Used Ribbon Loom for sale (139)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, for sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003 refurbished in 2024 like new for sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003 Itedpfjv Hxq Aex Ag Nsn

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. Itjdpfx Aer Ix Igsg Non The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep Iodpfequ Uykjx Ag Netn

Condition: used, Comprehensively tested, used Kemutec 316 stainless steel ribbon blender. Manufacturer: Kemutec Material: 316 Stainless Steel Capacity: Approximately 50 Litre Capacity Mixing Trough: Approximately 540mm x 320mm x 400mm Discharge Type: Manual Plug Valve Type Of Mixer: Single Interrupted Ribbon Motor: 2.3 kW Also includes: Local controls, stainless steel hinged lid with clamps and perspex cover and stainless steel mobile frame. Click on the link below to see a video of the machine running. Itsdpfxoxnl Nqj Ag Non Specifications: Capacity: 1.8 ft³ Material of construction: 316 Stainless Steel Horsepower: 3.1 hp Dimensions: 21.26 x 12.60 x 15.75

Condition: like new (used), Butcher Boy BM1000 Ribbon blender Itedpehzbhnofx Ag Nen Stainless, 1000l ribbon blender, forward / reverse, twin discharge doors, safety guarded top, on mobile frame, 3Ph

Condition: used, Lintmenger ribbon blender Manufacturer: Morton Capacity: 500 liters Motor power: 7.5 kW, 49 rpm Itodpfjxnkk Hjx Ag Nen Material: Steel See our other advertisements VMA Wekerom

Condition: good (used), Year of construction: 1999, Used double axle Ottevanger ribbon mixer Motors 2x 11kW Rotor Itedsq Hr Nvepfx Ag Non Effective mixing capacity approx. 4000 L

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) Itodjw U Tqdopfx Ag Nsn dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled)

Condition: good (used), Year of construction: 2002, Vacuum cooker melter, ribbon blender, horizontal. For mixing and cooking under vacuum viscose products like processed cheese, pet food, standardization, etc. Double jacketed for indirect heating or cooling and direct heating by steam injection, 6 x steam injection ports. Max pressure in jacket 2 bar water or steam max 3,5 bar, CIP cleanable by 4 x spray balls. 1 outlet hatch pneumatic openable. With vacuum system, water dosing system with flow transmitter . Closed cover, pneumatic liftable, integrated liquid ring vacuum pump. Ingredient inlets: by separate elevator and standard 200 liter trolleys (elevator: KS type 602, 1,1kW - max 250 kg). Control panel with PLC (Siemens S7-300 controls), frequency converters. Display operation panel. Dimensions product room: 100 x 100 x 82 (lxwxh) cm. Documentation available. Itsdpfx Agew Uzzkj Njn

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Isdpoxgftyofx Ag Netn Discharge Type: Centre bottom discharge with manual plug type valve Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Specifications: Capacity: 200 L Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar

Condition: good (used), Gardner 800l ribbon blender Ijdjlcdz Hjpfx Ag Netn 800l ribbon blender, single shaft, stainless internals, swing top lid, discharge chute, 3Ph

Condition: used, Lintmenger ribbon blender mixer Manufacturer: Morton Capacity: 1000 liters Motor power: 11 kW, 44 rpm Material: Steel Iedpfx Agjxnkhxe Nstn See our other listings VMA Wekerom

Condition: used, Year of construction: 2017, Used Kason model RMB 1500L stainless steel ribbon blender. Manufacturer: Kason Model: RMB 1500L Material: Stainless steel Capacity: 1500 litre working capacity, approximately 2500 litre total capacity Mixing trough: 1280 mm diameter x 1970 mm long Itjdpfjxdc T Eex Ag Nsn Type of blades: Double ribbon Drive: SEW Eurodrive 7.5 kW, 50 Hz, 1468 rpm, Ex rated motor through a SEW Eurodrive Ex rated gearbox, final rpms 9.6 Also includes: - Manway hatch 500 mm diameter - (1) top inlet connection 350 mm diameter + (1) top inlet rectangular connection 610 x 160 mm - (2) bottom discharge 200 mm diameter

Condition: excellent (used), functionality: fully functional, 1 x Blendtech single shaft ribbon blender rice cooking system with side scrape. On weigh cells. Front end discharge. Dimensions of vessel approx. 900 mm wide x 900 mm deep. Ijdpfx Agovxg Awe Netn

Year of construction: 1986, condition: ready for operation (used), A Dilo needling machine including a finger feeder modernized in 2020 is available. 1) Needling machine Dilo OD 2-25, year of manufacture: 1986, working width: 2500mm, needle density: 12000 needles/m, needle boards: double board from above, stroke frequency: 1200rpm, needle bar stroke: 60mm. 2) Finger feeder Dilo CBF-25, year of manufacture: 1989, modernized/rebuilt: 2020, documentation available. On-site inspection is possible. Iedov Tnxvopfx Ag Njtn

Condition: used, Comprehensively tested, used Gardner type approximately 400 litre working capacity (product dependent) stainless steel ribbon blender. Trough measures approximately 1650mm long x 550mm wide x 700mm deep. Unit has a stainless steel lid and includes a bottom discharge valve. Specifications: Capacity: 14.1 ft³ Material of construction: stainless steel Width: 21.65" Length: 64.96" Iodpfx Agjxdw Iqs Njtn Dimensions: 64.96 x 21.65 x 27.56

Condition: excellent (used), NNP Ribbon blender Iodpfx Agotppn Ae Nstn 300Kg stainless ribbon blender, 4Kw motor, central bottom discharge door, safety mesh and lid, 3Ph

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: D60L/7967, Offer Number: D60L/7967 Machinetype: wire weaving loom Info: crimped mesh assembly loom, autom. weft wire fee Make: DEITERS Type: AWGM Ijdpfx Aowi Sy Ujg Netn Constr. year: 1978 wire diameter - automatic: 1,0-6,0 mm mesh width - automatic: 10-60 mm working width: 2.000 mm wefts per min.: 30 Location: In our warehouse

Condition: new, (made by N & N) new ! all stainless steel capacity 300 L. (= ± 10CF) 3 x 400V, 5,5kW double Ribbon mixing arm dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved adjustable speed 2 mixing directions Itjdpswm Hz Iefx Ag Non 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: spices, ingredients, powders,…

Condition: good (used), Ribbon blender, paddle mixer, mixer, agitator, turbulent mixer Itodpfswyf Ugsx Ag Nsn Interior entirely stainless steel Easy Clean system Capacity 500 liters Motor power 16.5 kW Mixing ribbon speed approx. 156 rpm Excludes motor base and belts Inlet diameter 200 mm Outlet dimensions 160 mm x 160 mm

Condition: used, Year of construction: 1991, For sale 10x Jakob Müller Frick CH MVC 150 Müdata 4 Label Loom We only sell as a set for €50,000 Each loom €5,000 1989 in 12/30mm, To: 89.30018 Müdata 4, No. 70 1990 in 12/30mm, To: 90.30452 Müdata 4, No. 71 1990 in 12/30mm, To: 90.30370 Müdata 4, No. 72 1990 in 8/46mm, To: 90.30337 Müdata 4, No.325 1991 in 12/30mm, To: 91.30247 Müdata 4, No. 73 Itodpfxsv T Nb Sj Ag Nen 1990 in 7/57mm, To: 90.30166 Müdata 4, No. 76 1990 in 7/57mm, To: 90.30461 Müdata 4, No. 77 1990 in 9/36mm, To: 90.30371 Müdata 4, No. 78 1990 in 9/36mm, To: 90.30080 Müdata 4, No. 79 1991 in 7/57mm, To: 91.30312 Müdata 4, No. 80 all looms are nice and well running

Condition: new, T63290IO - Armor Ijdpfx Ask Abhasg Netn INKANTO thermal transfer ribbon, AWR 470 wax, 90mm, black INKANTO thermal transfer ribbon, AWR 470 wax, roll width: 90mm, core: 25,4mm, length: 450m, color: black

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Itjdpfx Agswr Dhco Nsn Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: used, Year of construction: 1988, functionality: fully functional, For Sale: Several 6 pcs. Jakob Müller MVC 150s first generations are for sale: MVC 150 8/46mm 1988 88.60237 no. 309 MVC 150 8/46mm 1988 88.60085 no. 319 MVC 150 8/46mm 1988 88.60319 no. 332 Iedpfx Aev Hxlteg Netn MVC 150 10/36mm 1988 88.60041C no. 314 MVC 150 10/36mm 1988 88.60041B no. 313 MVC 150 6/66mm 1988 88.60000 no. 307 Year: 1988 Condition: well runnig and complete Price: €3,900

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 Itedpfxsr I Am Hj Ag Nen AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro