Used Ras for sale (68)

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms Bdsdpfoxacftjx Apvsd - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment Bdsdpfozhm Nfsx Apved • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 10345, control type: CNC control, actuation type: hydraulic, controller manufacturer: RAS, controller model: System 2005, working width: 4,040 mm, cutting angle (min.): 1 °, cutting angle (max.): 1 °, stroke rate (min.): 28 1/min, stroke rate (max.): 46 1/min, sheet thickness (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,500 kg, number of support arms: 6, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, RAS POWERcut 86.43 CNC Hydraulic Plate Shear Manufacturer: RAS Model: POWERcut 86.43 Year of manufacture: 2018 For sale is our RAS POWERcut 86.43 CNC hydraulic plate shear. The machine is currently still in our production facility and will be used sporadically until the sale. Therefore, it can be inspected and demonstrated at any time while powered on. The shear has been used exclusively in our facility and impresses with its high cutting quality and the extensive original equipment from RAS. Of particular note is the cutting angle of only 1.0°, which enables very low-distortion and clean cuts, even with thin sheets and stainless steel. Another advantage is the complete original RAS material handling system with automatic cut piece return, small parts sorting, and scrap separation. As a result, the finished cut pieces are automatically returned, and the workflow is significantly simplified. Technical data • Year of manufacture: 2018 • Cutting length: 4,040 mm Bodpfezhnz Nsx Apvjdd • Max. sheet thickness steel: 5 mm • CNC control system 2005 with LCD graphic display, softkey and window technology • CNC back gauge 5–1,250 mm • Stroke rate: 28–46 strokes/min • Cutting angle: 1.0° • Transport weight: approx. 9,500 kg Equipment • CNC control system 2005 • CNC back gauge up to 1,250 mm • Cutting line illumination • Foot switch with multiple functions • 20 hydraulic individual hold-downs • Finger guard with deep grip pockets • Built-in knives for chrome steel (stainless steel) • Base machine raised by 100 mm • 2 table extensions of 1,500 mm each • 4 additional short table plates • 33 steel ball rollers • Tilting back gauge with precision scale • Powder-coated table plates • Oil filling Material handling • Original RAS cut piece return • Small parts sorting • Scrap separation • Large parts feed-through • Movable scrap cart (side or rear) Safety • Light curtain • Protective fence on the right and left • Safety device to protect the rear of the shear The machine is well-maintained, used sporadically, and fully functional. An inspection while powered on is possible at any time by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used RAS motor-powered squaring shear, type 83.20, manufactured in 1987, serial number 46/2. Usable cutting length: 2040 mm x 3.0 mm - Manual back gauge, 500 mm - Front support with 2 tilting stops - Foot switch Bdedpfx Aszg Hq Hjpvod The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), RAS panel shear, 4m length, capable of cutting sheet metal up to 5mm thick, in good condition, with hold-down function. Bjdpfozgf Uqex Apvsdd

Condition: good (used), functionality: fully functional, Year of construction: 2000, working width: 3,200 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, back gauge adjustment: CNC-controlled, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, Very well-maintained and technically upgraded RAS 74.30 folding machine with a working length of 3200 mm. The machine has been specifically modernized and is immediately ready for production – ideal for metal construction and sheet metal processing. Technical data: Working length: 3200 mm Max. sheet thickness: 4.0 mm (steel) Year of manufacture: 2000 Power: 7.5 kW Weight: approx. 5800 kg Equipment / Highlights: Motorized backgauge with swing fingers Travel path up to 2500 mm with stop extension Refurbished power supply Upgraded control system New SD card slot New flat screen (not yet visible in the photos) Reliable, robust industrial machine Bodey A Ewmopfx Apvedd The machine runs smoothly and can be inspected under power.

Condition: good (used), Year of construction: 2001, Offer 26153 Bdjdpfx Ajzg Dhijpvjd Technical data: - max. overhang 200 mm - center distance between rollers 50 mm - max. material thickness at a tensile strength of 40 kg/mm² 1.25 mm - space requirement approx. W 300 x H 1150 x D 500 mm - weight approx. 25 kg - various beading rollers

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back stop with folding cams up to 1500 mm Several program sequences with different bending angles and stroke heights are possible Control Multibend 2000 Polished bending rail Bdsdpfxeza Ahpj Apvjd Weight: 1,700 kg

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Sheet thickness in carbon steel 2.5 mm Sheet thickness in stainless steel (700 N) 1.5 mm Rear stop up to 550 mm .....FASTI: 1020 x 2 mm Bdsdozhka Uspfx Apved

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Bjdpowq Rumefx Apvedd Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 4,060 mm, overall weight: 5,300 kg, type of input current: three-phase, FEATURES Working length: 4060 mm Working thickness: 2.5 mm Bdjdpfswb Ar Ssx Apvjd Rear table with spheres 155 additional tools to those present on the machine

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system Bdedjqzibtjpfx Apvjd

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 20000 kg Power 25 kW Bdodpfx Apsv A Tfgevsd Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual rear stop up to 550 mm Side stop and table extensions knife sharpened Bodoy Uyamspfx Apvedd 1600 kg

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Bdjdevk D Tdopfx Apvsd Sheet thickness max. 1.75 mm.

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Bdodjr Ngtfspfx Apvsd Tools recentely grounded. Bending angle preselection via potentiometer

Condition: good (used), functionality: fully functional, Data: Cutting length 1040 mm Sheet thickness in steel 2.5 mm Bdjdpfjzgigwox Apvjd Sheet thickness in stainless steel (700 N) 1.5 mm Rear stop distance up to 500 mm

Condition: used, functionality: fully functional, PROFILATRICE usata PER PIEGHE PITSBURG,NON "CE" RAS 22.07. Bjdpfx Aezh E A Dspvedd

Condition: used, Technical details: sheet width: 2004 mm plate thickness: 2,5 mm distance between columns: 2040 mm Bdodpfxoya Eq Hs Apvsd Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine xH: 2,7 x 1,3 x 2,0 m

Condition: used, machine/vehicle number: ubk., sheet width:6060 mm Bdjdpfx Apocxxuqsvjd plate thickness:2 mm total power requirement:7,5 kW weight of the machine ca.:6,75 t dimensions of the machine ca.:7,0x2,0x2,5(LxBxH) m

Condition: ready for operation (used), Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h voltage 400 V total power requirement 2x 4.0 kW weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design Bsdpfjxabz Tex Apvedd ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: used, Used RAS 62.30 Turbobend CNC Folder Used RAS 62.30 Turbobend CNC Folder Year 2014 Sheet thickness 2mm, Bodpfjfuakyjx Apvsdd Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories

Year of construction: 2000, condition: used, Used Ras Reinhardt 62.30 TURBObend Plus cnc folder for sale We had two of these Ras folders in stock, one has sold and this is the last one left in stock available for sale. Ras cnc sheet metal panel folder / Ras cnc electric motor driven folder for sale. Model: 62.30 Turbo bend plus Capacity: 3metre x 2mm Year: 2000 Back gauge: 9 powered fingers Bodpjf Ar Ihefx Apvodd Cnc graphic touch screen control: Series 5000 We are also interested in buying used Ras folders that are for sale or for part exchange, examples below: Bending machines RAS Flexibend 73.30 RAS GIGAbend 76.30 RAS We can deliver and install in your factory at additional cost with a Ras folder service engineer in mainland uk, delivery can be arranged overseas or we can load to your transport.

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. Bdedsrxt Axopfx Apved • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Bdodjrxt Hqjpfx Apvsd Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw