Used Pvc for sale (980)

Year of construction: 2008, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed continuously adjustable up to 24,000 rpm Handheld control unit Minimal量 sprühung tensioner detection and tensioner displacement Profile length measurement at the head Barcode scanner 5 pneumatic material clamps light barrier Nlsdpjzx Dz Tjfx Aazjg Additional material stop on the left for long profiles Spindle in like-new condition, spindle feeding force: 16 kN Weight: approx. 2,000 kg

Year of construction: 2006, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Nodox Ecfkjpfx Aazslg Max. travel Z-axis: 280 mm Control E 550 Stepless speed control up to 21,000 rpm Manual control device Minimal quantity spray Automatic tool changer with magazine (4 slots plus angle head) Spanner measurement and clamp displacement 4 pneumatic material clamps Light barrier Weight: approx. 2,000 kg

Condition: used, maximum load weight: 31,550 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2010, loading space volume: 51 m³, Year of construction: 2010, Equipment: ABS, Stock number: 5844 51,000 liter Heitling silo semi-trailer / Steerable / 7 compartments / 3 axles / Solimar discharge system ----* Manufacturer: Heitling * Type: SDBH 51 * First registration: 10/2010 * Gross vehicle weight: 39,000 kg * Unladen weight according to vehicle registration: 7,450 kg * Payload: 31,550 kg * Axles: 3 x Mercedes Benz, with 1st axle as a lift axle / 3rd axle forced steering * Suspension: Air suspension with lifting and lowering function Nedpfx Aajzpdqpezolg * Tires: 385/65 R 22.5, approx. 50% tread, on aluminum rims * EBS Wabco * Color: Yellow * TÜV (technical inspection): 07/2026 * Volume: 51,000 liters in 7 compartments (5.5m³/5.5m³/9.0m³/7.5m³/7.5m³/7.5m³/9.5m³) * Pressure tank: 2 bar * Operating temperature: -20 degrees to +50 degrees * 7 compartments * 5 funnel cones * 7 sliding covers NW450 * 6 bottom discharge flaps DN 200 * Solimar discharge system * Control panel at the rear * Central discharge to the rear * 3-compartment hose reel box on the left and right * Access with walkway at the front and rear left * Wabco Smartboard * Tool box on the right * Full-load support legs (drop-down supports) * Cyclone * Individual fenders * LED work lights * LED reversing lights * Aluminum tool box on the right * PVC tool box on the left * Loading pressure gauge German trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the details. We do not assume any liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Njdpozm Hr Rjfx Aazslg Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Extremely easy roll loading. Njdpjzmx Nujfx Aazelg 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Condition: good (used), Vertical carousel rack for carpet and flooring rolls. Robust and fully functional carpet paternoster / carousel rack. The system is ideal for space-saving vertical storage and presentation of carpet rolls, PVC flooring rolls, or other heavy rolled materials. Technical Details Length: approx. 4,000 mm Capacity: approx. 12–16 support bars / roll positions The carpet and flooring rolls belonging to the respective carousel rack can be purchased separately for an additional €1,000 net. Item location: Frankfurt am Main, Germany Nljdpfx Aaozz Icgozjg Collection period: Collection must take place between the end of September and the beginning of October. Option 1 – Self-collection: Dismantling and transport are carried out independently by the buyer. Option 2 – All-inclusive package: We can provide professional dismantling including delivery throughout Germany for a flat additional charge of €1,000 net plus VAT. Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de

Condition: good (used), Robust and fully functional carpet paternoster / vertical carousel rack manufactured by Hubtex, model TRPA. Nlsdezz Ia Sepfx Aazsg The system is ideal for space-saving vertical storage and presentation of carpet rolls, PVC flooring rolls, and other heavy rolled materials. Basic Data & Weights Manufacturer: Hubtex Maschinenbau GmbH, Fulda Model / Type: TRPA Machine number: 39080 Maximum load capacity: 2,750 kg Length: approx. 5,000 mm Permissible imbalance: max. 500 kg Machine weight: 1,200 kg Capacity: approx. 14–16 support bars / roll positions Electrical Data Supply voltage: 380 V, 3 N~ + PE, 50 Hz Rated power: 0.75 kW Rated current: 2.1 A Protection class: IP44 The carpet and flooring rolls belonging to the carousel rack can be purchased separately for an additional €1,000 net. Item location: Frankfurt am Main, Germany Collection period: Collection must take place between the end of September and the beginning of October. Option 1 – Self-collection: Dismantling and transport are carried out independently by the buyer. Option 2 – All-inclusive package: We can provide professional dismantling including delivery throughout Germany for a flat additional charge of €1,000 net plus VAT. Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2015, Kannegiesser belt conveyor belt conveyor with DUO-Pusher GF 2500-680-600 RA1309 The Kennegisser belt conveyor is from 2015 and in good (used) condition. In addition, it is 2500 mm longer and equipped with a DUO pusher (sorting pusher). The pusher is used to sort laundry items according to selected criteria. The folded laundry item is pushed by a pusher plate onto a following conveyor or a roller conveyor. 2 support feet are included in delivery. Technical data: Conveying length (NL): 2500 mm Framework width (NB): approx. 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 850 mm +/- 90 mm Number of support feet: 2 pieces Conveying speed (v m/s): 0.1 - 1.1 m/s, reversing operation with FU Drive: Normal Motor Electrical data: 400 V / 50 Hz Deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-layer PVC belt, black, smooth Nedpfx Aok Aa Stoazjlg Year of construction: 10/2015 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with FU 2x sorting slides (DUO Pusher) 2x light barrier 1x deflection drum cover All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, Year of construction: 2018, Kannegiesser belt conveyor GF 1000-680-600 RA1303 The Kannegiesser belt conveyor is from 2018 and is in good (used) condition. Technical data: Conveyor length (NL): 1000 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Nlsdpfoukkqxox Aazeg Overall height (BH): 80 mm Conveyor speed (v m/s): 0.67 m/s Drive: Bauer Gear motor Electrical data: 400 V / 50 Hz, 0,37kW Return roller (UT): Ø = 60 mm Belt: 2-ply PVC belt, gray, smooth Year of construction: 10/2018 Optionally available: Supports Side guides Frequency converter for stepless speed control All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or email. We are happy to help you plan and implement your projects. We are happily looking forward to hearing from you. Sincerely, Your team at Dr. Sonntag GmbH & Co. KG - your specialist and contact for intralogistics

Condition: excellent (used), DOUBLE SCREWS for WEBER DS105.17D EXTRUDER Application: PVC PIPES SCREW NUMBER: 014.185605 r.920 S Nsdpfxoywr Tdj Aazjlg Screw diameter: 104.7 mm and 104.8 mm

Condition: used, maximum load weight: 28,550 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2020, loading space length: 7,300 mm, loading space width: 2,200 mm, loading space height: 1,300 mm, loading space volume: 24 m³, Year of construction: 2020, Equipment: ABS, Air suspension, lift axle, BPW disc brakes, EBS, PVC half-shell mudguards, central drop-down support leg, aluminium rims, foldable underrun protection, thermal insulation, raised rear wall, catwalk with ladder, PVC rear tarpaulin, PVC roller tarpaulin Nlsdpsy Dy Agofx Aazog

Condition: used, Year of construction: 2016, Overview This CEEM TSS-1845 is a fully automatic side-seal shrink-wrapping machine with an integrated shrink tunnel, built in 2016. Products are fed on the conveyor, wrapped in transparent shrink film with a continuous side seal, and passed through the heat-shrink tunnel to form a tight, retail-ready transparent pack. The machine handles single items as well as grouped products. The side-seal unit is manufactured by Alpha Pack Europe (Italy) as model APSS-5022 and supplied under the Spanish CEEM brand (Grupo CEEM Packaging S.A., Elche). A constant-temperature thermal system provides uninterrupted sealing; product changeovers are made simply by turning the hand-wheels, without changing product guides, and product-length sensors allow automatic length control via the touch-panel control. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: CEEM - Grupo CEEM Packaging S.A. (Elche, Alicante, Spain) - Model: TSS-1845 (side-seal unit OEM: Alpha Pack Europe APSS-5022) - Year of manufacture: 2016 - Machine type: fully automatic side-seal shrink-wrapping machine with shrink tunnel - Applicable film: POF / PE / PVC, thickness 0.05 - 0.08 mm - Max. sealing width: 500 mm - Max. product height: 220 mm - Packing speed: 30 - 45 packs/min - Conveyor speed: up to 30 m/min Nledpfezk H Nkjx Aazeg - Film reel: outer Ø up to 400 mm, core Ø 75 mm - Power: approx. 3 kW, 380 V - Compressed air: 5 - 6 bar - Weight: approx. 850 kg (side-seal unit; shrink tunnel additional) - Side-seal unit dimensions: approx. 2,100 x 1,960 x H 1,900 mm (excl. tunnel) Equipment - Automatic side-seal sealer with motorized film unwind and continuous side sealing - Heat-shrink tunnel with adjustable temperature control - Touch-panel control, hand-wheel format changeover, product-length sensors - Infeed conveyor Condition Used - in very good, clean condition; still installed and under power at the current site and available for inspection on request. Availability Immediately. Location: Spain. Dismantling, handling and truck loading can be quoted on request (EXW). The machine can be visited on request.

Condition: used, Year of construction: 1998, Overview This complete glass bottling line was manufactured between 1996 and 1998 by various European manufacturers. The line is designed for the filling and packaging of bottles and includes depalletizing, rotary light vacuum filling, capsule application and smoothing, corking and screw capping, and automatic palletizing. The equipment is suitable for automatic bottling operations with a production capacity of approximately 10,000 bottles per hour.  Technical data - Capacity: approx. 10,000 bottles/hour - Application: Automatic bottling and packaging of bottles - Filling system: Light vacuum filling - Rinser: Penetrating nozzle rinser - Cleaning system: Compatible with automatic CIP cleaning - Closure types: - T-top corks - Pilfer caps - Stelvin caps - Compatible closure sizes: - 31.5 × 44 mm - 30 × 60 mm - Capsule application: Automatic capsuling machine with integrated thermal heads for PVC capsule smoothing - Capsule smoothing: Automatic smoothing machine for complex capsules and tin capsules - Palletizer: - Drag-type automatic palletizer - Compatible with European and American pallets - Format memory for up to 15 palletizing patterns - Utilities: - OCME Dorado 162-T Depalletizer: 6 kW - Irundin 36/44-8 Filler: 10 kW - Robino & Galandrino M. Monostadio Z T 6: 4 kW - Nortan Aurora 160: 3 kW - Tedelta CR 504: 3 kW - OCME P115/N/S Palletizer: 15 kW Njdpfxszh Ikdj Aazjlg Scope of Delivery  - Depalletizer | OCME | Dorado 162-T | 1998 | High-speed drag depalletizer - Rotary filler | Irundin | 36/44-8 | 1998 | Light vacuum filler with penetrating nozzle rinser and CIP compatibility - Capsule applicator | Robino & Galandrino | M. Monostadio Z T 6 | 1998 | Automatic capsuling machine with integrated thermal heads - Capsule smoothing machine | Nortan | Aurora 160 | 1996 | Automatic capsule smoothing machine - Corking and screw capping machine | Tedelta | CR 504 | 1998 | Automatic closure application for corks, pilfer and Stelvin caps - Automatic palletizer | OCME | P115/N/S | 1998 | Drag-type palletizer with format memory

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  - Year of Manufacture: 2010–2014 - Application: Water and other beverages - Capacity: - Approx. 2,000 bph (330 ml) - Approx. 1,670 bph (500 ml) - Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) - Closure Type: 26 mm crown caps - Configuration (Monobloc): - 16 rinsing heads - 16 filling heads - 1 crowning head Nlodpfx Aaoyb Tkdjzsg Scope of Delivery  - Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph - Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph - Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts - DE filter | Spadoni | - | 2011 | 80 hl/h - Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules  

Condition: new, mileage: 2 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels LOOKING FOR A 4x4 REFRIGERATED TRUCK FOR DEMANDING DELIVERY ROUTES? Keeping temperature-sensitive cargo protected is one challenge. Getting that cargo to its destination when the road becomes difficult is another. The Mercedes-Benz Atego 1725A 4x4 Refrigerated Truck combines a 245 HP Mercedes-Benz EURO 3 drivetrain with front and rear differential locks, a purpose-built insulated GRP body and Carrier refrigeration equipment. The result is a refrigerated truck developed for cold-chain distribution where reliability, cargo protection and increased mobility all matter. AT A GLANCE - Mercedes-Benz Atego 1725A - 4x4 Refrigerated Truck - 245 HP / 180 kW - EURO 3 Diesel Engine - Front & Rear Differential Locks - Manual Mercedes-Benz Transmission - Approx. 5-Metre Refrigerated Body - GRP Insulated Sandwich Panels - 50 mm Side-Wall & Roof Insulation - 80 mm Floor Insulation - Carrier Refrigeration System - Twin Insulated Rear Doors - Approx. 4,892 mm Internal Cargo Length - Heavy-Duty Aluminium Cargo Floor - Air Conditioning - Mixed-Use Tyres - Available for Worldwide Export Why This Configuration? Refrigerated distribution becomes more demanding when destinations are located beyond conventional road networks. The Atego 1725A addresses both parts of that challenge. The Mercedes-Benz 4x4 chassis provides the mobility. The insulated refrigerated body provides the cargo protection. A 245 HP six-cylinder diesel engine, manual Mercedes-Benz transmission, transfer case and differential locks on both axles create a drivetrain suited to demanding routes. Behind the cab, the approximately five-metre GRP refrigerated body provides an insulated environment supported by Carrier refrigeration equipment. One vehicle designed around moving temperature-sensitive cargo where it needs to go. Built for Temperature-Controlled Distribution The refrigerated body uses insulated sandwich-panel construction with gel-coated GRP surfaces and internal reinforcement. Side walls and roof incorporate 50 mm insulation, while the floor uses 80 mm insulation together with marine plywood and a heavy-duty aluminium upper surface. Nsdpey Rt R Rjfx Aazslg Twin insulated rear doors are sealed using dedicated PVC gaskets to help protect the controlled cargo environment during transport. Interior lighting provides additional practicality during loading and unloading operations. Carrier Refrigeration The refrigerated body is equipped with a Carrier refrigeration system to support controlled cargo temperatures during transport. Combined with the insulated body construction, the cooling system creates a practical cold-chain solution for regional and international distribution. Whether moving food products, agricultural produce or other temperature-sensitive cargo, the vehicle has been configured around dependable refrigerated transport. 4x4 When the Delivery Route Gets Difficult Cold-chain logistics do not stop at city limits. Remote communities, agricultural areas, construction projects, mining operations and infrastructure sites may all require refrigerated deliveries over roads that are...

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: RR500FB, conveyor belt length: 5,000 mm, conveyor belt speed: 800 mm/s, total length: 5,250 mm, total width: 1,250 mm, total height: 1,900 mm, overall weight: 105 kg, discharge height: 1,900 mm, power: 0.37 kW (0.50 HP), input voltage: 230 V, input frequency: 50 Hz, input current: 16 A, SCHORR Firewood Conveyor Belt, Electric, 5m, 230V Directly from the splitter to the trailer Anyone who makes firewood knows the time-consuming task: it's not the splitting that strains your back, but the bending, collecting, and throwing afterward. The electric SCHORR conveyor belt takes over precisely this step: the logs fall directly from the splitter onto the belt or are simply placed on it unsorted; the cleats and the conveying trough safely guide them upwards, and in the end, they end up where they belong: on the trailer, in the container, or in the grid box. With a belt speed of 0.8 m/s, the belt easily keeps pace with the splitter and saw. You continue working at your own pace, and the belt clears away behind you: stacking instead of hauling. 5 meters in length, up to 1.9 meters discharge height Five meters of conveying distance and a discharge height of up to 1.9 meters: this allows you to fill high sideboards, grid boxes, and containers without lifting a single log by hand. The installation angle can be used up to a 19° inclination, and up to 100 kg can be placed on the belt at the same time. The trough-shaped conveying trough (390 mm wide at the top) keeps the logs in line, and the cleats reliably carry them along, even uphill. And the belt can be set up quickly: you can easily pull it to the next work location using the two wheels, and you can adjust the discharge height using the height-adjustable support stand. This ensures a continuous supply of logs, from the first to the last log of the load. Socket instead of high voltage The 370-W electric motor runs on any standard 230-V socket: no high-voltage connection, no gasoline, no noise, no exhaust fumes. This means that the conveyor belt can also be used in the hall, barn, or at the house connection, where internal combustion engines and 400-V devices would be unsuitable. The technology behind it is deliberately kept simple: robust PVC belt, solid frame construction, few wear parts, easy to maintain and repair. And if something does happen: wear and spare parts are in stock, and we carry out repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. Technical data Njdpfx Aaezwm Dnjzslg Manufacturer: SCHORR Model: RR500FB Type: Belt conveyor with cleats Drive: Electric, 230 V / 50 Hz Motor power: 370 W Conveying length: 5000 mm Max. discharge height: 1900 mm Max. inclination: 19° Max. belt load: 100 kg Belt speed: 0.8 m/s Belt: PVC, 100 mm wide Cleat height: 30 mm Conveying trough (top / bottom): 390 / 104 mm Switch: 230 V, 16 A Cable length: 1,850 mm Dimensions (L × W × H): 5,250 × 1,250 × 1,900 mm Weight: 105 kg

