Used Punching Crucible for sale (1,637)

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 901116, 110 x 160 cm Inner frame width Net price ex works, without disassembly and transport MANUFACTURER'S PRODUCT DESCRIPTION (see also photos): Versatile and universal production machine for die cutting – creasing – scoring – embossing, and perforating all types of paper – cardboard – solid board – corrugated board – displays plastic films – semi-cutting – gaskets – etc. Isdpfjxy Rptsx Adija Compact design – highest precision – quiet, smooth operation – high hourly output Maximum occupational safety 10 format sizes available Both the base and moving platen frames are welded steel constructions manufactured from single pieces. Bearings are made of bronze in special steel; shafts, tie rods, and helical gears are made of high-grade steel. The ultra-precise eccentric bushes allow for extremely fine pressure adjustment. The eccentric bushes themselves are locked in place by safety gears, effectively preventing unintentional adjustment. The spacious opening and three end positions of the platen facilitate easy feeding and removal, allowing for high average hourly throughput. The guide support is low-maintenance. Continuous operation, single, or skip feed can be selected. Moulding accuracy is especially high with balanced balls. Individual knives can be held for unchanged material without heavy sheet laying. Waste material and corresponding turnover are reduced. All pressure bars are mounted on a mechanically infinitely adjustable auxiliary bridge. Open working area is crucial not only for trouble-free feeding and precise die plate positioning but also for immediate waste ejection and clear view of the belt sleds and feeding rollers. Cutting pressure is transferred via the diameter of the cutting wheels onto several large blocks which are seated against their corresponding bases, ensuring the die-cutting process is unified with the machine base. Power transmission and braking are handled by an electro-pneumatic clutch; a compressor with air reservoir is included. Centralized lubrication system is installed. All pneumatic locking devices are fully integrated. When operating in timer mode, a yellow warning light above the machine is illuminated. An additional safety bar above the closed platen edge stops the platen instantly when activated. The control cabinet beside the machine prevents vibration of the electrical components.

Condition: good (used), Year of construction: 1997, KERMA die-cutter Isdpfx Adjxni Epoiea Max. size: 1220x820 mm Safety fence 2 safety step mats

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, ERBA TITAN 100 x 160 cm year 1977, overhauled in 2007 Iedpfxexn T Hwj Adioa with all standard accessories

Condition: used, Heidelberger platen die-cutter Ijdpfxjxlaf Io Adiea Size 34x45

Condition: good (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, punching force: 350 t, power: 4 kW (5.44 HP), Equipment - Format 82x112cm - Motorized quick-clamping frame - Cutting plate - Timer for opening and closing times - Brake on the flywheel - Pneumatic clutch with safety valve - 3 operating modes - Manual pressure adjustment via handwheel Isdpfx Ajrwi Hvjdija - High-quality safety systems - CE certificate - Long-term spare parts security - Manufacturer: cauhe-industries.com

Year of construction: 1989, condition: good (used), machine/vehicle number: 11848, Punching platen Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, available immediately Ijdpfx Adsrbhd Tsija We have two more Gietz models. Please ask for an offer. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: good (used), Year of construction: 1979, TOSI VERONA Isdpfxoxdu Nrs Adioa Max. size: 1200x1800 mm Min. size: 400x400 mm In production Location: Germany

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Punching plate Crosland CVK 980 Size 78 x 100 cm Year 2004 Ijdpfxewif Hue Adioa in very good working condition available immediately

Year of construction: 1992, condition: used, Die-cutting press (Stanztiegel) Brand: Simplacutter Iodpfxsxcuguo Adiea Size: 82x112 Year of manufacture: 1992

Condition: good (used), Punching crucible Simplacutter, 72 x 102 cm, in a good condition, immediately available If you are interested, we will be glad to inform you about other machines in our house. Iedpfxsiypwae Adioa You are welcome to visit the machine in our house after previous appointment.

Condition: good (used), Year of construction: 2012, Rabolini Imperia FS die cutter Max. size: 1200x1700 mm 2x safety mats Ijdpfxjw Skmws Adisa

Condition: used, Punching machine Bograma Iedpfxjxlr Nrs Adija Description: - Standard equipped

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t Iodpsryaqyjfx Adioa dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: good (used), 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame Ijdpfomxpt Sjx Adioa -Punching tool: 2 columns -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm -Weight: 30 kg

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Isdpfou Hxmzex Adiea

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 21000 kg Main Drive Punching force 300 Kn Number of axis 2 Table Table load 160 kg Control Unit Brand FANUC Isdpfx Ajxy Ap Eodija Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 1999, condition: ready for operation (used), Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Ijdpspmt Ttsfx Adisa Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Iedpfx Adow A Srweija Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: good (used), Year of construction: 1989, functionality: fully functional, Revision 1989 Pressing force: 2x200 kN, Strokes: 40 - 300 strokes/min. Stroke: 50 mm, Clutch: pneumatic, Isdpfxexx T Hfo Adiea Power supply: 380 V, Machine weight: 2,200 kg, additional ejector, factory version with reinforced design

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Ijdpfstv Hzvjx Adioa Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Ijdpem Ak Huofx Adioa Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 2 Ijdpfx Adoxz H Nxsioa This Salvagnini S4X was manufactured in 2008. A robust CNC punching machine, it operates on 400V with a nominal power of 33kW and a current of 58A. Ideal for high precision and efficiency in sheet metal processing. If you are looking to get high quality punching capabilities consider the Salvagnini S4X machine we have for sale. Contact us for more information. Application Types Punching

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Iodpfx Asudn Utedisa Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: excellent (used), Year of construction: 1999, Finnpower A5-25SB Installed 1999 Jetcam offline software Erwin Sick perimeter guard and fence Siemens 840D Punch force 230Kn 20 Tool Station Turrett with multi tool for up to 10 more additional pcs Isdpfoxtuutox Adisa Please feel free to contact if further information is required

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months Ijdpfx Adswag Risisa ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany