Used Printing for sale (5,948)

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Tedpfx Alew H Naao Uob Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Tedpfx Aljhg Rcxo Uob Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Todpfxoya Hvqs Al Usb Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: excellent (used), Printing International Cristal 90X2 Tedpfxev Iyh Se Al Uob

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Furthermore, a variety of materials is available for the machine. Tsdpoxwpvgjfx Al Uob

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Tjdpfxoxwnw Aj Al Uob Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER 4. 2 SET OF RACK DRYIERS ALL ARE NEW , OUT OF THEIR BOXES.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Tsdpfx Alovy Aips Uob Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section Tjdpfxjwqcrqj Al Uob - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Todpfxjwhvq Io Al Uob Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Todpfozvb I Esx Al Uob Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A Todpfxszx E N Ss Al Ujb SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Todpfxszx E Axj Al Ujb Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: used, RSI 715 Base Printstation Pro600 Twin Head MCS Falcon (HP Inkjet) Print Heads, Air Table with Conveyor, Stream Feeder V-1400ij Inkjet Hopper A3 - A5, 2m x 1m Footprint. S/No. A-22929. Country of Origin: U.S.A. Highest bid is subject to vendors approval. Todpfezwnw Njx Al Usb Please Note: This lot is located in Birmingham, UK. A charge of £25 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2013, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 377237, Size 74 x 106 cm, CX package for board up to 1.2 mm, Wallscreen, Divetronic, Ergotronic, Qualitronic color control, SIS infeed system, Optical sheet control, FAPC plate change, Varidamp dampening, Blanket wash, Roller wash, Impression cylinder wash, Technotrans High Tech combi Beta.C, Beta F filtering unit, Chamber coater Harris&Bruno for conventional coating, Vary IR/TL dryer in delivery, ALV 3 delivery, Grafix Megatronic powder spray, Logistic system, Machine is elevated by 675mm. Todpfjzxf H Rsx Al Ujb

Condition: like new (used), Year of construction: 2022, The Jeti Tauro H3300 is Agfa's 3.3 m-wide hybrid UV inkjet printer, designed for high-volume production on both rigid and flexible media. Agfa currently lists it with speeds of up to 1,280 m²/h, a maximum print width of 330 cm, and configurable/upgradeable automation, speed and colors Manufacturing Year: 2022 Colour configuration: CMYK Lc Lm + white Roll to roll: included Mileage: lamp usage 600 hours, the printer has very low mileage, like show room printer!!!!! Service: Under Agfa service contract Under production, demo possible Location: Western Europe Print head status: excellent Availability: September 2026 For further technical details please refer to enclosed brochure Positioning 3.3 m-wide hybrid UV LED inkjet printer Designed for both rigid and flexible substrates 6-color configuration Standard productivity: up to 450 m²/h Can be upgraded to H3300 HS, reaching up to 600 m²/h Optional white, or white + primer Tsdpfx Alezx Hars Ujb Built for high-volume / multi-shift production A Agfa +1 Main commercial advantages Growth path: start with the H3300 S and upgrade as production volume increases. Wide application range: signage, displays, POP/POS, boards, banners, décor, packaging and other rigid/flexible applications. Low ink consumption: Agfa's Thin Ink Layer™ technology helps reduce ink usage while maintaining strong image quality. Automation: options include automatic board feeding and automated loading/unloading. Asanti workflow: integrates production preparation, job management and calibrated print modes for color consistency.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, We have a Kirk-Rudy Firejet C4 inkjetsytem full colour KR519 year 2021 available. Tjdpfszwlbrsx Al Usb Complete with feeder, alignmenttable, mailbase and conveyor. This machine has not been used much so now for you a chance to buy a almost new one for a used price!

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Xerox Nuvera 288” black-and-white production system Item for sale: 1 x Xerox Nuvera 288 with the following specifications: incl. high-capacity stacker finisher incl. 3 x ZJC-2 paper trays incl. insertion unit Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Tsdpfx Alszxxhbe Usb Meter readings: Total: Approx. 18,991,424 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 2-blade cutter/trimmer, the “Canon 2-Knife Trimmer-A1” Item for sale: 1 x Canon 2-Knife Trimmer-A1 Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Todpfx Aszxw H Njl Uob Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Tjdpfezxwypex Al Usb Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand Canon POD Deck-E1 printer accessory. Item for sale: 1 x Canon POD Deck-E1 We are happy to configure the machine to your requirements. Please feel free to contact us! Tedpfx Alozxrnzo Uob Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Ricoh Pro C9210” colour production system Item for sale: 1 x Ricoh Pro C9210 with the following specifications: incl. Vacuum Feed LCIT RT5120 incl. Heidelberg Prinect DFE Controller incl. High Capacity Finisher SK5040 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 18,492,779 pages Colour: Approx. 16,852,732 pages Black: Approx. 1,640,047 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Tjdpfjzxrfasx Al Usb Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand black-and-white production system, the “HP Latex 800W” Item for sale: 1 x HP Latex 800W We are happy to configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear Todjzxqgcopfx Al Uob (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Ricoh Pro C9200” colour production system Item for sale: 1 x Ricoh Pro C9200 with the following specifications: incl. Fiery Controller E-86 incl. Vacuum Feed LCIT RT5120 incl. Finisher Cover Interposer Tray CI50 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,672,086 pages Colour: Approx. 1,337,380 pages Black: Approx. 334,706 pages Condition: Todpfszxqdusx Al Uob This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 400 g/m², paper width (min.): 120 mm, paper width (max.): 330 mm, total length: 1,220 mm, total width: 730 mm, total height: 1,090 mm, Equipment: documentation/manual, New, original packed Plockmatic LCT3500 Large Capacity Tray New price €24,400 Suitable for the following machines: - Ricoh Pro C7200s Series - Ricoh Pro C9200 Series Technical specifications: Paper Size Min. Ricoh Pro™ C7200s Series: 120 x 210 mm Paper Size Min. Ricoh Pro™ C9200 Series: 120 x 487.8 mm Paper Size Max. 330x700 mm Stock Range: 65 - 350gsm (up to 400gsm dependent on paper type and quality) Paper Types: Plain, Index, Coated, Recycled paper No. of Trays: Dual (Vacuum) Tray Capacity: 3500 sheets of 80gsm plain paper (2 x 1750 sheets) Double Feed Detection: Optical and ultrasonic sensors, two independent systems Auto Sheet Size Detection: Yes, on standard paper sizes Tray Status Indicators: Individual tray LEDs in segments of four indicating paper amount and status Todpfx Aljwq St Re Uob

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototype construction, and industrial series production. BC2 upgrade / modernization The system has been upgraded to the newer BC2 system level. According to the available documentation, a comprehensive retrofit was carried out with the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system level compared to earlier X Line 2000R models. Technical data Power connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Tedpfxszcn Efj Al Ueb Dual laser system Powder handling system Material feed system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-Box replaced Functional test performed No error messages documented after completion of the work Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application areas Additive manufacturing of metal components Aerospace industry Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of supply Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of supply Condition Used Machine from industrial production environment Laser windows clean and clear Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of supply as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.