Condition: used, Year of construction: 2018, total length: 1,850 mm, - Bedienung Sitz - Tragfähigkeit / Last 8,0t - Nennzugkraft N 1500 - Achslast mit Last vorne/hinten kg: 560/870 (672 / 1013) - Achslast ohne Last vorne/hinten kg 560/ 720 (672 /863) - Bereifung Vollgummi, SE, Luft, Polyurethan Luft - Räder, Anzahl vorne/hinten (x = angetrieben) 1 / 2x - Spurweite, hinten (mm) 860 - Sitzhöhe bezogen auf SIP/ Standhöhe (mm) 1020 - Kupplungshöhe (mm) 285, 340, 395 - Ladehöhe ohne Last (mm) 645 - Ladeflächenlänge (mm) 520 (265) - Überhanglänge (mm) 350 - Ladeflächenbreite (mm) 900 -Wenderadius (mm) 1650 - Kleinster Drehpunktabstand (mm) 600 - Fahrgeschwindigkeit mit /ohne Last km/h 12/20 - Zugkraft mit /ohne Last N 1600 - Maximale Zugkraft mit /ohne Last N 6500 - Betriebsbremse Elektrisch/hydraulisch - Fahrmotor, Leistung S2 60 min kW 4,5 (AC) - Batteriespannung/Nennkapazität (5 h) (V) / (Ah) o. kWh 48/375 - Energieverbrauch nach VDI-Zyklus kWh/h 4,27 (cycl. 2012) - Ausführung des Fahrantriebs elektronisch / stufenlos - Schalldruckpegel LpAZ (Fahrerplatz) dB (A) 60 - Konstante Geschwindigkeit bei Steigungen - Stromkreisunterbrecher für Notfälle - Redundant ausgelegte Notfallsicherheitsschaltungen - Elektrische Hupe - Robustes Stahl-Chassis - Einfacher Wartungszugriff auf alle wichtigen Komponenten - Anschluss für Diagnosecomputer (CAN-Bus-System) - Interaktives Digital-Display - Gekapselte und verpolungssichere Anschlüsse für eine hervorragende und vibrationsbeständige Verbindung - Großzügige Ablagefächer - Anschluss für Hilfsstromversorgung (12 V) im Armaturenbrett - Schlüsselschalter - Verstellbarer Sitz mit PVC-Bezug - Dreirad-Konfiguration für optimale Manövrierfähigkeit - Seitlicher Batteriewechsel, 48-V-Ausführung Nsdsxpx Ucopfx Aazslg - Mehrstufige Anhängerkupplung am Heck - 3-stufige Anhängerkupplung (Heck) - Zweistufige Fahrgeschwindigkeitswahl - Robuste Federung und Schwingarmaufhängung an allen drei Rädern - Gekapselter Drehstrom-Fahrmotor mit 4,5 kW

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox Nodpjzf E Dvefx Aazelg KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Nljdezk N Ehjpfx Aazog Location: Röllbach

Condition: used, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2003, next inspection (TÜV): 03/2027, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 93 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, 3-axle Kögel SN 24 Standard Tautliner VIN: 717108 Chassis / Components: Nedpfx Asz D Ny Ajazolg * Air suspension // Raise and lower * Lift axle * Haacon support legs * 3 x BPW Eco Plus axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 50/30%, Middle approx. 50/60%, Rear approx. 40/30% * Fifth wheel height approx. 1,150 mm * 1 x PVC storage box Body: * Tautliner Standard * Certificate EN 12642 Code XL * Edscha * Side curtains * Lashing eyes per side Weights: * Gross vehicle weight: 35,000 kg * Tare weight: 6,800 kg * Payload: 28,200 kg Other: * German vehicle * MOT (TÜV) ---- New MOT/technical inspection and weight adjustments (increase or decrease) are available upon request. _____ We don't leave you alone even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and spelling errors, and prior sale. _____ About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just the vehicle that counts, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! _____ Our service for you: Vehicle loading We will help you with loading your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will assist you in obtaining export or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: side flap, sandwich panel construction Equipment: - PVC flooring - Supports - 25mm insulated wall Net price: €8,193.28 / Gross price: €9,750.00 Article number: BTH220402023.01 Technical data: • Brand: Blyss • Model: HB20421HT • Vehicle type: sales trailer • Vehicle condition: new • Initial registration: without initial registration • TÜV/MOT: 2 years from initial registration • Interior dimensions (LxWxH): 400 x 200 x 230 cm • Exterior dimensions (LxWxH): 610 x 210 x 276 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,000 kg • Unladen weight: 840 kg • Payload: 1,160 kg • Chassis: low loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Stable V-shaped drawbar, hot-dip galvanized • Tandem axle • Floor panel made of plywood • Side walls made of sturdy GRP sandwich, 25 mm thick • Rounded corner profiles for an aerodynamic look • Sales flap on the right side, lockable • PVC flooring • Door in the front panel, can be locked from the inside and outside • Step on the drawbar Nodpfoyacgrjx Aazjlg • Support wheel with clamping bracket • 4x scissor supports mounted incl. crank • Maintenance-free rubber spring axle from KNOTT • Reverse driving assistance system • KNOTT inertia coupling and parking brake • Plastic mudguards • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap, sandwich construction Equipment: - 25mm Iso panel - PVC flooring - Supports Net price: €7,890.76 / Gross price: €9,390.00 Article number: BTH115362023.02 Technical data: • Brand: Blyss • Model: H15362HN • Vehicle type: Sales trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 360 x 203 x 230 cm • External dimensions (L x W x H): 524 x 215 x 277 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,500 kg • Unladen weight: 690 kg • Payload: 810 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Sturdy V-shaped drawbar, hot-dip galvanized • Single-axle • Floor made of multiplex • Side walls made of sturdy GRP sandwich, 25 mm thick Nlodpsyacglofx Aazog • Sales flap on the right side • PVC covering on the floor • Additional sales flap at the rear • Door in the front panel, lockable from inside and outside • Step on the drawbar • Support wheel with clamping bracket • 4 scissor supports mounted incl. crank • Maintenance-free rubber spring axle from KNOTT • Shock absorbers incl. 100 km/h registration • Automatic reversing system • KNOTT inertia coupling and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates incl. customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system - Convenient insertion of the profile bar without interfering milling units Njdpsyrh Ncjfx Aazolg - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Drive power: 1.5 kW at 400 V Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Code: 0482 Nljdpfx Asz Ebdioazeg Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 110

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Side flap, sandwich construction Equipment: - PVC flooring - Supports - 25mm insulated wall Net: €12,478.99 / Gross: €14,850.00 Article number: BTH227622223.02 Technical data: • Brand: Blyss • Model: H27622HTN • Vehicle type: Sales trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 620 x 223 x 230 cm • External dimensions (L x W x H): 787 x 236 x 280 cm • Permissible total weight: 2,700 kg • Unladen weight: 1,040 kg • Payload: 1,660 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Stable V-shaped drawbar, hot-dip galvanized • Single-axle • Floor panel made of plywood • Side walls made of sturdy GRP sandwich, 25 mm thick • 2x sales flap on the right side • PVC flooring • Sales flap also at the rear • Door in the front wall, lockable from inside and outside • Step on the drawbar • Support wheel with clamping mechanism • 4x scissor supports mounted, including crank • Maintenance-free rubber spring axle from KNOTT • Shock absorber including 100km/h registration • Reversing aid • KNOTT overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light Njdpfxjx Srrce Aazolg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale exceptions apply -