Used Rail Guide Table for sale (27,587)

Condition: new, table diameter 1200 mm table load 1,2 t swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. Crjdpjfv Aw Njfx Abwsi • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad Cjdpfxofv Aykj Abwsri turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. Crjdpfxofv Ayyo Abwei - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Cedpfxjftd T Se Abwsri Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 1000 mm Csdpfx Aogazl Uebwsri table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t Crsdpfx Aegazmksbwoi dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) Csdpfega Nh Hsx Abweri 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 2000 kg Crsdpfx Aefrzt Ajbwei 190 mm connected load frequency 400 V total power requirement 0,75 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. weight of the machine ca. 0,28 t dimensions of the machine ca. 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t Crsdomhm Auepfx Abwsi dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table diameter 350 mm table load 100 Kg Crjdpfx Abeupw Nxewsi swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, table length 1825 mm table width 660 mm stroke height 750 mm Codpsupxptefx Abwjri 20 mm weight max. in kg 450 kg weight of the machine ca. 130 Kg 2,2 x 0,85n x 0,24 m With the lifting table, medium-sized motorcycles, mopeds and scooters can be easily brought to a comfortable working height. The table is equipped with two hydraulic foot pedals. One for pumping up, one for lowering. Device for attaching the front wheel. Incl. access ramp.

Condition: used, You are purchasing an ironing system. Presse Vite ironing/steam table, with 4 height-adjustable Whirlpool hoods and 2 steam generators. Working width approx. 340 cm. 9000W Year of manufacture: 2002 Crjdpou Nyu Sofx Abwei 223-380V Pr12LP Control unit: GE VAT20 U20NOK7S You can find more items in our shop!

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm Cjdpfx Absyv I Easwori dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 102 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Cjdpfx Aboyv I Hdswori Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Codpfsyv I Hwsx Abwsri Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation Cedpfx Absyv I Insweri - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: excellent (used), functionality: fully functional, lifting height: 1,350 mm, load capacity: 1,000 kg, total length: 2,500 mm, total width: 600 mm, working height: 1,350 mm, roll diameter: 50 mm, operating pressure: 200 bar, power: 1.1 kW (1.50 HP), lifting time: 15 s, construction width: 600 mm, roll spacing: 150 mm, roll width: 550 mm, segment length: 2,500 mm, Scissor lift table, WTT Fördertechnik, Series E 10.10.5.1.0.RB, Roller conveyor length: 2500 mm Platform width: 600 mm (rollers 550 mm) Load capacity: max. 1000 kg Useful lift: max. 1350 mm Total: 7 units Sold individually Equipped with non-driven support rollers made of precision steel tube, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Installation length of the support rollers (width): 550 mm Roller conveyor height in the transfer area: 280 mm Lifting time: approx. 15 sec. Foot protection contact strips Hand-held switch on a 3 m long cable Automatic stacking protection - by slightly lifting the platform, the support rollers are automatically braked. Foldable inspection supports Built-in hydraulic unit: 1.1 kW, 200 bar Operating voltage: 400 V, 50 Hz Cedpfx Abov Acnksweri (Subject to changes and errors in the technical data, as well as prior sale)

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set Crsdpfx Ajxwzd Nobwei

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Cjdow Hnvtopfx Abwsri Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Condition: excellent (used), Set of profile sanding rails for Zimmermann profile sanding machine PS 0, or PS 0 with rasp profile Includes one reversible rail each in widths 15, 30, and 40 mm, with one straight side and one side with a radius. The rails appear practically as new, see photos. Also included: 1 box each of P80 sanding belts in widths 15, 30, and 40 mm Cedpfow Nizbex Abweri Sanding belt length: 1985 mm, suitable for Zimmermann PS0 Sale only as a complete set, no individual sales possible. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and available in our warehouse, see "other offers by this supplier."

Year of construction: 2013, condition: used, Rotary Indexing Table Rotary Table Rotary Drive Welding Positioner Positioning Table WEISS TYPE: CR700 CAA Year: 2013 Rotary indexing table/positioning table with control cabinet including frequency inverter and PILZ PLC control. Diameter of mounting plate approx.: 700 mm Diameter of inner collar approx.: 320 mm Height without base approx.: 290/320 mm Base diameter approx.: 1600 mm Base height approx.: 190 mm Max. dynamic axial force: 70,000 N Weight approx. 585 kg plus base Csdoxdv N Hjpfx Abwjri There are 4 pieces of these rotary drives from Weiss available. For further details or purchase of multiple rotary drives: Please enquire.

Condition: excellent (used), Rotary table, manufacturer: Walter Type: RT 630 MP Heidenhain digital display Resolution: degrees-minutes-seconds Clamping surface diameter: 630 mm Height in horizontal position: 180 mm Crjdpfx Aozk A U Aobwoi Height between centers in vertical position: 460 mm Motor: 400 volts, 1300 rpm Rotary table speed: 1.37 rpm Transport dimensions: Length: 1050 mm Width: 500 mm (with pallet: 800 mm) Height: 1220 mm Weight: 915 kg

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Cedsd Rawzspfx Abweri Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,99 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + Plasma Nitride" is made of through-hardened tool steel from the special alloy Siegmund X8.7 and is plasma nitrided. Surface hardness max. 850 Vickers. Cjdsd Raw Aepfx Abwori The table has a material thickness of approx. 24.5-27 mm. The holes have a diameter of 28 mm. Hole arrangement on the tabletop in a 100 mm diagonal grid, parallel hole arrangement on the sides in a 50 mm grid. Includes basic leg assembly. Accessories shown are optional. Price excludes packaging and shipping.

Condition: new, table length 1590 mm table width 1490 mm Crodpeh Dqb Defx Abwoi table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery