Used Probe for sale (1,446)

Condition: used, This listing is for 1 of 11 Invitrogen Powerease 500 Power Supply. The unit is in full working condition and is ready for immediate release. This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release Tsdpfxsxx Afko Adlef he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, Year of construction: 2000, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 430 turning speeds 10.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 600 U equipped with a 30-tool changer, a swivel axis, and an NC combination table (600 x 370mm / ø 280mm). The machine has approx. 17.754 H spindle hours. Additional equipment: - Swivel axis Tsdev T Nr Repfx Adlef - NC combination table (600 x 370mm / ø 280mm) - Probe system (SK 40 - RENISHAW) - Tool breakage monitoring The machine is in well-maintained condition, has been used exclusively for educational and training purposes. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 600 | C600 | C-600 | C600U

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm Todpfx Aoxztg Dodlof cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Tedpjxy Rx Iofx Adljf Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Holding tube for 25 seconds at 15,000 litres/hour in 3" pipe pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey Tsdpsxxi R Tjfx Adlof High level probe for the balance tank connection to UF Allen bradley for operation Full complete specification can be sent on request.

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Tsdpfx Adovta Sbelef Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: used, This listing is for a Hanna Instruments HI 9060 Waterproof Thermistor Thermometer The unit is in full working condition and is ready for immediate release. The Hanna HI 9060 is a high-performance thermistor thermometer specifically engineered for use in challenging wet and humid environments. Its robust design and advanced features make it an essential tool for professionals in the food industry and other applications requiring precise temperature monitoring. Key Features: Waterproof and Rugged Design: Built to withstand harsh conditions, the HI 9060 is waterproof and can endure the rigors of busy environments, ensuring reliability in various settings. Dual-Level LCD Display: The intuitive dual-level LCD display shows the current temperature alongside the highest and lowest temperature extremes recorded during the session, allowing for quick assessments. Temperature Measurement: Measures temperatures in both degrees Celsius and Fahrenheit, providing flexibility for diverse applications. Interchangeable Probes: Compatible with a range of interchangeable probes (sold separately), enabling users to customize the thermometer for specific tasks or environments. Advanced Memory Functions: Equipped with memory capabilities that store high and low temperature readings, facilitating easy tracking and reporting of temperature variations. Tjdpexxz Htofx Adlef Long Battery Life: Enjoy an impressive battery life of up to 3000 hours, minimizing the need for frequent replacements and enhancing operational efficiency. Auto-Off Capability: The thermometer features an auto-off function that conserves battery life by shutting down after a period of inactivity. Low Battery Detection: Alerts users when battery levels are low, ensuring that the thermometer is always ready for use. Ideal Applications: Food Services: Essential for monitoring temperatures in kitchens, ensuring food safety and compliance with health regulations. Food Preparation: Perfect for checking temperatures during cooking and baking processes, helping to maintain quality and safety. Packaging: Ideal for verifying temperature conditions during food packaging, ensuring that products meet safety standards. Storage and Transport of Food: Crucial for monitoring storage temperatures in refrigerators and freezers, as well as during transit, to prevent spoilage. Wet and Humid Environments: Designed to thrive in damp settings, making it suitable for various applications beyond food service, such as laboratories or agricultural environments.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, As-new DMG CTX 1250 TC 2nd Generation Siemens 840 sl Operate 21.5" Ergoline 5-axis simultaneous machining Counter spindle ISM 76 synchronized Todpfox Ah Edex Adlef 48 tool positions HSK 63A DIN 69893 Year of manufacture: 2019 Low operating hours (see photo) Max. turning diameter: 500 mm Max. turning length: 1200 mm Draw tube internal max. 77 mm main spindle Further technical specifications in PDF Blum TC 60 touch probe Bar feeder interface Turning/milling spindle with increased speed 20,000 rpm 19/22 kW Scraper-type chip conveyor incl. coolant tank 600 l 8 bar/20 l/min Centrotex clamping system incl. accessories. The machine is available immediately.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details core drilling diameter max. 3 - 28 mm bore depth 1000 mm control Heidenhain TNC 640 x-axis 1000 mm y-axis 800 mm z-axis 800 mm spindle head - swivable (W) +15°/-30° deg Tsdpfx Aexztd Nsdlof B-axis (table) 360.000° deg table surface area 1000 x 1000 mm table load 5,0 t tool taper SK 40 spindle turning speed range 60 - 6000 U/min spindle motor 12 kW total power requirement 58 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,35 x 4,75 x 3,80 m Additional information 5 axes Deep Drilling-Milling-Machine A current geometry measurement report is available. Equipped with: HEIDENHAIN TNC 640 control 5 CNC AXES X – Y – Z – W – B NC rotary table 360.000 deg. Milling performance 150 cm3/min. Direct linear position measuring system Digital AC drives Table design with Hirschmann zero-point clamping system NC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg. Automatic tool changer for 24 tools Internal coolant supply High-pressure coolant system 1200 liters for deep hole drilling oil up to 140 bar Paper belt filter system SIEMENS extinguishing system Fire protection system Spindle cooling Oil temperature control 3D HEXAGON probe RENISHAW tool measurement Electronic handwheel OPT kinematics Chip conveyor Coolant pressure and flow control Collision and vibration monitoring Feed control Coolant gun MONTRONIX machine airbag Oil mist extraction 2 clamping plates Walk-in full enclosure with roof and opening for crane loading Included in delivery: Operating manual Documentation Machine parameters on USB stick

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Tjdpfx Aoxy Rxhedlof Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,200 kg, first registration: 12/2025, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, tail-lift, Are you looking for a different model, engine variant, dimensions, or other specifications? Feel free to contact us. We offer financing and leasing at attractive terms – also available for the Netherlands, Austria, and new businesses! --- Vehicle: * Wheelbase: 4,100 mm * 8-speed automatic transmission * Single cab * Twin rear wheels (rear axle) * Gross vehicle weight: 5.2 tonnes * Digital tachograph * Speed limiter: 90 km/h Interior: * Luxury driver’s seat, air-suspended and heated * Comfort headrests * Multifunction leather steering wheel * Fabric seat covers Safety & Assistance: * AEBS + City Brake * Driver airbag * Front area monitoring (MOIS) Tedjvtvp Aspfx Adlsf * Lane Centering Plus (LC) * Eco-Smart function * Driver attention alert system (DDAW) * Turn Assist, passenger side (BSIS) * Rear blind spot radar * Traffic sign recognition incl. ISA Wheels & Technology: * Electrically adjustable & heated mirrors * Digital radio DAB, 7" touchscreen * Apple CarPlay/Android Auto * All-weather tires * Trapezoidal spring with auxiliary spring on rear axle * Climate control with automatic air conditioning * Additional hot water heater * Light and rain sensor * Fog lights * Full-LED headlights * 4G Connectivity Box incl. TCO * Adaptive cruise control (ACC) * Toll system preparation (OBU) * AdBlue tank 20 L incl. driver heating * Integrated 90 L fuel tank * Battery 12V 110 Ah Refrigerated body: * Insulation 80 mm / 100 mm * Non-slip floor surface * Reinforced floor * Two rear doors with individual locks and 270° opening angle * Side door with separate lock and entry step * Partition wall with removable fan * Second probe for multi-temperature operation * Combined anchor lashing rails (1 left & 1 right) * 1 lashing strap * LED interior and exterior lighting * Roof spoiler * Drain holes in box front * Double sealing system at loading openings * Reversing camera * Side underrun protection * Side marker lights Refrigeration unit: * Carrier Xarios 5 (-20°C to +20°C) * Cooling on the road and at standstill * With heat pump * Temperature recorder (thermograph) * ATP certificate possible Tail lift: Dhollandia * Max. lifting capacity 1,000 kg * Platform depth: 1,800 mm * Roll-off protection * LED warning lighting * Remote control with spiral cable * Trailer coupling for up to 3.5 t towing capacity (tow ball, 12V 13-pin socket) Additional extras for the body are available at extra cost. --- Note: Please call briefly before your visit – we ensure your desired vehicle is available on site. If it is not located in Wachtendonk, we are happy to deliver from our stock. Custom builds available on request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing or typographical errors. Subject to error and prior sale. Best regards, Pimenta Automobile

Condition: used, Year of construction: 2017, x-travel 1.000 mm y-travel 800 mm z-travel 700 mm Control Siemens 840D sl Operate spindle tunring speed 14.000 U/min torque 160 Nm power capacity 29 kW swivelling range 0 - 180 ° tool taper SK 40 rotary table adjustment 360 ° Rotary table dimensions 1.000 x 800 mm number of tool places 54 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - 40 bar internal coolant supply - Swivel milling head - Integrated rotary table - Workpiece touch probe with wireless transmission, Heidenhain TS 460 - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light - Siemens Sinumerik 840D sl Operate control with MDynamics - 5-axis machining package Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Tedpfsxzk Sdjx Adlef Prior sale is reserved.

Condition: used, This listing is for 1 of 3 Pierre Guerin Technologies EVO 15/23L Fermenters. The unit is in full working condition and is ready for immediate release. Please see spreadsheet attached at the bottom of listing for all parts included with this unit. The Pierre Guerin EVO Series fermenters and bioreactors are designed for precision in bioprocess research and development. These mobile, SIP (Sterilize-In-Place) and CIP (Clean-In-Place) units are ideal for applications ranging from educational settings and R&D to pilot-scale productions within GLP or GMP environments. They are versatile and suitable for various culture types, including yeast, bacteria, fungi, or cell cultures, operating in batch, fed-batch, continuous, or perfusion modes (with appropriate accessories). ----- Key Features Vessel Design: - Capacity & Configuration: Working volume of 10-20L with a total volume of 23L. - Material & Surface Finish: High-grade 316L stainless steel, with an internal surface finish of Ra ≤ 0.8 µm and pipework Ra ≤ 1.6 µm, ensuring sterility and cleanability. - Sterilization & Temperature Control: Double jacket for automatic media sterilization and precise culture temperature regulation. - Operating Pressure: Maximum vessel pressure of 2 barg, jacket pressure up to 2.5 barg. - Headplate Design: Removable flat headplate for easy access and maintenance. Agitation System: - Drive Type: Available in mechanical coupling with a single seal or magnetic coupling with a synchronous drive for reduced contamination risk. - Impeller Configuration: Standard setup includes one HTPG4 impeller, one Rushton impeller, and one baffle, providing optimal mixing for various culture types. - Speed Range: 30 to 1200 RPM with precision control. - Torque Monitoring: Integrated system for monitoring agitation performance. Instrumentation & Control: - Measurement & Control: - Temperature: PID-controlled temperature regulation. - Agitation Speed: Precise real-time adjustment. - pH: Online monitoring and automated control. - pO₂ (Dissolved Oxygen): Optical probe-based real-time monitoring and control. - Foam Level: Automatic detection and antifoam control. - Weight Measurement: Integrated load cell system. - Total or Viable Cell Density Measurement: Optional high-accuracy sensors available. - Neptune Control System: - Graphical Interface: Intuitive touchscreen display. - GMP Compliance: 21 CFR PART 11 & GAMP 5 validation-ready. - Advanced Process Control: Includes profile management, real-time calculations, and automation strategies. Tsdpoxxx Hqjfx Adlef - Remote Monitoring & Data Logging: Supports Ethernet™ network integration for remote supervision and maintenance. Gas & Fluid Management: - Gas Control: Automatic control of air, oxygen, nitrogen, and CO₂ sparging. - Peristaltic & Precision Dosing Pumps: Integrated system for nutrient and pH adjustments. - Media Addition & Sampling: Dedicated ports for sterile sampling and automated feed control. Cleaning & Sterilization: - SIP (Sterilize-In-Place): Automated sterilization cycle. - CIP (Clean-In-Place): Fully integrated system for effortless cleaning between batches. ----- Specifications: - Nominal Working Volume: 10-20 liters - Minimum Working Volume: 7 liters - Total Volume: 23 liters - Agitation Speed Range: 30-1200 RPM - Material: 316L stainless steel with Ra ≤ 0.8 µm finish - Pressure Ratings: Vessel 2 barg, Jack...

Condition: ready for operation (used), Year of construction: 2008, This STAMA MC526 was manufactured in 2008. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Application Types Milling Tedpfxjx Aligs Adlof

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm Tedjxy Nlmopfx Adlof y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, Year of construction: 1999, Description: Suitable for grinding spiral and straight-fluted tools as well as for surface grinding using fixed pre-programmed standard grinding programs. Accessories: Total enclosure Glass scales on the X and Z linear axes PSM 118 measuring and positioning probe for spiral pitch and breast bevel Stepless speed control Manual central lubrication Wet grinding device 1 grinding wheel guard Machine light Tedpfx Adexy N A Ejlsf 2 grinding wheel flanges. Hub X-axis (NC): 360 mm stroke Workpiece spindle holder A-axis (NC): SK 50 Y-axis stroke (manual): 250 mm Grinding spindle speed infinitely variable: from 2000 - 9000 rpm Z-axis stroke (manual): 300 mm drive power grinding motor: 2.2 kW Grinding wheel diameter: Max. 200 mm mass: about 1600 kg Connected load: 2.2 kW (400 V / 50 Hz) Dimensions W x D x H: approx. 1395 x 1565 x 1990 mm colour: Grey

Condition: used, Year of construction: 1998, functionality: fully functional, CNC lathe, spindle diameter: 250 mm, spindle speed min./max.: 16,000–32,000 rpm, spindle power: 27 kW, spindle torque: 80 Nm, 4 axes: X, Y, Z, C, cross travel: 275 mm, longitudinal travel: 635 mm, HEIDENHAIN CNC, turret with 12 tools, turret with rotary tool device, probe for tool correction, since 2017: Numerical control and pressure regulator mandrel have been changed, sale only with toolholders, approx. 19 pieces. Tjdpfsx Aqt Rox Adlef

Condition: good (used), Systemate D90 Drum / Thigh Deboner Systemate thigh deboner D90 debones thighs and drumsticks with optimum performance, delivering maximum profitability. D90 thigh deboner is regarded as the industry benchmark for delivering highly efficient production of deboned thigh and drumstick meat. The system is characterized by its simplicity of operation and unsurpassed yield prior to and post trim. Operation One or two operator loads the thigh or drumstick into a the product holder which carries it through a sequence of deboning steps integrated into the carousel mechanism: The product is positioned by the probe. The thigh joint is pushed gently through the diaphragm, while the thigh meat, including kneecap remains on the product holder. The bone is released from the diaphragm. The deboned thigh meat, with or without skin, is discharged on a separate location. After deboning, the only remaining operations necessary are trimming and grading. The D90 thigh deboner can mechanically debone anatomical thighs at a maximum capacity of 5.400 products per hour. The thighs are supplied to the stand alone machine by using e.g. a belt conveyor. Todpjukd H Hsfx Adlef Year: 1996 Capacity: Up to 5.400 bph Machinedimensions (LxWxH): 290x130x200 cm

Condition: used, This listing is for a Pierre Guerin Technologies EVO 50/75L Fermenter. The unit is in full working condition and is ready for immediate release. Please see spreadsheet attached at the bottom of listing for all parts included with this unit. The Pierre Guerin EVO Series fermenters and bioreactors are precision-engineered systems designed for advanced bioprocess research, development, and small-scale production. These mobile, Sterilize-In-Place (SIP) and Clean-In-Place (CIP) units are optimal for applications ranging from educational settings and R&D to pilot-scale productions within GLP or GMP environments. They are versatile and suitable for various culture types, including yeast, bacteria, fungi, or cell cultures, operating in batch, fed-batch, continuous, or perfusion modes (with appropriate accessories). Key Features: Vessel Design: - Capacity & Configuration: Working volume of 50-60L with a total volume of 75L. - Material & Surface Finish: High-grade 316L stainless steel, with an internal surface finish of Ra ≤ 0.8 µm and pipework Ra ≤ 1.6 µm, ensuring sterility and cleanability. - Sterilization & Temperature Control: Double jacket for automatic media sterilization and precise culture temperature regulation. - Operating Pressure: Maximum vessel pressure of 4 barg, jacket pressure up to 6 barg. - Headplate Design: Removable flat headplate for easy access and maintenance. Agitation System: - Drive Type: Available in mechanical coupling with a single seal or magnetic coupling with a synchronous drive for reduced contamination risk. - Impeller Configuration: Standard setup includes one HTPG4 impeller, one Rushton impeller, and one baffle, providing optimal mixing for various culture types. - Speed Range: 30 to 1200 RPM with precision control. - Torque Monitoring: Integrated system for monitoring agitation performance. Instrumentation & Control: - Measurement & Control: - Temperature: PID-controlled temperature regulation. - Agitation Speed: Precise real-time adjustment. - pH: Online monitoring and automated control. - pO₂ (Dissolved Oxygen): Optical probe-based real-time monitoring and control. - Foam Level: Automatic detection and antifoam control. - Weight Measurement: Integrated load cell system. Tjdpfoxxwb Hjx Adlof - Total or Viable Cell Density Measurement: Optional high-accuracy sensors available. - Neptune Control System: - Graphical Interface: Intuitive touchscreen display. - GMP Compliance: 21 CFR PART 11 & GAMP 5 validation-ready. - Advanced Process Control: Includes profile management, real-time calculations, and automation strategies. - Remote Monitoring & Data Logging: Supports Ethernet™ network integration for remote supervision and maintenance. Gas & Fluid Management: - Gas Control: Automatic control of air, oxygen, nitrogen, and CO₂ sparging. - Peristaltic & Precision Dosing Pumps: Integrated system for nutrient and pH adjustments. - Media Addition & Sampling: Dedicated ports for sterile sampling and automated feed control. Cleaning & Sterilization: - SIP (Sterilize-In-Place): Automated sterilization cycle. - CIP (Clean-In-Place): Fully integrated system for effortless cleaning between batches. ----- Specifications: - Nominal Working Volume: 50-60 liters - Minimum Working Volume: 35 liters - Total Volume: 75 liters - Agitation Speed Range: 30-1200 RPM - Material: 316L stainless steel with Ra ≤ 0.8 µm finish - Pressure Ratings: Maximum operating pressure 2 barg for ...

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Tools Number of station 20 Max tool diameter 80 mm Tjdpfxox Allzj Adlsf Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: new, Year of construction: 2026, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center EDEL CYPORT CP 4030 Travels X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry passage Y/Z: 3.276 / 1.405 mm Rapid Traverse X/Y/Z 30/30/15 m/min 2-axis-NC-swivel head M-Series of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A100 Speed: 12,000 rpm Power: 42/53 kW (100%/40% ED) Torque: 200/253 Nm (100%/40% ED) Control: HEIDENHAIN TNC 640 HEIDENHAIN wireless electronic hand wheel incl. charging station 5-axis path control DXF-converter CAD-Viewer KinematicsOPT Energy efficiency certificate Remote Service Tool magazine: Number of pockets: 64 pcs. HSK-A100 max. tool diameter: 105/150 mm max. tool length: 300 mm max. tool weight: 8 kg Coolant system Manufacturer: KNOLL Tank volume: 1,600 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Spray gun Chip conveyor Tedpfx Adjir Iczjlsf Coolant-airblast-changeover Oil-Mist extration unit Work piece measuring, Touch probe BLUM TC 60 - radio controlled Tool measuring BLUM LaserControl Micro Single NT Working area coverage Safety light sensors Documentation CE-certification Made in Germany

Condition: ready for operation (used), Year of construction: 2022, operating hours: 100 h, Movement X-Axis Movement 508 mm Y-Axis Movement 305 mm Z-Axis Movement 406 mm Additional Equipment CT-style tool changer grippers / Standard program memory, 1GB / Spindle speed: 6000 rpm / Convenience Package / Early power failure detection module / Ethernet interface / HaasConnect: Remote monitoring / HaasDrop / Lifting device / User-definable macros / M-code for media playback; M130 / Run in safe mode / Standard 1-year warranty / Tool changer with 10-position carousel / Touchscreen control / Visual part programming system / Wi-Fi connection for the Haas control / Work light / Spindle orientation / Coordinate rotation and scaling / Internal high-voltage non-isolated transformer for 380-480V operation; Non-USA WIPS-R Wireless Intuitive Probe System / AAG Automatic Air Cooling System+ / AUGER Auger Chip Conveyor / AUTO LUBE Automatic Lubrication System / CPH-HF High-Flow Coolant Pump / MIN QTY LUBE Minimum Oil Lubrication System+ / P-COOL Programmable Coolant Nozzle+ / PULSEJET PulseJet System+ / RJH-TOUCH-XL Large Jog Handle with Remote Control and Touchscreen Display+ / RTAP-3 Synchronized Tapping+ / FIO Installation Field Installed Options with+ This 3-axis HAAS TM-0P was manufactured in 2022. It features a 508 mm X-axis, 305 mm Y-axis, and 406 mm Z-axis travel, ensuring versatile machining capabilities. Standard features include a 6000 rpm spindle, 10-position carousel tool changer, and touchscreen control. Additional accessories like the Wireless Intuitive Probe System and Auger Chip Conveyor enhance its functionality. If you are looking to get high-quality milling capabilities consider the HAAS TM-0P machine we have for sale. Contact us for more information. Tjdpfxexwfmhs Adlsf Application Types Milling

Condition: new, Year of construction: 2026, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,500 mm, Machine configuration ROTAMILL 2819 - NC Rotary table, Ø1.800 mm - NC Fork-type Milling Head M-SERIES (A- and C-axis) - Milling spindle CST-42-180-S - Tool chain magazine, 54 pockets, HSK-A(T)63 - Chip conveyor - NC Control HEIDENHAIN TNC 640 - Technology package turning - 2-fold head change magazine, fully automated - Preparation of the machine for wet machining - Oil mist extraction unit, approx. 3.000 m³/h - Workpiece measuring touch probe BLUM TC 60 - Tool measuring, BLUM LaserControl Single NT - Kinematic 3D-calibration software - Heidenhain - Kinematic tool kid - CAD-Import (.step; .iges; .dxf) - Remote diagnosis (Teleservice) - Operator and maintenance training (1 day) excl. travel cost and expenses - Loading and (seaworthy) packing charges, FCA Jülich as per Incoterms 2020 - Installation and run-off inside Germany incl. travel costs and expenses OPTIONAL - Coolant unit Technical data - Traverses X-axis = 2,800 mm - Traverses Y-axis = 1,900 mm - Traverses Z-axis = 1,500 mm - Portal clearance (roof)- width (Y) = 2,250 mm - Portal clearance - height (Z) = 1,465 mm - Total weight, approx. = 41,000 kg - Feed rate in X, Y and Z = 50 m/min - Acceleration in X, Y and Z = 4 m/s2 - Feed force in X, Y and Z = 10.000 N Rotary NC-Table Rotary table (C1-Axis) - Face plate, standard = Ø 1,800 mm - Interference diameter = Ø 2,200 mm - Payload – milling, max. = 6,000 kg Drive C1-Axis – turning table HT - Swivel range = 360° (endless) - Rotational speed, max. = 30 rpm - Torque, max. = 7,473 Nm - Clamping moment = 13,000 Nm Fork type NC-Milling-Head M-SERIES (A-Axis) Drive A-Axis - Swivel range = ±110° (60 rpm) - Speed, max. = 100 rpm - Feed rate, max. = 600°/s - Nominal moment = 840 Nm - Clamping moment = 4,000 Nm Drive C2-Axis Tjdpfxjtwatdj Adljf - Swivel range = ±360° - Speed max. = 65 rpm - Feed range, max. = 390°/s - Nominal moment = 1,020 Nm - Clamping moment = 4,000 Nm Milling spindle CST-42-180 S - Power, S1 (S6-40% ED) = 42 (53) kW - Nominal moment = 2,000 rpm - Torque, S1 (S6-40% ED), max. = 201 (253) Nm - Speed, max. = 12,000 rpm - Motor type = synchron/8-pole - Tool holder = HSK-A63 - Clamping system = hydraulic - Clamping force = 20 kN - Installation dimension, stator = Ø 180 mm - Spindle nose, length = 110 mm Accuracies according to VDI / DGQ 3441 - P (X,Y,Z) = 0,012 mm - P (C, A) = 5" - Ps (X,Y,Z) = 0,008 mm - P (C, A) = 3" Tool chain magazine with double arm gripper - Tool pockets = 54 - Tool holder = HSK-A(T)63 - Pocket distances = 110 mm - Tool diameter, fully loaded = Ø 105 mm - Tool diameter, max. = Ø 150 mm - Tool length, max. = 300 mm - Tool weight, max. = 8 kg Footprint & Weight - Length (X) = 6,830 mm - Width (Y) = 6,970 mm - Height (Z) = 5,150 mm

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand HAAS Main Drive Spindle Speed 12000 RPM Tool taper BT 40 Tools Slots in storage 24 Media Internal cooling yes This 3-axis HAAS VF-2SS was manufactured in 2014 and features an internal coolant system (IKZ), a probe, and tool measuring capabilities. Ideal for precise and efficient machining tasks. If you are looking to get high-quality milling capabilities consider the HAAS VF-2SS machine we have for sale. Contact us for more information. Application Types Todpsxx Dvqsfx Adlof Milling

Condition: new, Year of construction: 2026, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, Machine configuration ROTAMILL 2216 * Wide range of rotary table and milling head options available * - NC Rotary table, Ø1.800 mm - NC Fork-type Milling Head M-SERIES (A- and C-axis) - Milling spindle CST-42-180-S - Tool chain magazine, 54 pockets, HSK-A(T)63 - Chip conveyor - NC Control HEIDENHAIN TNC 640 - Technology package turning - 2-fold head change magazine, fully automated - Preparation of the machine for wet machining - Oil mist extraction unit, approx. 3.000 m³/h - Workpiece measuring touch probe BLUM TC 60 - Tool measuring, BLUM LaserControl Single NT - Kinematic 3D-calibration software - Heidenhain - Kinematic tool kid - CAD-Import (.step; .iges; .dxf) - Remote diagnosis (Teleservice) - Operator and maintenance training (1 day) excl. travel cost and expenses - Loading and (seaworthy) packing charges, FCA Jülich as per Incoterms 2020 - Installation and run-off inside Germany incl. travel costs and expenses OPTIONAL - Coolant unit Technical data - Traverses X-axis = 2,200 mm - Traverses Y-axis = 1,600 mm - Traverses Z-axis = 1,200 mm - Portal clearance (roof)- width (Y) = 2,250 mm - Portal clearance - height (Z) = 1,465 mm - Total weight, approx. = 41,000 kg - Feed rate in X, Y and Z = 50 m/min - Acceleration in X, Y and Z = 4 m/s2 - Feed force in X, Y and Z = 10.000 N Rotary NC-Table Rotary table (C1-Axis) - Face plate, standard = Ø 1,800 mm - Interference diameter = Ø 2,200 mm - Payload – milling, max. = 6,000 kg Drive C1-Axis – turning table HT - Swivel range = 360° (endless) - Rotational speed, max. = 30 rpm - Torque, max. = 7,473 Nm - Clamping moment = 13,000 Nm Fork type NC-Milling-Head M-SERIES (A-Axis) Drive A-Axis - Swivel range = ±110° (60 rpm) - Speed, max. = 100 rpm - Feed rate, max. = 600°/s - Nominal moment = 840 Nm - Clamping moment = 4,000 Nm Drive C2-Axis - Swivel range = ±360° - Speed max. = 65 rpm - Feed range, max. = 390°/s - Nominal moment = 1,020 Nm - Clamping moment = 4,000 Nm Milling spindle CST-42-180 S - Power, S1 (S6-40% ED) = 42(53) kW - Nominal moment = 2,000 rpm - Torque, S1 (S6-40% ED), max. = 201 (253) Nm - Speed, max. = 12,000 rpm - Motor type = synchron/8-pole - Tool holder = HSK-A63 - Clamping system = hydraulic - Clamping force = 20 kN - Installation dimension, stator = Ø 180 mm - Spindle nose, length = 110 mm Accuracies according to VDI / DGQ 3441 - P (X,Y,Z) = 0,012 mm - P (C, A) = 5" - Ps (X,Y,Z) = 0,008 mm - P (C, A) = 3" Todpfx Adjr Hn Szsljf Tool chain magazine with double arm gripper - Tool pockets = 54 - Tool holder = HSK-A(T)63 - Pocket distances = 110 mm - Tool diameter, fully loaded = Ø 105 mm - Tool diameter, max. = Ø 150 mm - Tool length, max. = 300 mm - Tool weight, max. = 8 kg Footprint & Weight - Length (X) = 6,830 mm - Width (Y) = 6,970 mm - Height (Z) = 5,150 mm