Used Pvc Twin Screw Extruder for sale (8,593)

Condition: used, Year of construction: 1993, screw conveyor diameter: 150 mm, rotational speed (max.): 75 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Extruder unit Screw diameter: 150 mm L/D ratio: 10 Screw speed: approx. 75 rpm MACHINE DETAILS Drive Motor power: 90.0 kW Voltage: 380 V Dimensions and weight Footprint: 4.0 x 1.2 m Overall height: 2.3 m Gkodpfx Aj Ai Nftekhed Weight: 6,500 kg EQUIPMENT Twin screw Three-phase motor Ex-protected motor ATEX design

Condition: used, Year of construction: 1989, machine/vehicle number: EO 0324/88, screw conveyor diameter: 25 mm, overall weight: 450 kg, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Extruder Type: Twin-screw extruder Screw diameter: 25 mm Processing length: 500 mm L/D ratio: 20 Number of heating zones: 3 Heating: electric Cooling: water MACHINE DETAILS Type: DC motor Motor power: 6 kW Voltage: 200 V Screw speed: 0–450 rpm Temperature control unit Power: 3.5 kW Voltage: 380 V Control cabinet Gjdpfxe Akb Dxj Akhskd Dimensions: 0.8 x 1.0 x 2.0 m Dimensions and weight Footprint: 1.8 x 0.8 m Overall height: 1.1 m Weight: 450 kg EQUIPMENT Feeding hopper Metering screw for feeding Temperature control unit Control cabinet (condition as inspected) Note: Without extruder screws.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz Gksdpfx Akj Ah Ei Nehjd AC control voltage: 230 V, 50 Hz DC control voltage: 24 V Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dosing speed: 102 rpm EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Note: The machine is sold without a melt filter, water bath, and strand granulator.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") Gkjdpfx Ajznkx Dokhod The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2000, screw conveyor diameter: 210 mm, screw conveyor length: 1,400 mm, shaft diameter: 100 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Screw press Screw diameter: 210 mm Screw length: 1,400 mm L/D ratio: 7 Shaft diameter: 100 mm Pitch: 250/140 mm Inlet: Ø 245 mm Rotational speed: approx. 43 rpm Material: Stainless steel 1.4571 (316Ti) MACHINE DETAILS Press pressure: max. 20 bar Operating pressure, double jacket: max. 6 bar Motor power: 22.0 kW Gkede Ai Ng Hopfx Akhsd Voltage: 400/690 V Dimensions and weight Footprint: 3.6 x 0.9 m Overall height: 1.3 m Weight: 2,950 kg EQUIPMENT Double screw Double jacket CE marking

Condition: used, Year of construction: 2000, screw conveyor diameter: 210 mm, screw conveyor length: 1,400 mm, overall weight: 2,950 kg, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Screw diameter: 210 mm Screw length: 1,400 mm L/D ratio: 7 Inlet: Ø 245 mm Gsdps Ai Tlrsfx Akhokd Speed: approx. 43 rpm Material: Stainless steel 1.4571 (316Ti) MACHINE DETAILS Press pressure: max. 20 bar Operating pressure, double jacket: max. 6 bar Drive Motor power: 22.0 kW Voltage: 400/690 V Dimensions and weight Footprint: 3.6 x 0.9 m Overall height: 1.3 m Weight: 2,950 kg EQUIPMENT Twin screw Double jacket CE marking Note: Without sieve plate holder (swing plate missing)

Condition: used, Year of construction: 1991, machine/vehicle number: 91, screw conveyor diameter: 350 mm, overall weight: 11,000 kg, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Gedpfj Ai Eq Eox Akhskd TECHNICAL DETAILS Material: Construction steel Suitable for: PVC Screw Screw diameter: 350 mm L/D ratio: 6 Inlet: 350 x 285 mm Extrusion head Number of strands: 167 MACHINE DETAILS Drive DC motor, main drive: 180 kW DC motor, auxiliary drive: 53.7 kW Voltage: 400 V Dimensions and weight Space requirement: 5.5 x 1.7 m Overall height: 2.0 m Weight: 11,000 kg EQUIPMENT Double jacket Heated screw Extrusion head End face cutter

Condition: used, Year of construction: 2006, Main areas of application: Animal feed industry: Production of high-quality sinking or floating fish feed and pet food. Food industry: Processing of cereals, protein concentrates and structured food ingredients. Gkjdpfx Aovfxqyekhod The Kahl LTW 160 twin screw extruder is a high-performance industrial machine from the German manufacturer Amandus Kahl, primarily used for mixing, kneading, cooking, and shaping viscous materials (such as animal feed, fish feed, or food components). The machine is characterized by its modular design and integration into complete, turnkey production lines. Format: Screw diameter (??): 160 mm Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Year of construction: 2008, condition: used, empty load weight: 2,650 kg, screw diameter: 150 mm, tank capacity: 650 l, machine/vehicle number: 292964, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Container emptying station Hopper: Stainless steel container, type 7_192671 Capacity: approx. 650 l Hopper dimensions: 1,300 x 1,300 x 300 mm Conical base: 900 mm Hopper outlet diameter: 250 mm Container inlet diameter: 400 mm Metering screw Screw diameter: 150 mm Pitch: 100 mm Outlet diameter: 150 mm Screw speed: 26 rpm MACHINE DETAILS Motor power: 2.2 kW Voltage: 230/400 V (Ex) Crushing/mixing shaft Design: Twin-shaft crusher above the metering screw Inlet diameter: 250 mm Dimensions and weight Footprint: 2.5 x 1.7 m Overall height: 3.0 m Weight: 2,650 kg EQUIPMENT Container emptying station with hopper Twin-shaft crusher (crushing/mixing shaft) above the metering screw Metering screw, highly polished ATEX design Mounted on a frame Gsdpj Akbfasfx Akhokd

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 Gksdpfx Aksz Dt Spshed YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Gksdpox Sq I Nefx Akhjd Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Gjdei Dtbqjpfx Akhskd Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Gkedo Afnqcopfx Akhsd Below are the specifications of the proposed model: Screw diameter: 42 Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Effective penetration ratio: 1.5

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing Gkjdpfx Akju Hik Dehed - Control system

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Gkedpfx As Ai Sq Uskhod Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Godpfjz S Idkex Akhjkd Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 120 mm, variety of extruders availiable full pellet lines and pipe aswell as sheet lines including tooling too many to list Godo Akdiijpfx Akhokd

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Gsdpfx Akezc I Igshskd Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: 8063MU, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! Gkodpfs Ai Sfqsx Akhed TECHNICAL DETAILS Compressed air output Delivery rate: 1,740 l/min Operating pressure: 7.5–8 bar Speed: max. 1,500 rpm Electrical data Connected power: 11 kW Dimensions and weight Dimensions (L x W x H): 1,300 x 700 x 950 mm Weight: 400 kg External reference: Präzitec - Lot 4

Year of construction: 1989, condition: good (used), Werner ZSK 58/32 D twin-screw extruder Year: 1989 110 kW motor Gjdpfx Aozktrrokhskd

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel Gjdpfsz Nmfbsx Akhekd • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing Gkedpfxei Dtbus Akhed > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. Gkodpfx Akjz A R R Hehod We have other compounding lines and accessories in stock and ready for delivery.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Gkodpey Ufk Rsfx Akhod Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit Gkedpjycuuysfx Akhod • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.