Used Ras 400 for sale (68)

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range Bwodpfx Ajxacftshvjp - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm Bwsdpfx Ahszhm Nfjvep • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 10345, control type: CNC control, actuation type: hydraulic, controller manufacturer: RAS, controller model: System 2005, working width: 4,040 mm, cutting angle (min.): 1 °, cutting angle (max.): 1 °, stroke rate (min.): 28 1/min, stroke rate (max.): 46 1/min, sheet thickness (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,500 kg, number of support arms: 6, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, RAS POWERcut 86.43 CNC Hydraulic Plate Shear Manufacturer: RAS Model: POWERcut 86.43 Year of manufacture: 2018 For sale is our RAS POWERcut 86.43 CNC hydraulic plate shear. The machine is currently still in our production facility and will be used sporadically until the sale. Therefore, it can be inspected and demonstrated at any time while powered on. The shear has been used exclusively in our facility and impresses with its high cutting quality and the extensive original equipment from RAS. Of particular note is the cutting angle of only 1.0°, which enables very low-distortion and clean cuts, even with thin sheets and stainless steel. Another advantage is the complete original RAS material handling system with automatic cut piece return, small parts sorting, and scrap separation. As a result, the finished cut pieces are automatically returned, and the workflow is significantly simplified. Technical data • Year of manufacture: 2018 • Cutting length: 4,040 mm • Max. sheet thickness steel: 5 mm • CNC control system 2005 with LCD graphic display, softkey and window technology • CNC back gauge 5–1,250 mm • Stroke rate: 28–46 strokes/min • Cutting angle: 1.0° • Transport weight: approx. 9,500 kg Equipment • CNC control system 2005 Bwsdpfxozhnz Ne Ahvop • CNC back gauge up to 1,250 mm • Cutting line illumination • Foot switch with multiple functions • 20 hydraulic individual hold-downs • Finger guard with deep grip pockets • Built-in knives for chrome steel (stainless steel) • Base machine raised by 100 mm • 2 table extensions of 1,500 mm each • 4 additional short table plates • 33 steel ball rollers • Tilting back gauge with precision scale • Powder-coated table plates • Oil filling Material handling • Original RAS cut piece return • Small parts sorting • Scrap separation • Large parts feed-through • Movable scrap cart (side or rear) Safety • Light curtain • Protective fence on the right and left • Safety device to protect the rear of the shear The machine is well-maintained, used sporadically, and fully functional. An inspection while powered on is possible at any time by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used RAS motor-powered squaring shear, type 83.20, manufactured in 1987, serial number 46/2. Usable cutting length: 2040 mm x 3.0 mm - Manual back gauge, 500 mm - Front support with 2 tilting stops Bwedpfx Ahezg Hq Hjvop - Foot switch The machine is in stock at our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), RAS panel shear, 4m length, capable of cutting sheet metal up to 5mm thick, in good condition, with hold-down function. Bwsdpjzgf Uqjfx Ahvjp

Condition: good (used), functionality: fully functional, Year of construction: 2000, working width: 3,200 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, back gauge adjustment: CNC-controlled, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, Very well-maintained and technically upgraded RAS 74.30 folding machine with a working length of 3200 mm. The machine has been specifically modernized and is immediately ready for production – ideal for metal construction and sheet metal processing. Technical data: Working length: 3200 mm Max. sheet thickness: 4.0 mm (steel) Year of manufacture: 2000 Power: 7.5 kW Weight: approx. 5800 kg Bedjy A Ewmspfx Ahvswp Equipment / Highlights: Motorized backgauge with swing fingers Travel path up to 2500 mm with stop extension Refurbished power supply Upgraded control system New SD card slot New flat screen (not yet visible in the photos) Reliable, robust industrial machine The machine runs smoothly and can be inspected under power.

