Used Rack And Pinion Cutter for sale (15,195)

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Iaedpfxjix Ahbe Addjl

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Iedpjd Tqalefx Addoal - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2019, Roland SolJet PRO 4 XR-640 Eco-solvent and cut-to-length printer - 1,63 cm wide CISS ink system - ink is about 40% cheaper. The equipment is very little used, is in production and can be viewed / tested. Printing speed up to 49,1m2/hour. It has been designed for high production yet combines all of Roland's unique and innovative applications plus some new ones. Among its main features are quality and speed as well as the ability to achieve metallic shades, printing on transparent materials and a significant colour tone enhancement, making it the world's first utility to use Light Black outdoor ink. The Roland SolJet Pro XR-640 provides quality prints with EcoSol Max2 inks, strong colours with high durability. The ink has a very low odour. Best quality for indoor and outdoor at the most common width. Very high productivity with low maintenance. Maximum material width:1.625 mm; - Maximum print resolution: 1440 dpi; - Variable Droplet with 7 different droplet sizes; - A new generation of EcoSol Max 2, Nickel-free, eco-friendly inks; - Banding-free printing even at high speeds; - Evolved roll feed system; - Take up roll rewind system (works for printing and cutting); - Automatic maintenance & head cleaning system; - Built-in Heater/Dryer; - VersaWorks RIP Roland; - Variable data printing; - Print time and cost calculation; - New Light Black colour; White and silver ink; - Metallic Colours; Printing & Cutting; Iaedpfxsmcw Two Addsl - Four different colour compositions; EXW old price 9900 euro - new price 7900 (without VAT in EU)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Ijdpfxofdkb Uo Addsal The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Ijdpfefdkbhox Addsal Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iajdpjd Tbbdjfx Addel The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing Iajdpfeqt Dmyox Addol - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2019, operating hours: 11,169 h, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18852 Specifications: Year: 2019 Hours: approx. 11,200 Weight: ~49,000 kg Power: 310 kW Full service history (Pon Equipment) Fine cone crusher Integrated screening unit Includes screen meshes Output fractions: 0–4 mm, 4–8 mm, 8–16 mm Large feed hopper with conveyor Lights Ready for delivery Description:High-capacity Metso LT220D cone crusher with integrated screen.Compact, mobile and easy to set up – takes approx. 30 minutes after transport.Can handle: 0–160 mm material through the screen 32–160 mm material directly into the crusher Well-maintained through service agreement with Pon.Includes several screen meshes and spare parts.Ready for immediate delivery. Hours: 11169 Isdpfx Aovg A D Teddeal Own weight: 49000 Total Weight: 49000 Kw: 310 Model: Lokotrack LT220D Finknuser m/ sikt, matekasse og transportbånd

Condition: good (used), Year of construction: 2000, Offer 25523 Technical Data: - Single-sided cantilever rack consisting of 9 uprights with plug-in system - Height-adjustable storage arms - Approx. 37 storage arms - Upright height approx. 2500 mm - Width of upright + support arms approx. 1450 mm - Max. arm load approx. 500 kg - Max. support load per upright approx. 3000 kg - Axial distance between rack parts connected with diagonals approx. 0.9 m - Grid pitch for arm height adjustment 125 mm - Arm dimensions: L 1200 x W 90 x H 65 - 120 mm - Upright dimensions: W 220 x H 150 mm - Weight per upright approx. 250 kg - Weight per arm approx. 20 kg Iaedpfx Adox U S Ivedol

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: Jung Heinrich Type: Esmena Included in delivery: Pallet rack upright, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm Iaodpfx Adswbf Amsdol System perforation: 50/50 mm Incl. cross and diagonal braces, Foot plates The uprights are pre-assembled (screwed framework) Height: 9,000 mm Depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Siemens 6ES7401-2TA01-0AA0 Rack CR2 E Stand 4 , serial no. acc. to photo, used, normal signs of wear, 100% functional, scope of delivery acc. to photos Isdpei Edtxsfx Addsal

Condition: good (used), 1 x Advanced Food Technology mobile sandwich cutting machine. This machine automatically cuts sandwiches into halves and ensures a clean and centred cut on all types of sandwiches. Serial number - 0190802. Belt width - 150mm. Overall length - 2300mm. Ijdpfxoudncdj Addeal Electrical supply - 415 V / 50 hz / 3 phase. Air supply - 60 PSI / 4 Bar.

Condition: used, Year of construction: 2013, operating hours: 11,000 h, Serial number: HCMDCK50H0030xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21370 Specifications: Certified until 12/2025 2013 model Approx. 11,000 hours 122 kW Operating weight: 22,300 kg Undercarriage (see pictures) Novatron GPS Engcon tiltrotator Grading bucket S70 quick coupler Central lubrication Track width: approx. 60 cm Machine width: approx. 300 cm Extra work lights Rearview camera Air conditioning Radio/CD Description:Hitachi ZX210 crawler excavator from 2013.Delivered with grading bucket, tiltrotator, and Novatron GPS.Certified until 12/2025 and ready for immediate operation.Quick delivery available. Hours: 11000 Own weight: 22300 Ijdjxm Tc Aspfx Addeal Width: 300 Kw: 122 Model: ZX210LC-5B Beltegraver m/ tilt, skuffe og GPS.

Condition: good (used), Year of construction: 2000, Offer 25522 Single-sided long goods – Cantilever rack without contents Technical Data: Iasdpfxjx R Snue Addol - Single-sided cantilever rack consisting of 6 posts with plug-in system - Height-adjustable storage arms - Approx. 30 storage arms - Post height approx. 4000 mm - Width of post including support arms approx. 1450 mm - Max. arm load approx. 500 kg - Max. load per upright approx. 3000 kg - Axial distance of rack sections connected by bracing approx. 0.9 m - Grid spacing for arm height adjustment 125 mm - Arm dimensions: L 1200 x W 90 x H 65 – 120 mm - Upright dimensions: W 220 x H 150 mm - Weight per upright approx. 300 kg - Weight per arm approx. 20 kg

Condition: excellent (used), Technical data for the shelving system: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 820 mm Number of bays per shelf row: 01 pcs. Number of shelves: 05 pcs. The scope of delivery includes: 02x shelf uprights, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead bar and base plates The uprights are pre-assembled 2,100 mm high 400 mm deep 05x shelves, used Material color: sendzimir galvanized Dimensions: 750 x 375 x 30 mm 05x Shelf traverse, second-hand Material color: sendzimir galvanized Clear width: approx. 750 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. 04x compensation plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 01x Load plate with details of bay and compartment loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Iaodpfxjtrwa Ne Addjl Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2018, operating hours: 4,700 h, Please contact ATS Norway for more information Iasdpfsxvlgfox Addel Please provide reference number upon request: 21745 Specifications: Model year: 2018 Hours: approx. 4700 Weight: 5808 kg Power: 36.5 kW Undercarriage (see photos) Rubber tracks Track width: approx. 40 cm Machine width: approx. 200 cm S50 quick coupler Engcon tilt rotator (from 2018) Digging bucket Grading blade Central lubrication Extra lights Radio/CD Air conditioning Description:Volvo ECR58D tracked excavator from 2018 in good condition.Comes with Engcon tilt rotator and digging bucket.Additional buckets available at extra cost.Can be delivered on short notice. Hours: 4700 Own weight: 5808 Width: 200 Kw: 36,5 Model: ECR58D Beltegraver m/ tilt og skuffe

Condition: good (used), Technical data for the shelving unit: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelving rows: 01 pc. Shelf length: 1,330 mm Number of bays per shelving row: 01 pc. Number of shelves (plus ground level): 07 pcs. Scope of delivery: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. side panels Uprights are preassembled 3,200 mm high 610 mm deep 07x shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / unit: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 07x shelf crossbeams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight / unit: approx. 0.84 kg Material color: sendzimir galvanized Isdjwtdyzjpfx Addoal 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 01x load sign with information on bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If you wish to have it transported or shipped, additional costs will apply. These can be quoted separately depending on the place of delivery and scope of delivery.

Condition: used, Year of construction: 2004, operating hours: 12,270 h, Please contact ATS Norway for more information Please provide reference number upon request: 17220 Specifications: 2004 model Hours: approx. 12,500 (will increase) Iedpfx Asvgyfnsddoal Weight: 38,800 kg Undercarriage (see photos) Track width: 60 cm Digging bucket Mikrofyn GPS system (condition uncertain) Auxiliary hydraulics Additional lights Central lubrication Quick coupler Service performed by owner Ready for delivery Description:Volvo EC360 crawler excavator.The machine is sold with a digging bucket and GPS.The owner states that the machine is in working condition.Ready for delivery. Hours: 12270 Total Weight: 38800

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Polypal Included in delivery: 1x shelf connector, used for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material color: Sendzimir galvanized Drill hole diameter: 11 mm Weight: 0.250 kg | each includes: 2x screws M10 x 35 mm 2x nuts M10 2x washers M20 Your contact person in our company: Iedpfx Adowhkbzjdeal Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2000, operating hours: 11,330 h, Serial number: YF01-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20645 Specifications: 2000 model Hours: Approximately 11,330 Weight: 23,200 kg 107 kW Chassis (see pictures) Belt width: 60 cm Total width: Approx. 300 cm S70 quick release Hammer hydraulics Central grease Steelwrist Rototilt Sanding bucket Rotor lamp Isdjwp Egbjpfx Addoal Air conditioning/AC Videos Ready for delivery Description:Kobelco SK235 from 2000.The machine is sold with a rototilt and sanding bucket.Ready for delivery. Hours: 11330 Own weight: 23200 Total Weight: 23200 Width: 300 Kw: 107 Model: SK235SR Beltegraver m/ Rototilt og Pusseskuffe.

Condition: good (used), Technical data for the deep bar: Manufacturer: SSI Schäfer Included in delivery: 01x depth bar, used Material color: grey total length: approx. 1.108 mm f. depth of upright: approx. 1.100 mm clear span: approx. 999 mm crossbeam support: approx. 55 mm profile dim.: CS 190 x 75 x 13 mm material thickness: approx. 2,00 mm weight / pcs.: approx. 8,020 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Iaedpfx Adenl Dmkjdol General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Year of construction: 2014, operating hours: 1,920 h, Serial number: DE0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21682 Specifications: 2014 model Hours: Approx. 1920 Weight: 5600 kg 33.8 kW Undercarriage (see photos) 1 new rubber track Track width: 40 cm Blade Iajdpfx Adjxr Txbedol Total width: 200 cm S40 quick coupler Indexator RT20 Rototilt Cleaning bucket SMP Narrow bucket Hammer hydraulics Radio/CD Climate control/AC Service and maintenance done by dealer. Video attached Ready for delivery Notes: Engine was replaced at 100 hours, done by the dealer. Description:Eurocomach ES57 from 2014.The machine has only 1920 total hours; the engine was replaced by the dealer at 100 hours.Sold with rototilt and 2 buckets.Ready for delivery. Hours: 1920 Own weight: 5600 Width: 200 Kw: 33,8 Model: Eurocomach ES57 Beltegraver m/ Rototilt og 2 skuffer. 1920 timer.

Condition: used, Year of construction: 2013, operating hours: 3,475 h, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21450 Specifications: 2013 model Hours: approx. 3,475 Power: 33.8 kW Weight: 5,257 kg Undercarriage (see pictures) Iajdpfxoxg Acle Addjl Rubber tracks S40 quick coupler Machine width: approx. 200 cm Track width: approx. 40 cm Engcon tiltrotator Grading bucket Extra work lights Rotating beacon Dozer blade Radio/CD Air conditioning Description:Kubota KX57 tracked excavator from 2013.Delivered with grading bucket and Engcon tiltrotator.The machine has only 3,475 hours and no known issues.Available for prompt delivery. Hours: 3475 Own weight: 5257 Width: 200 Kw: 33.8 Model: KX 057-4

Condition: used, Year of construction: 2016, operating hours: 11,000 h, Serial number: HCMDDN50J0006xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19936 Specifications: Certified until: October 2025 Model year: 2016 Operating hours: Approximately 12,100 hours Power: 197 kW Weight: 31,600 kg Chassis: See pictures New chains Iaodpfsv U R U Aex Addol Leica GPS Engcon Tiltrotator S70 quick release Sanding bucket Excavator bucket Webasto Central lubrication Additional work light Rotor beam LED bar Rear camera Radio/CD Air conditioning/AC Description: Hitachi ZX300 crawler excavator from 2016. This excavator is equipped with Leica GPS, two buckets, and Engcon tilt, as well as new chains. It is certified and ready for immediate operation. The machine can be delivered at short notice. Hours: 11000 Own weight: 31600 Total Weight: 31600 Kw: 197 Model: ZX300LC-6 Beltegraver m/ 2 skuffer, tilt og GPS

Condition: used, Year of construction: 2019, operating hours: 5,630 h, Serial number: HCMDBS5XC006001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20196 Specifications: Certified to Model year: 2019 Hours: Approximately 5,630 Power: 128 kW Net weight: 20,800 kg Belt width: Approx. 60 cm Machine width: Approx. 275 cm Undercarriage: See pictures Quick release: Gjerstad S70 Buckets: Sanding bucket and digging bucket Rotor tilt Leica GPS system Central grease Ijdpewdu D Eofx Addsal Hammer hydraulics Rear view camera Additional work light Radio/CD Air conditioning / AC Description:Hitachi ZX190LC crawler excavator from 2019 with approximately 5,630 hours.The machine is delivered with both a sanding bucket and a digging bucket , a tiltrotator , and Leica GPS .The machine is equipped with central grease, hammer hydraulics and a reversing camera.Ready for delivery at short notice. Hours: 5630 Own weight: 20800 Total Weight: 20800 Width: 275 Kw: 128 Model: ZX190 LC-6