Used Remaining Stock for sale (11,887)

Condition: used, mileage: 279,000 km, power: 120 kW (163.15 HP), first registration: 05/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 516 WASKoffer /// 6-speed transmission!!!!! For export to Ukraine, including customs registration and insurance. Very good condition, immediately ready for use / vehicle has been refurbished / delivery possible for an extra charge / accident-free / ABS + ASR, ESP / 2 airbags / electric exterior mirrors / electric windows / 2x 12 V 88 Ah battery / engine preheating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light at the rear, external connection 220V / fire extinguisher / center armrest / reversing camera / reading light / radio preparation / optical signaling system / light bar & front strobe, acoustic signaling system. Our used special vehicles are inspected, refurbished, and maintained by an experienced team of service technicians from the special vehicle industry, ensuring that the vehicles are immediately ready for use. The vehicle is like new!!! We offer a 24-month warranty on this RTW!!! Financing or lease purchase possible!!! Sale without medical and technical equipment, but this can be purchased separately. Errors and prior sale excepted. Errors are possible; we only sell according to our general terms and conditions / according to § 25a / no sales tax. Lsdekkt Dqepfx Anxsag We speak Italian, English, Polish, and Spanish and can certainly help you if you are looking for a good used RTW.

Condition: used, mileage: 241,000 km, power: 140 kW (190.35 HP), first registration: 05/2016, fuel type: diesel, overall weight: 5,500 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 5, total height: 2,800 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Intensive Transport, in excellent condition Original MB AT engine installed Double partition wall to the patient area Automatic transmission VB air suspension on the rear axle Very, very good condition The vehicle is immediately ready for use Lasdjk Iyvgjpfx Anxog All service work has been newly completed Tires 100% Inspected and all necessary work has been done / put into service 2 units immediately available in stock Stryker or Ferno stretcher available at an extra cost Special equipment: Airbag on the passenger side, hill-start assist, Audio 15 audio system (radio with color display), outside temperature display, additional battery (reinforced), 1-pole battery disconnect switch, bi-xenon headlights with cornering lights, roof control unit with reading light on driver/passenger side, door entry lights, driving assistance system: lane keeping assist, rear door (opening angle 270 degrees), head airbag system (window bag), head-shoulder airbag (thorax bag) driver/passenger side, steering wheel (adjustable steering column), Becker MAP Pilot navigation system, programmable special module, smoker's package, rear view camera, acoustic reversing warning (external warning signal), interior rearview mirror, mud flaps at the rear, mud flaps at the front, stabilizer at the rear, reinforced stabilizer at the front, reinforced shock absorbers, fuel level indicator for auxiliary heater, battery disconnect relay for additional battery, fleece battery 95 Ah, reinforced front axle, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Further equipment: 3rd brake light, adaptive brake light, airbag driver side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assist, braking system with ABS+ASR, roof lining in the driver's cab, lockable glove compartment, body/structure: high-roof box van, child safety lock, fuel tank: main tank 75 liters, continuous cargo area partition, load securing/tie-down points, headlight range adjustment, model refinement, engine 3.5 liters - 140 kW CDI CAT, 7-speed automatic, wheelbase 3665 mm, tire repair kit with compressor, low emission according to emission standard Euro 6, sliding door loading/passenger compartment right, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, seats in the driver's cab: adjustable passenger seat, maintenance interval display Assyst, permissible total weight 5.50 t MB Sprinter RTW according to DIN EN1789 / DIN EN 13500 * Rear portal: work lights, reversing camera * Vehicle lights and flashing lights * Rear of the vehicle with sprung impact protection/rear step mounted * Ceiling center, patient compartment floor, design of the doors, pull-out cabinets, compressor refrigerator, hinged device holders, oxygen lines, blue light system CAN bus central electrics, lighting of the exterior storage compartments and interior lighting correspond to the usual EU design for RTW. * Each stretcher system can be adapted and installed Very, very good condition, immediately ready for use / Vehicle has been refurbished, no dents or scratches / Stretcher possible at extra cost / ABS + ASR, ESP / 2x Airbag / electric exterior mirrors / electric windows / 2x 12 V 88 AH battery / engine pre-heater / parking heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / work light at the rear, external connection 220V / f

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 360 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,080 mm, travel distance Z-axis: 360 mm, cutting speed: 200 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 3,000 kg, power: 12 kW (16.32 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 6,230 kg, total length: 8,240 mm, total width: 2,270 mm, total height: 2,340 mm, warranty duration: 12 months, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF3015H 12kW Fiber Laser Cutting Machine – Available Immediately from Stock in Germany The SENFENG SF3015H 12kW is a high-performance fiber laser cutting machine for professional sheet metal processing. With a working area of 3000 × 1500 mm, it is ideal for metal fabrication companies, industrial manufacturers, and job shops that require high cutting performance, reliable precision, and efficient production. The machine is equipped with a 12kW fiber laser source and is suitable for cutting stainless steel, structural steel, aluminum, brass, and other metal sheets. Depending on the material, gas type, and cutting requirements, it offers strong cutting performance for medium and thicker sheet metal thicknesses. The SF3015H series is designed as a high-performance platform and can be configured with laser powers up to 30kW. This makes the series suitable for companies with increasing production requirements. Your advantages: • Working area: 3000 × 1500 mm • Laser power: 12kW • Series available up to 30kW • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability: ±0.02 mm • Maximum speed: up to 200 m/min • Maximum acceleration: 2.8G • Maximum table load: 3000 kg • Machine dimensions: approx. 8440 × 2270 × 2340 mm • Fully enclosed design • Double exchange table • Heavy-duty, thermally insulated hollow bed • Intelligent spiral negative pressure extraction system • Automatic gas distribution system • CNC cutting system with process database • TÜV-CE certified Laodpfx Aswpq Drjnxeg The fully enclosed design increases operational safety. The double exchange table reduces loading and unloading times and supports a more efficient production process. The robust hollow bed and high-strength aluminum beam ensure stable operation and long-term cutting accuracy. The intelligent extraction system contributes to a cleaner production environment. The machine is currently in stock at SENFENG Germany and is available for short-term delivery. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and on-site technical service. In addition, a local spare parts warehouse is available in Germany to enable fast service support and reduce potential downtime. The SF3015H 12kW is a powerful solution for companies looking for a modern, readily available laser cutting system with TÜV-CE certification and professional local service in Germany.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU / FSCUT, laser type: fiber laser, laser source manufacturer: MAX, laser source model: MAX 6kW, laser power: 6,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 360 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,080 mm, travel distance Z-axis: 360 mm, cutting speed: 20,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 3,000 kg, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,654 kg, total length: 8,440 mm, total width: 2,270 mm, total height: 2,340 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF3015H 6kW Fiber Laser Cutting Machine – Available Immediately from Stock in Germany The SENFENG SF3015H 6kW is a powerful and efficient fiber laser cutting machine for professional sheet metal processing. With a working area of 3000 × 1500 mm, it is ideally suited for metal fabrication companies, job shops, and industrial manufacturers who require high cutting speeds, stable accuracy, and reliable production performance. The machine is equipped with a 6kW fiber laser source and is suitable for cutting stainless steel, structural steel, aluminum, brass, and other metal sheets. Depending on the material, gas type, and cutting requirements, thin to thicker sheets can be processed precisely and with clean cut quality. The H-series features a fully enclosed design and a dual shuttle table. This increases operational safety and reduces loading and unloading times. The heavy-duty, thermally insulated hollow bed ensures high stability and a long service life. The high-strength aluminum beam supports fast, dynamic movements. The intelligent spiral vacuum extraction system improves smoke extraction and contributes to a cleaner production environment. Technical highlights: • Working area: 3000 × 1500 mm • Laser power: 6kW • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 200 m/min • Maximum acceleration: 2G • Maximum table load: 3000 kg • Machine dimensions: approx. 8440 × 2270 × 2340 mm • Power supply: 3-phase 380V / 50Hz • Fully enclosed design • Dual shuttle table • Automatic gas distribution system • Intelligent CNC cutting system with process database • TÜV-CE certified The automatic auxiliary gas selection and pressure control are performed via the CNC program. This reduces manual effort and supports stable cutting quality. The intelligent, bus-based CNC system integrates motion control, laser source control, and gas control, enabling easy operation and efficient cutting. Ljdpfx Ansk R T Nmexsag The machine is currently in stock at SENFENG Germany and is available for short-term delivery. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and on-site technical service. In addition, SENFENG Germany maintains a local spare parts warehouse to enable quick service support and reduce potential downtime. The SF3015H 6kW is a strong solution for companies looking for a modern, high-performance laser cutting system with local availability, TÜV-CE certification, and professional service in Germany.

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. Ljdpfehzw Hiox Anxeag 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, mileage: 131,550 km, power: 75 kW (101.97 HP), first registration: 01/1993, fuel type: diesel, number of seats: 11, gearing type: mechanical, axle configuration: 4x2, overall weight: 5,900 kg, empty load weight: 4,285 kg, maximum load weight: 2,200 kg, emission class: none, color: silver, suspension: steel, tire size: 225/75R16C, wheelbase: 3,700 mm, driver cabin: other, Equipment: ABS, air conditioning, parking heater, Vehicle location: Bovenden, heated mirrors, air conditioning, auxiliary heating, switch 6, ABS (anti-lock braking system), leaf suspension, right side door Wheelbase: 3700 mm Body: Crew van with 11 seats, sliding door on the right and door at the rear Sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lasdpfx Ansvhktfsxjg

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Lodoyif I Uepfx Anxjag Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2t Reeving 4/1 Lsdpfsvx E Ilex Anxjag Lifting height 6m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Laodpfsvx E Ncjx Anxog Reeving 4/1 Lifting height 10m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Condition: new, Year of construction: 2026, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Ljdpfxoq Sp Evo Anxoag Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Year of construction: 2006, condition: used, Storti used modules in stock Ledpfx Ansmxfh Asxeag

Condition: used, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. Westtech Woodcracker CS545 compact grapple saw / incl. endlessly rotating tiltator / NEW unit / in stock & immediately available Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Own weight (base – full equipment) (kg): 610 – 780 Recommended oil flow main circuit (l/min): 50 – 100 Recommended oil flow auxiliary circuit (l/min): 35 – 50 Recommended operating pressure (bar): 200 - 250 Carrier vehicle operating weight (t): 8 – 15 Features: - incl. endlessly rotating tiltator - incl. automatic lubrication system for tiltator We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...), available immediately. Our warehouse has a wide selection of various products from Westtech, ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. We are happy to provide you with a financing offer upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Lasdsyi R Atspfx Anxsg We provide you with the complete range of Westtech Woodcracker products! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application in forestry Please contact Marius Herden for more information.

Condition: used, machine/vehicle number: IC1094, load capacity: 1,200 kg, fuel type: electric, mast type: other, 5222214 NO CHARGER Lodpezp Ua Uefx Anxjag

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CL140 Felling Grapple / NEW unit / in stock & immediately available - Cutting diameter softwood (mm): 180 - Cutting diameter hardwood (mm): 150 - Grapple opening (mm): 440 - Own weight (basic – fully equipped) (kg): 110 - Recommended oil flow (main circuit) (l/min): 20 – 60 - Recommended operating pressure (bar): 200 - Carrier vehicle operating weight (t): 1 – 4 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a wide selection of various Westtech products, available for immediate delivery! Mr. Herden (phone) is happy to assist you. On request, we will also be happy to provide you with a financing offer. Ljdpfx Ajyxvhnonxoag We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Moreover, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Westtech Woodcracker equipment! Errors and prior sale excepted! = More information = New: Yes Empty weight: 110 kg Suitable for: forestry applications Please contact Marius Herden for further information.

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodgripper WG1600 5-finger grapple / incl. saw unit / incl. rotator with endless rotation / NEW device / in stock & immediately available - Grapple opening (mm): 1,800 - Net weight (basic to fully equipped) (kg): 530 – 1,190 - Recommended hydraulic flow (l/min): 60 – 190 - Recommended operating pressure (bar): 100 – 300 - Carrier vehicle operating weight, rigid (t): 12 – 22 - Carrier vehicle operating weight, oscillating (t): 12 – 22 Features: - Includes endlessly rotatable tiltator with 30° mounting bracket - Includes .404" saw unit – grease-lubricated version - Electrohydraulic switching between grapple and saw unit We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) available from stock and for immediate delivery. Our warehouse contains a large selection of various Westtech products, all immediately available! Mr. Herden (phone ...) will be happy to support you. We are pleased to provide you with a financing offer on request. We are an official sales and service partner for Westtech. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Holp. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for DMS. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Subject to errors and prior sale! Laodpfeyxvhuex Anxjg = Further information = New: Yes Part suitable for: Application in forestry Contact Marius Herden for further information.

Condition: used, length 10 m width 5 m height of eaves 3 m The technical data is provided by the manufacturer or operator and is therefore non-binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. Lodpjyqvizofx Anxoag About us: More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Mixed clamp stock, seen and liked, as in the photo. Ljdpfx Aozkfvvenxeag

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3120-PRO DA-66T Specifications: - Tonnage: 2000 kN - Motor Output: 19.0 kW - Oil Tank Volume: 210 l Lajdpou T H Rrofx Anxsg - Approx. Weight: 10000.0 kg - Inside Frames: 2550 mm - Bending Length: 3100 mm - Distance between side frames: 2550 mm - Side Frame Width: 1600 mm - Bed Height: 880 mm - Daylight Opening: 530 mm - Stroke: 260 mm - Table Width: 90 mm - Throat Gap: 410 mm Speed: - Approach 150 mm/s - Working 10 mm/s - Return 130 mm/s Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - 2D and 3D graphical touch programming module - 3D visualization for simulation and processing - 17" colour TFT screen of high resolution - Full Windows operating system - Compatibility with the Modusys Delem system (modular scalability and adaptability) - External USB port - Detailed user support in a multitasking environment - Bending using the sensors in parameter adjustment menu - Profile-T3D offline software Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Manufactured in Turkey Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-66T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. Ljdovwmf Nspfx Anxsag The machine has a CE marking and EU declaration of conformity. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Manufactured in Turkey Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours - Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2106-PRO DA-69T Specifications - Nominal bending force: 600 kN - Motor power output: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5400.0 kg - Oil tank: 140 l - Maximum bending length: 2100 mm - Distance between side frames: 1600 mm - Ram width: 1580 mm - Table height: 880 mm - Daylight: 475 mm - Maximum stroke: 210 mm - Table width: 60 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-69T control - More efficient bending thanks to automatic control of 8 axes - Can store up to 500 programs, each consisting of 25 steps and 99 repetitions. - Can save up to 30 upper and lower dies. - 2D and 3D programming capability - 17-inch color TFT screen of high resolution - Windows-based software with PC programming capability - Crowning control managed by the controller - A well-integrated structure, designed by Delem to meet the highest standards. - USB port with device connectivity - Mounting port for a bending sensor - The control system and sensors prevent collisions between individual axes. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Within the service, our technicians may - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Financing Laodpfxovwmgtj Anxjg We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Manufactured in Turkey Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - Lead time: 6-8 weeks Not applicable if a machine is immediately available. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-4124-PRO DA-66T Specifications - Nominal bending force: 2400 kN - Motor power output: 22.0 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 100 mm/s - Weight: 14000.0 kg - Oil tank: 210 l - Maximum bending length: 4100 mm - Distance between side frames: 4100 mm - Ram width: 3550 mm - Table height: 1610 mm - Daylight: 530 mm - Maximum stroke: 260 mm - Table width: 90 mm - Throat depth: 410 mm Tools - Servo-driven automatic backgauge on linear guides. 2 pcs. - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram control (Y axis): Y1/Y2 independently controlled with servo drives. - Punch quick change tooling system form AMADA DA-66T control - Capable of programming in 2D and 3D - 3D visualization for preview and operation - 17-inch color TFT screen of high resolution - Full Windows operating software - Compatibility with Modusys Delem system (modular scaling and adaptability) - External USB port - Detailed user support in a multitasking environment - Sensor bending with parameter correction menu - Profile-T3D software that works offline Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Ledpfx Ajvwmkfenxeag Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Financing We assist Customers interested in financing Otinus machines in obtaining the necessary funds. We also encourage you to take advantage of our advisory services. We work with various banks to select a lease or loan offer that best suits your needs. Transport We provide free loading of purchased machines and assistance in organizing transport. Included in the price 2-day training including machine installation - 1 day to 8 hours—machine installation and training - 2 day up to 8 hours—independent work on the machine with the assistance of an Otinus technician with possibility of making specific parts used by the Customer—1 day to 8 hours Telephone consultation with an Otinus specialist—8-hour package from 7:30 a.m. to 9:00 p.m.—8-hour support package valid for 12 months. Terms of cooperation - 24-month warranty - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Customer is responsible for the machine during unloading and transport within their facility.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Electric press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty Lodpfx Anerp Dp Toxjag - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 - Motor: 11KW SIEMENS Lajdpfx Anevhcnzsxsg - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x4000 SMO-4008-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5° - Strokes/minute: 8 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total mass: 7300.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist Lsdpfx Ansiuzupexeag We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min Ledpfxophm Slj Anxsag - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0mm Structure parts - Structure type: welded - Number of supporting legs: 8 - Servo motors: Schneider - Gears and slats: bevelled - Linear guides: HIWIN - Gearboxes: Motovario - Tooth bars: YYC - Bearings: NSK - Pressure relief valves: SMC - Cooling: water cooler ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package