Used Short Cycle Press Line for sale (25,287)

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" Nododun Nijpfx Ahzjlb V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: good (used), Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Nledpoy I Sncefx Ahzeb Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: Nlsdpfx Asy Avl Ijhzob * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 46,500 h, functionality: fully functional, machine/vehicle number: 11623, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and EFD Micromat strip lubrication. The line includes a sound-insulating safety cabin, finished-parts output conveyor, PBK PE 250/200 USG coiling machine (2004), and HURAS HPK 1500-220 horizontal decoiler (2015). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 11623 Year of Manufacture 2001 Nodpfoy I A Rzjx Ahzelb Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 46,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 74 kVA Main motor power 22 kW (AC inverter-driven) Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2015) Including PBK PE 250 200 USG Coiling machine (2004) Includign EFD Micromat Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: used, Hydraulic press line for deep drawing and forming processes, featuring multiple presses and automated parts handling. Manufacturer: Fritz Müller / Schuler Machine type: Hydraulic press line / transfer press Number of presses: 6 Press 1 Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 Press force: 12,000 kN Press 2 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 3 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Nljdpfxey Ndz Re Ahzob Press 4 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 5 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 6 Type: ZE 800 – 40.3.1 Year of manufacture: 1993 Press force: 8,000 kN Max. workpiece size: 3,500 x 2,200 mm Max. tool weight: 32,000 kg Material thickness: 0.5 – 2.5 mm Max. drawing depth: 430 mm Documentation: No digital data available Drawings: Partially available as ink drawings, can be viewed onsite Packing lists: No packing lists with individual weights available Type plates: Not fully available, exact model designations only partially present Location: Radeberg

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 Njdsr Iil Eopfx Ahzolb DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: Njdpfxjx Ezuys Ahzslb - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner - Drying oven - Production capacity: up to 600 ends per minute

Condition: like new (used), Year of construction: 2022, operating hours: 91 h, functionality: fully functional, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 400 g/m², paper width (min.): 100 mm, paper width (max.): 330 mm, paper height (min.): 148 mm, paper height (max.): 660 mm, number of feeding trays: 5, total length: 4,642 mm, total width: 831 mm, total height: 1,212 mm, space requirement length: 6,500 mm, space requirement width: 2,500 mm, space requirement height: 2,000 mm, counter reading (black): 1,411, counter reading (color): 84,400, year of last overhaul: 2026, type of input current: AC, input current: 16 A, input voltage: 230 V, Equipment: auto duplex, brochure finisher, raster image processor, Xerox Versant 280 Press – Full Bleed Trimming, Only 85,811 Clicks For sale is a well-maintained Xerox Versant 280 Press complete with full-bleed booklet production line from a professional environment with low usage (only 85,811 total clicks). Machine is fully operational and production-ready (last inspection: 23.04.2026). Price (excluding VAT, negotiable): Nodpfx Aoy Nfqgshzjlb CHF 25,000 / EUR 27,300 – EXW Canton of Zurich __ EUR value indicative based on daily exchange rate. Delivery and installation can be arranged upon request via specialized transport company. Machine Details: Xerox Versant 280 Press - Year of manufacture: 2022, initial operation: September 2022 - Printing speed up to 80 pages per minute (52–220 gsm) - Automatic duplex printing up to 350 gsm - Resolution: 2400 × 2400 dpi (Ultra-HD) - Paper range: 52–400 gsm, format up to 330 × 488 mm Configuration: - Xerox Print Server v2.1 (external Fiery 2.1, incl. workstation with license) - High-capacity tray for oversized formats OHCF (A-CF03, 2,000 sheets) - Production Ready Booklet Maker Finisher (A-FN13) - SquareFold Trimmer (spine forming, face trimming) - Two-Side Trimmer with creasing function (for full-bleed booklets) - Interface module with decurling unit Condition and Maintenance: - Only 85,811 total clicks (84,400 color, 1,411 black & white) - Approx. 6–8% of typical lifespan utilized - Actual print time per counter report: 91 hours - 4 new drum units included (current drums at 15% life remaining, new ones have already been purchased and will be supplied upon handover) ### Last service inspection on 23.04.2026 Service contract (Switzerland); transfer to buyer upon agreement __ Upgrade Potential: The Versant 280 is CMYK+ capable – retrofitting with the Xerox Vivid Kit (Gold, Silver, White, Clear) or Fluorescent Kit is possible via Xerox. Inspection: Viewing and test printing in the Canton of Zurich can be arranged by appointment. Please inquire via email for a call-back.

Condition: used, machine/vehicle number: 008215, Max working length: 2300 mm Max working width: 1300 mm Pressure Exerted: 15 Kg/cm2 No of Pressing cylinders: 4 Njdpsx A Tihofx Ahzelb No of Daylights: 10

Condition: used, Year of construction: 1984, Pressure total: 600 ton Nedpfx Ahsuqdizezslb Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton Standard configuration Cushion in table pneumatic Extended machine accessories die loading charts for tool changeABB Handling robots for loading and unloading presses

Condition: excellent (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 3294, type of input current: three-phase, power: 90 kW (122.37 HP), input voltage: 400 V, We are selling press line from Nova pellet, 2019 production and 2020 first year of production start. -Pellet press N-MIDI 90 KW 14.000 hrs(very good and daily maintaince, 2026 new rollers and die)-2019 year -Transporting vertical elevator ca 10m height-2019 year -Cooling tower N-CO700-2019 year -Control cabinet-NEW UNUSED For aditional price we are selling heavy duty hammermill Miller M16(37kW electric engine)-NEW UNUSED-25.000€ netto We are selling only items above(without cyklon, filters etc.)! Nledpfx Aowahhcohzsb Line is in very good condition and had very good daily maintaince. For further informations, please write or call on our contact.

Year of construction: 1990, condition: good (used), Short/ Nest Line Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product Nljdon Arzkopfx Ahzob 12. Comand pult 13. El Cabinet 14. Automatic packing Unit

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit Njdeh Dxgaspfx Ahzolb

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Nljdpev Hqnasfx Ahzob Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 2006, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Nledpfeyw Aicjx Ahzob Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 155mm Glue: Danafix 446 Nedjw Anc Eepfx Ahzjlb Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Glue: Danafix 446 Nedpfx Asvw Eh Nohzslb Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Njdpfxepvlf Se Ahzolb Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor Nlsdpfedhzf Iex Ahzob • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Nlsdpfx Ahjx Ag Azszob Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Nljdpjx Ag Epjfx Ahzeb Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-ax

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Nljdpjx S Rbvefx Ahzjb

Condition: new, Brand new tandem press line ISGEC from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Nledpfx Aoihfwtohzjb

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW Nlsdsxf Hm Sspfx Ahzob

Year of construction: 2023, condition: like new (used), functionality: fully functional, Complete briquetting press line for the production of charcoal, mixing, and briquetting of various sludges! The plant includes a DOUBLE CRUSHING PRESS MOLDING MACHINE, mixer (paddle mixer), CIRCULAR COAL SIZING BLADE SYSTEM Q180*25MM, belt conveyor (6000x5500 mm, 8mm rubber belt, speed adjustment), 2x Q HELICAL CARRIER, conveyor belt 500x4000 mm, coal crusher group system (A GROUP SYSTEM), and coal drying oven. The complete electrical system for each unit is present and functions flawlessly. The plant is in like-new condition and ready for immediate operation. Njdpfxew Nh Adj Ahzslb