Used Pull Stud for sale (1,845)

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, grinding diameter:350 mm grinding length:1000 mm centre height:175 mm workpiece weight:120 kg power capacity:5,5 kW turning speeds:max. 25000 U/min control:FMS 5-88 weight of the machine ca.:3,5 t Hjdsdmppqopfx Ahaot precision grinding machine with SONY digital display, coolant system, electronic hand wheel, separate electrical cabinet, emergency cut-off

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Hsdovca Izopfx Ahajt Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Year of construction: 1989, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5117.19, TECHNICAL DETAILS Grinding diameter: 450 mm Grinding length: 1600 mm Center height: 225 mm Control system: Siemens Sinumerik System3 Hjdpfx Ahelnkfasajt Rotational speed: max. 2440 rpm Center distance: 1750 mm Resolution: 0.001 mm Speed: 0.06 - 10000 mm/min Cross slide: 180 mm Feed rate: 0.01 - 5000 mm/min Resolution: 0.0005 mm Workpiece weight: max. 500 kg Tailstock travel: 40 mm Straightness of the outer circumference over 650 mm: 0.004 mm Roundness accuracy: 0.0005 mm MACHINE DETAILS Machine weight: approx. 7.3 t Total connected load: max. 22 kVA

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 019.3790, Machine undergoing repair/overhaul = estimated delivery time approximately 8-10 weeks. Technical data + accessories, see separate PDF. Hsdpfxezbqzae Ahajt

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 011.257.90.043, center height: 175 mm, center width: 1,000 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Maximum turning height: 175 mm Maximum turning diameter: 1,000 mm Longitudinal slide Maximum longitudinal slide travel: 1,050 mm Hjdpfx Aozb Hxnohast Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm Table tilt: max. 8.5° Cross slide Maximum cross slide travel: 275 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm MACHINE DETAILS Control system manufacturer: Fanuc EQUIPMENT - Internal grinding attachment

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, throat depth: 2,700 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, overall weight: 2,120 kg, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, workpiece weight (max.): 2,000 kg, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick! Hodpfjy Tni Tjx Ahaet

Condition: refurbished (used), functionality: fully functional, equipped with a FANUC 16-T CNC control system. Hjdey Txk Uspfx Ahast Technical data and accessories are provided in a separate PDF. The machine has been completely mechanically overhauled.

Condition: good (used), grinding length: 500 mm, A Studer cylindrical grinding machine of the type RHU 500 is for sale The machine is in good condition and fully operational, the guides show hardly any signs of wear. Technical data Grinding wheel diameter: Ø 250 mm Hjdjqzh Elopfx Ahast Sanding length: 500 mm Sanding wheel size: 400 x 50 mm On request, dismantling, loading and transport can be organized throughout Europe for an additional charge Prices plus VAT Glnld8 Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Hodpjlbgfcsfx Ahajt Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar Hodpow T Sc Nsfx Ahaot All technical specifications are given without obligation and subject to errors or omissions.

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm Hjdpfx Aew T Sd Tjhaet CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg Hedpfx Aew T Sh Ejhast TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB All technical details are provided in good faith but subject to errors or omissions.

Condition: excellent (used), FANUC 21i-T Control Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Measuring probe Automatic balancing attachement Hsdpoyabt Defx Ahaet Wheel dresser Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 1981, operating hours: 16,769 h, Center height 175 , Center width 700 , Angled position of turntable 10° , Workhead swiveling 90° , Speed range 30-675 rpm , Morse 5 , Grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW Hedpfxotz T H Ds Ahaot

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Studer S32 with Siemens 840 powerline control and Felsomat handling. 30-degree angled cut. Hjdpswa Im Eefx Ahast Top condition. Machine can be inspected under power.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. Hodpfx Ahsyh R Uweaot For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2002, Studer S60 CNC – Very well-maintained machine Operated solely with oil Year of manufacture: 2002 Center height: 225 mm Control system: Fanuc 16T Hodpfx Aheh Aykioaet

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm Hedpoxlix Dofx Ahajt MACHINE DETAILS Control: Fanuc 16T

Condition: refurbished (used), machine/vehicle number: 1015.54, Completely overhauled cylindrical grinding machine. Centre distance 400 mm, centre height 100 mm. Technical data and accessories as per separate PDF. Hsdoy Hhk Dopfx Ahajt

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, center height: 175 mm, center width: 650 mm, The machine was accepted by Studer and has never been put into operation. Hjdpoyttcqofx Ahajt

Condition: used, Year of construction: 2003, internal diameter 99999 mm grinding depth 99999 mm swing diameter 99999 mm grinding diameter 99999 mm grinding length 200 mm centre height 175 mm CNC internal grinding machine B-axis 4 x 90° Q-axis for adjusting tapers Used with minor maintenance 2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm 1 external grinding motor spindle Fischer MFVS1407 7,000 rpm -Pneumatic power clamping device with 20mm stroke -Dressing device with 2 swivelling arms, hydraulically foldable back Hsdpfxeuxft So Ahajt -Grinding detection ring sensor Dittel on the workpiece headstock -Passive grinding detection with magnetic base -Paper belt filter 375 l

Condition: used, Year of construction: 2002, grinding diameter 250 mm Hedpfx Aovx Dvuehaot grinding length 400 mm centre height 125 mm Control Fanuc 21i-T Maschine gewartet und teilüberholt. -Neue Schleifspindellagerung -Neue x-Achs Spindel -Obertisch überschliffen -Neue Geometrie Tischgeometrie -Neue Geometrie WSS zu Schleifspindeln B-Achse mit 1° Hirth Verzahnung Längspositionierung HF-Innenschleifspindel GAP Papierbandfilter

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Hsdpeywntyefx Ahaet Marposs Messeinrichtung Innenschleifeinrichtung

Condition: used, Year of construction: 1999, functionality: limited functionality, CNC Cylindrical Grinding Machine for Sale – STUDER S40 (1999) We offer for sale a STUDER S40 cylindrical grinding machine, year of manufacture 1999. The machine is in working condition. It is equipped with one grinding spindle and a turret wheelhead suitable for both external and internal grinding operations, making it a versatile solution for precision machining. Control system: FANUC 16 Hedpfxey Elz Dj Ahajt Key Features: External and internal grinding capability Turret wheelhead Reliable FANUC 16 control system Solid and proven STUDER build quality Operator manual. Delivery Terms: EXW (Ex Works) The machine is available for inspection upon request. For more information, photos, or pricing, please get in touch.

Condition: good (used), cylindrical grinding machine Hsdpfx Ahetrgndeaet