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back stop with folding cams up to 1500 mm Bwodpfxjza Ahpo Ahvop Several program sequences with different bending angles and stroke heights are possible Control Multibend 2000 Polished bending rail Weight: 1,700 kg

Condition: good (used), Year of construction: 2001, Offer 26153 Technical data: - max. overhang 200 mm - center distance between rollers 50 mm - max. material thickness at a tensile strength of 40 kg/mm² 1.25 mm - space requirement approx. W 300 x H 1150 x D 500 mm Bwedpfxjzg Dhij Ahvjp - weight approx. 25 kg - various beading rollers

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Sheet thickness in carbon steel 2.5 mm Sheet thickness in stainless steel (700 N) 1.5 mm Bedpfszhka Ujx Ahvswp Rear stop up to 550 mm .....FASTI: 1020 x 2 mm

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Bwedpfx Asy Uyamohvop Manual rear stop up to 550 mm Side stop and table extensions knife sharpened 1600 kg

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Bodewq Rumepfx Ahvewp Upper jaw stroke 650 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 4,060 mm, overall weight: 5,300 kg, type of input current: three-phase, FEATURES Working length: 4060 mm Working thickness: 2.5 mm Bwodpfx Aswb Ar Sohvjp Rear table with spheres 155 additional tools to those present on the machine

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Bedsqzibtopfx Ahvswp Pressure 6 bar INCLUDED drag loading system

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Bedov A Tfgopfx Ahvowp Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 20000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Sheet thickness max. 1.75 mm. Bodpfx Aevk D Tdehvewp

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Bsdpfx Asr Ngtfshvjwp Tools recentely grounded. Bending angle preselection via potentiometer

Condition: used, Technical details: sheet width: 2004 mm plate thickness: 2,5 mm Bwodpfxsya Eq Hs Ahvep distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine xH: 2,7 x 1,3 x 2,0 m

Condition: used, Year of construction: 1999, actuation type: hydraulic, working width: 3,190 mm, sheet thickness steel (max.): 6 mm, back gauge: 1,000 mm, overall weight: 6,800 kg, total width: 3,830 mm, We are offering this used RAS POWERcut 86.33 hydraulic plate shear, manufactured in 1999, for sale. Manufacturer: RAS Model: POWERcut 86.33 Bjdpfezilwkox Ahvowp Year of manufacture: 1999 Condition: used Category ID: 1025 Type ID: 4196 Machine type: hydraulic plate shear - Technical specifications: Weight 6,800 kg Width: 3,830 mm Cutting length: 3,190 mm Maximum sheet thickness: steel 6 mm Back gauge depth: 5 – 1,000 mm If you have any questions or require further information, please send us a message or call us. “The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. Once the machine is available at the specified location, the buyer bears all costs and risks, including loading, transport, and customs formalities.”

Condition: used, functionality: fully functional, PROFILATRICE usata PER PIEGHE PITSBURG,NON "CE" RAS 22.07. Bodpfxjzh E A Dj Ahvjwp

Condition: used, machine/vehicle number: ubk., sheet width:6060 mm plate thickness:2 mm Bwjdpecxxuqjfx Ahvop total power requirement:7,5 kW weight of the machine ca.:6,75 t dimensions of the machine ca.:7,0x2,0x2,5(LxBxH) m

Condition: ready for operation (used), Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bwodpfx Ajxabz Tshvsp Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h voltage 400 V total power requirement 2x 4.0 kW weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: used, Used RAS 62.30 Turbobend CNC Folder Used RAS 62.30 Turbobend CNC Folder Year 2014 Bwjdpfx Ahefuakysvjp Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories

Year of construction: 2000, condition: used, Used Ras Reinhardt 62.30 TURBObend Plus cnc folder for sale We had two of these Ras folders in stock, one has sold and this is the last one left in stock available for sale. Ras cnc sheet metal panel folder / Ras cnc electric motor driven folder for sale. Model: 62.30 Turbo bend plus Capacity: 3metre x 2mm Year: 2000 Bedpfef Ar Ihex Ahvowp Back gauge: 9 powered fingers Cnc graphic touch screen control: Series 5000 We are also interested in buying used Ras folders that are for sale or for part exchange, examples below: Bending machines RAS Flexibend 73.30 RAS GIGAbend 76.30 RAS We can deliver and install in your factory at additional cost with a Ras folder service engineer in mainland uk, delivery can be arranged overseas or we can load to your transport.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge Bwsdpew T Sc Asfx Ahvjp • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Bsdpfegd Dgqjx Ahvjwp Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied