Used Quadro Kl for sale (3,789)

Condition: excellent (used), The product to be processed is fed into the screening chamber via a feed hopper. The built-in screen assembly consists of a conical stationary screen – Ø 200 mm, height 120 mm – and a two-blade rotor. The finished product then falls into a container to be provided. The discharge height is 1,100 mm. The screen chamber is mounted to the frame using quick-release fasteners. Nsdpfoytp T Esx Anfowf The scope of delivery of the screening system includes 10 screen inserts. The drive is provided by an infinitely variable 5 kW Stoeber drive MNT 132S; EEX II; T3 via frequency converter, with a speed range of 0 – 1,400 rpm. Product throughput depends on screen size and product characteristics and ranges from 100 to 1,500 kg/h.

Condition: ready for operation (used), machine/vehicle number: 194S, Quadro Comil 194S № : 194-0743 Machine: Material : stainless steel Motor : 4 KW Nedpfoudynrsx Anfewf Rotor dimensions : 195x105mm Sieve dimensions : dia. 200x120mm Inlet : Ø 150mm Outlet Ø 250mm Motor: 4 kW 400 Volt

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Nwjdovbdpyspfx Anfjf Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height Nwodpjh Nrh Uefx Anfof max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: reconditioned (used), functionality: fully functional, used bun roll line Kemper Quadro, 5 lines, overhauled, with head machine (245 cm long), double sprinkling (330 cm long) and setting table (300 cm long), width of the line 125 cm, head machine: no. 93228, art. no. 650010, 16 A, 400 V, 500 Hz Nwedpfxeugwcls Anfef

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Nwsdpfx Aeyw N Apenfjf Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Njdpfx Anoyvvkwsfowf Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Njdpfxsxf Utao Anfjwf Weight with tool: 370 kg Good condition

Condition: like new (used), Year of construction: 2022, Helium leak detector Manufacturer: Leybold Type: Phoenix Quadro EU Nsdpjt Urlrefx Anfjwf Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.)

Condition: excellent (used), Year of construction: 2012, Used WP Kemper Quadro Filius divider Compact dough divider for automated production of square and rustic rolls. Technical data: Capacity – 1,400–4,000 pcs/h, Number of rows – 1–6, Weight range – 25–360 g, Divider dimensions (W x H x D) – 745 x 1801 x 2770 mm, Versatile production on a small footprint, Nwjdpfsw Idztox Anfef Stainless steel housing, Set of cutting rollers, Adjustable flour dusting on the dough band.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 66000102, Pallet feeder, Vaculift, Vacubelt, DV Pump, MBO MPC Control, ASP 66 Shingle belt press delivery Nodpfjhqhgqox Anfswf Machine nr: 66000102

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter Nwjdpel Dpc Eefx Anfsf 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Year of construction: 1997, condition: used, Built in 1997 Pile height 400 mm Nsdpfjc Rhr Ssx Anfowf section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Speed max 60.000 Ex./h Weight 980 kg (approx.)

Condition: good (used), Size: max 500 x 330 mm min 140 x 150 mm Product thickness: side 4-96 Seiten Speed: max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm Power requirements 2 kW (220/380V, 50Hz) Length 3077 mm Width 894 mm Nwodpfxog Du Auo Anfef Height 1835 mm Weight 960 kg (approx.)

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: Nwedpfxodmdt Uo Anfef • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Condition: used, Pressing force: 560 kN For example, punch a 30 mm hole in 15 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Nwsdpfx Ansxz Ep Dsfsf

Condition: excellent (used), Year of construction: 2006, REF: MM6167 1 x Lister-Kuhlung milk cooling system. A robust and reliable piece of equipment designed for the efficient cooling and storage of milk in a food production or dairy environment.  Technical specification ⚙️ ✅ Manufacturer - Lister-Kuhlung ✅ Type - KL 2,7 PS VA T K Z.  ✅ Date of manufacture - 2006.  ✅ Electric supply - 400 V / 50 hz / 3 phase.  ✅ Power - 2.5 kW / 6.5 Amps.  Nwedpfx Anew H A Udjfef ✅ Maximum pressure - up to 16 Bar. ✅ Maximum temperature - +22C. Typical applications ⚙️ Dairy Farms: For initial cooling and bulk storage of milk after milking. Milk Processing Plants: Used in the initial stages of processing to maintain milk temperature before pasteurisation or other treatments. Artisan Cheese and Yogurt Makers: Ensures the freshness of milk used in crafting high-quality dairy products.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, Nwodpfjyv Da Hex Anfef 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2578, - Type: TLH-B-K5-800 - Excavator weight class: 12.0 t - 16.0 t - Cutting width: 800 mm Nwjdpfxsvu Umco Anfof - Weight: 458 kg - Volume 0.411 m³ - Adapter: MS21

Year of construction: 2026, condition: as good as new (ex-display), Spray cleaning system - Parts washing system with hinged door 1-tank version (washing), tank vol. 320 litres basket: LxW 1.100 x 1.100 mm useful height: 800 mm max. loading weight: 700 kg pump pressure of washing pump: 4,3 bar, pump power: 5,5 kW heating (electric) 20 kW; heatable up to 80°C control: Siemens Logo inclusive - steam vapour extraction and condensation water return Nsdpfjd Rkmxsx Anfswf - automatic water refill - autom. chemical dosing (0,8 - 5,5%, adjustable) - insulation of the complete plant - plant completely made of stainless steel 1.4301 - basket rim (removable on one side) - 7-day timer for the electr. heater - E-spray pipe h= 450 mm - Preparation for oil separator (electrical and mechanical) available New unit; currently used in our technology centre for washing tests

Year of construction: 1969, condition: used, Motor potentiometer, regulator, motor controller, rotary potentiometer Nedpfjn Tvbrsx Anfewf -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm -Weight: 9.1 kg

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm Nwjdpfx Ansik Sl Hefof -Weight: 3145 kg

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg Nwjdpfx Anewrn U Hefsf

Condition: used, Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal Nwjdehu Ddzspfx Anfjf -Manufacturer: Beckhoff, bus terminal 4-channel digital input -Type: KL 1904 -Rated voltage: 24VDC -Number: 5x clamp available -Price per piece -Dimensions: 67/15/H100 mm -Weight: 0.1 kg/pc.

Condition: used, Year of construction: 1992, Falzmaschine / Folding Machine Stahl KC 78/6-KL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1992 - Serial-No. 4642/92-19602 Arbeitsbreite max. 780mm / Working width max. 780mm Palettenanleger / Pallet Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles Nwjdpfovkkiljx Anfjf 2. Station 2 Schwerter / 2. Folding Unit 2 knives  Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Soft PU Falzen, guter Zustand / Soft PU Rolelr, good condition Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test