Used Printing Plate Punch for sale (18,685)

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T Kdodpfxeh Auahj Addsg

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Kdedpfxswtc Hge Addeg Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots Kdjdswlhd Uepfx Addog T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Marble plate Ksdpfxoig Hu Ns Addjdg Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm Kjdpfx Aewnfz Neddodg 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Kdjdpfxowlhfls Addog Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, number of ink cartridges: 4, color channels: 4, number of print heads: 1, resolution (max.): 1,600 dpi, paper weight (min.): 40 g/m², paper weight (max.): 400 g/m², paper width (min.): 1 mm, paper width (max.): 330 mm, paper height (min.): 300 mm, INKBAGS Printer The INKBAGS Printer is a high-performance industrial single-pass printer designed for precise, high-speed printing on various absorbent packaging materials. Equipped with an advanced Epson Micro Piezo Electrical printhead, it ensures exceptional print accuracy, sharp details, and consistent color quality across a wide range of substrates. Technical Specifications: Printhead: Epson Micro Piezo Electrical Print Width: up to 330 mm (13 inches) Print Length: up to 2000 mm (78.7 inches) Printer Dimensions: Width: 3.3 m (10.8 ft) Length: 1.7 m (5.6 ft) Height: 1.6 m (5.25 ft) Ink System: The INKBAGS Printer uses a modern CISS (Continuous Ink Supply System), allowing for continuous, stable ink flow and cost-efficient operation without frequent cartridge changes. It supports both water-based and pigment inks, giving flexibility for different materials and application needs. Software Package: Each printer comes with dedicated proprietary software and a RIP system for precise color management and file preparation. This ensures seamless workflow from design to print and optimal output quality. Ideal Applications: The INKBAGS Printer is an ideal solution for businesses focused on eco-friendly and customized packaging production. It prints perfectly on: Paper and cotton bags Kedpfxjxtu Exo Addsdg Cardboard boxes and packaging Food packaging Pizza boxes Other absorbent (water-absorbent) materials Key Advantages: Industrial-grade single-pass printing with high speed and precision Reliable CISS ink system with low running costs Compatible with both water-based and pigment inks Built-in professional RIP and printer management software Perfect for custom packaging production and branding

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Kodpfxevy Aips Addedg Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: used, Year of construction: 2010, functionality: fully functional, FOR SALE: Antec Legend 8/8 Screen Printing Press - The World's Finest Manual Machine! We are selling our Antec Legend 8/8 manual screen printing press. Widely recognized as the best manual machine available, the Legend offers an unparalleled combination of features: Extremely Lightweight: Makes operation smooth and less fatiguing. Precise Registration: Ensures high-quality, multi-color prints with perfect alignment. Fast and Efficient: Designed for rapid production without compromising accuracy. Incredibly Easy to Maintain: Simple design for hassle-free upkeep and longevity. True All Heads Down Capability: Allows for printing with multiple operators simultaneously, significantly increasing production speed. Included with the press is a Workhorse Flash Dryer with Stand-Off. This machine is ready to go and waiting for its new owner to start printing! Contact us for more information and to arrange a viewing. Kodpfxowk E Iho Addsdg

Condition: excellent (used), Printing International Cristal 90X2 Kdjdpsv Iyh Sjfx Addeg

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER Kodpfx Adexwnw Aedjdg 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Kjdpfx Adshg Rcxsdjdg Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Kedjuzv Tzepfx Addjdg Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, Original purchase price of the printer was €486,000 EUR net! TECHNICAL DETAILS Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly print capacity: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 gsm to 350 gsm Paper weight range (when validated): up to 400 gsm Duplex printing media weight: 350 gsm MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Dimensions main unit C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm Kodpfjx Ezgpox Addjdg FEATURES Offset-like print quality Suitable for specialty and textured media In-line color management sensors Automatic calibration

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,769 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm MACHINE DETAILS Control: Siemens Kdsdpsx I E Ezefx Addsg Machine weight: approx. 17,500 kg Operating hours: 62,769 h EQUIPMENT Scraper position change monitoring Thread forming Marking – quick beading Slitting Multishear Multibend Backgauge repositioning Roller tools Setup cassettes Ball transfer table

Condition: ready for operation (used), functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL DETAILS Press force: 220 kN Max. sheet thickness: 6.4 mm Travel path X-axis: 2,500 mm Travel path Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360°/sec Punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Workpiece weight: 150 kg Tool stations: 15 pcs Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Kdjdpfox I Hh Rsx Addjg Pneumatic follow-up cylinders Small parts sensor for programmable part chute Parts box for finished parts Chip conveyor with container Scratch-reduced processing Air-cushioned mounting Additional clamping bridge Prepared for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Alignment system for loading stack with spreader magnets Manually movable scrap grid system

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 4,800 dpi, paper weight (min.): 52 g/m², paper weight (max.): 360 g/m², counter reading (black): 894,166, counter reading (color): 1,513,515, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Paper weight (min.): 52 g/m² Paper weight (max.): 360 g/m² Kdsdsx R Dtispfx Addeg Speed: 85 A4 pages/minute Resolution: 2,400 x 4,800 dpi Paper formats: A6 up to 330.2 x 487.7 mm Banner Sheet Option: up to 330.2 x 1,260 mm MACHINE DETAILS Operation: 17-inch color touchscreen Warm-up time: < 300 seconds Counter reading color: 1,513,515 impressions Counter reading B/W: 894,166 impressions EQUIPMENT Vacuum Feed LCIT RT5120 (2,200 sheets each, incl. Bridge Unit BU5010) Decurl Unit DU5060 Booklet Finisher SR5060 (stacking up to 3,000 sheets, stapling up to 100 sheets, booklet making) EFI Color Controller E-45A (Fiery FS300 Pro) with 1 TB HDD, 8 GB RAM, Windows 10 Enterprise EFI Impose (imposition and gang printing) ES-2000 (UV & Non-UV) spectrophotometer TCRU/ORU Type S9 (Set A) ORU Type S9 (Set B)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Kjdpex Trdnefx Addodg Roll material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The print heads of the machine need to be replaced. The seller can provide a complete service for this.

Condition: used, Used Seitz Enzinger Noll reportedly model 60/150 type C stainless steel filter press. Unit has (67) 600mm x 600mm stainless steel plates and (1) stainless steel end plate which will accomodate (66) filter sheets giving approximately 22m2 filtration area. Unit is type C with central tightening device via spindle and capstan handle. Kdedpfsx Ryrbox Addeg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Model: AHS 25/16 Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Kdjdpfx Adjxwzbzsdog Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Weight: 10 570 kgs

Condition: used, functionality: fully functional, Year of construction: 1999, machine/vehicle number: HIQN99034, control type: CNC control, actuation type: hydraulic, punching force: 22 t, stroke length: 50 mm, 37 Stations 3 Auto index stations 22 ton capacity Kdodpfsyahifex Addog Max sheet size - 2500 x 1260 mm Regularly serviced with recent lead screw replacements (Both axis plus bearings) Full set of tooling included 4 point Sick laser guard included Machine Tables included if needed Viewing and inspections welcome Machine will be in use until mid February after which it will be put into storage Please don't hesitate to contact us for further information

Condition: good (used), Year of construction: 1991, functionality: fully functional, product width (max.): 2,500 mm, working width: 2,500 mm, roll diameter: 1,500 mm, year of last overhaul: 2024, We have available for sale a Cobden Chadwick pre-print press line- 2500mm wide- see photographs. This is a fantastic opportunity and is the best conditioned pre-print press we have ever offered for sale/relocation. The machine controls were upgraded by Pre-Print Technology Ltd in 2017 – new servo control deck positioning + downstream register system. Kjdpfjt Uc Iqsx Addedg Please kindly let us know as soon as possible if you would like to visit the site to inspect the press line. Cobden Chadwick Linerflex press - manufactured 1991 Machine location: United Kingdom Cobden Chadwick Linerflex press consisting of the following 6 colour C.I 1 colour pre-tint unit with cantilever 1 colour downstream unit with cantilever Twin Wood & Stirling unwind Marquip splicer Warburton rewind Drive system for pre-tint, chill rollers, varnish unit and rewind Drying: IR cassettes by Waverley Fife web guiders Sero motors for print deck positioning Original press performance parameters; Maximum speed: 300 metres per minute Repeat range: 700mm to 2000mm all units Gear pith: 10mm Maximum print width: 98” PLC: Mitsubishi Main press frames: Light blue azure Ancillary equipment Heaford Cobra mounter proofer AV Flexologic Mounter proofer Print roll stock (120 off) including print gear and sleeve attachments Anilox roller stock (17off) including anilox gear and clutch attachments. Cantilever print sleeves (12off) Print roller and anilox storage racking system with overhead hoist C.I temperature control unit Chiller unit for chill rolls Print unit doctor chambers with related inking system Mobile operator trolley for print deck access Mobile Print roller and anilox roller trolleys C.I hoist lifting attachment bar Machine voltage: 415V, 50hz

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Ksdpevn D Tfsfx Addodg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: used, Year of construction: 2018, functionality: fully functional, FOR SALE: Canon Océ VarioPrint 6330 TP Titan – High-Speed Monochrome Production Press Boost Print Production & Efficiency A fully functional, high-speed Canon Océ VarioPrint 6330 TP Titan digital production printer is for sale. This machine is known in the commercial print industry for its productivity, offset-like quality, and media versatility. It is ideal for high-volume environments, commercial print shops, and in-house operations. These operations focus on books, manuals, transactional documents, and direct mail. Key Features & Benefits: Ultra-High Speed: It can achieve speeds of up to 328 A4 impressions per minute with Océ Gemini Instant Duplex Technology. This technology prints both sides at once in a single pass. Superior Print Quality: It delivers quality with a 600 x 1200 dpi resolution. It uses advanced Océ Copy Press technology for a matte finish and precise registration. Wide Media Versatility: It handles media weights from 50 gsm up to 300 gsm (and up to 350 gsm for validated stock). This includes specialty and textured papers, tabs, and carbonless forms. Robust Paper Handling: It comes with a high-capacity system, expandable to multiple trays. It has a paper input capacity of up to 24,000 sheets. Eco-Friendly Operation: It features low power consumption, minimal ozone emissions, and low heat output. This makes it efficient and operator-friendly for any print room. Workflow Integration: It is managed by the PRISMAsync controller. It includes DFD interface support for connection to third-party finishing options (binding, saddle-stitching, punching). Machine Specifications: Model: Canon Océ VarioPrint 6330 TP Titan Condition: Ready for operation (used), fully functional Year of Manufacture: Year 2018 Resolution: 600 x 1200 dpi (up to 180 lpi) Max Monthly Volume: Up to 10,000,000 A4 images Max Paper Size: Up to 350 mm x 500 mm (13.8" x 19.7") Configuration Includes: (Please check photos to be sure) Paper Input Modules, 8x Duo Paper Trays] 2x High Capacity Stackers] PCL, IPDS, PostScript language support] PRISMAsync Controller] Current Meter Readings: See Photo. Price: (Negotiable) Kdjdpfx Asx Hz T Eoddeg The original price for this configuration was over €140,000! Logistics: The buyer is responsible for arranging shipping. . The machine is located in [UK].

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Stainless Steel Heat Exchanger Type APV H17, Temperature max. 110 C Kdedof Srmzopfx Addeg From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar