery Description: We have a 1987 Haahjem ctc 110 Jaw crusher for sale. Gearbox in need of overhaul. Crushing jaws can also be included for an additional charge. Services are performed by the owner on an ongoing basis. Psdpjwphlmjfx Adisgw Faults and defects occur and some additional costs must be expected. Ready for delivery

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Pgsdjxyff Njpfx Adijw Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: ready for operation (used), Jaw Crusher Kleemann Pgjdpfou S Tqvsx Adiow Brand: Kleemann Type: SSTR 1250 Feed Opening: 1250 x 950 mm Incl.: E-motor Weight appr. 38 Tons

Condition: used, functionality: fully functional, Ferwood Code: RU0011405 - Condition: Used - Functionality: Fully functional - Compatible Machine: HOMAG KAL-KFL-KAR EDGEBANDING MACHINE - BIESSE STREAM - SCM STEFANI - HOLZHER - KDT - IMA - If interested we offer an overhaul service, contact us. Pjdpfx Adev I Ah Usiogw

Condition: new, Year of construction: 2025, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: Pjdpfx Aoulwg Nsdiegw 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Pjdpfet Uc Iqox Adiogw Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz

Condition: used, Year of construction: 2004, Serial number: 3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20508 Specifications: - 2004 model - C145 jaw crusher - Overhauled - Line drilled - All bearings replaced Podpfx Aewph E Hodijgw - Pendulum is assembled - New thrust bearings - New cylinder for opening jaw - New press sleeves - New starter cabinet - Crushing plates can be included if desired for an additional price - Ready to deliver Description: We have a 2004 Metso c145 Crusher (overhauled) for sale. Everything has been replaced and there are new bushings, bearings and new control cabinet and cylinders. Everything works as it should but needs to be assembled. Ready to deliver

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting Pjdpfewb Ha Tox Adisgw – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: ready for operation (used), Cone Crusher Svedala Brand: Svedala Type: 36/H/MC Incl.: basic chasis and oil unit Pgodpfxopn I H To Adiew

Condition: used, Year of construction: 2005, operating hours: 11,447 h, 2005 | Kleemann MOBICONE MCO 11 D3 | Used Crusher | 11447 hours 📍Location: France, Brigueuil 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 198000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 78 inspection points 70 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the machine, the wear of the bodywork and paint corresponds to its age but remains in very good condition. The crusher could not be tested due to a hydraulic pump issue. The track assemblies need to be retained. The condition of the conveyors is in perfect condition. The walls of the mixing and feeding areas need to be planned for replacement. The general condition of the machine is good. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38913 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Pgsdpfjxuwxkox Adiew We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2019, operating hours: 1,850 h, condition: used, Powerscreen Trakpactor 320 Horizontal Impact Crusher Year of manufacture: 2019 Operating hours: 1850 Weight: 40,500 kg Bypass conveyor (option – included) • Width: 650 mm (2’2’’) • Discharge height: 2.72 m (8’11’’) Overband magnet (option – included) Feed hopper • Hopper length: 4.04 m (13’3’’) • Hopper width: 2.1 m (6’11’’) • Hopper capacity: 6.25 m³ (8.2 cu yd) Feeder • Vibrating feeder with pre-screen (grizzly feeder) • Length: 4.04 m (13’3’’) • Width: 1.08 m (3’6’’) Crusher • Feed opening: 1130 mm x 800 mm (44.5” x 31.5”) • Minimum CSS (Closed Side Setting): 75 mm (2.9”) – upper impact plate • Maximum OSS (Open Side Setting): 150 mm (6”) – upper impact plate Crawler undercarriage • Width: 400 mm (1’7’’) Pgsdowwi T Ispfx Adijw

Condition: ready for operation (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, number of blades: 5, overall weight: 21,000 kg, power: 279.49 kW (380.00 HP), fuel type: diesel, color: red, motor manufacturer: CAT, motor model: CAT C9.3, Field of application: For use with aluminum, white goods, light sheet metal scrap, aluminum rims, various types of waste and wood Shafts with 7/7 discs with 5 knives per disc Podpfsxfiybex Adisgw Robust hook lift frame Axle with drawbar (solid rubber wheels) Reinforced rubber conveyor belt Water spray system Radio remote control Optionally: Permanent overband magnet

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 12/2027, For all light / dark rest broths etc. "The universal crusher" stainless steel Performance hrs / 1500 kg dry With pouring ring Screen 3/5/8 and 12 mm (included) Connection 400V, 11 kW, 32A-CEE connector Dimensions: 720 x 810 x 1610mm, WxDxH Podpfjdg Hn Uex Adiogw Ejection height 495

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 900 h, functionality: fully functional, HAAS Tyron 2000 XL 2.0 Pgodpfx Aom H T R Esdisw Year of manufacture: 2023 Approx. 900 operating hours - Crawler undercarriage - Scania diesel engine 294kW / 400HP – emission stage V - Fine tool configuration 9/9/4 - Neodymium overband magnet, hydraulically height-adjustable - Generous tilting hopper - AWG approval under §52 The machine is suitable for waste wood, green waste, roots, and various types of waste...

Condition: ready for operation (used), Cone Crusher Krupp Brand: Krupp *Type: 90-8 Year of manufacture: 2000 Incl.: E-motor, hydraulic system, electric control and new wear parts. Pederbdlhspfx Adiogw

Condition: ready for operation (used), Kleemann Percussion Mill Brand: Kleemann. Type: SHB 14-1000 Feed Opening: 1430 x 1050mm Dim. Rotor: 1400 x 1000mm Pjdpfxsi A Avte Adisgw Incl.: E-Motor 160 kW

Condition: ready for operation (used), Roller Crusher Krupp Brand: Krupp Dim. rollers: width 250 mm, Ø 650 mm. Podpfoxarvuex Adijgw Power : two pieces e-motors of 7,5 kW Including 2 pieces spare rollers.

Condition: ready for operation (used), Jaw Crusher Böhringer Feed Opening: 800 x 200mm Podjw D Nrdepfx Adiegw Driving: E-Motor 30 kW