Used Ride-On Roller for sale (26,938)

Condition: used, functionality: fully functional, Total flow of clarified water through PF 1 – 5 or PF 6 – 9 is 400 m³/h. Filter diameter: 3,000 mm Nsdoxcnaujpfx Ah Sjwn Filter media - type PR 1 – 1.6 - Grain size: 1 – 1.6 mm - Bed height: 1,100 mm Operation: Maximum filter capacity: 100 m³/h Filtration rate: 14.3 m/h Backwashing: Backwash water flow: 70 m³/h Upflow velocity: 10 m/h Backwash air flow: 385 Nm³/h The PF units are divided into two sections: PF1-5 (old installation) and PF6-9 (new installation). Only one section operates at a time according to operational requirements. The overall workload is approximately balanced, so each section runs about 4,400 hours annually. The sand filters are regularly backwashed after each operational cycle (80 hours) or when the pressure loss reaches ΔP 25 kPa. The system is fully operational. PF Reconstruction: PF1-5: 10.11.2015 – complete replacement of sand, nozzles, and shell surface maintenance PF6-9: 13.7.2018 – complete replacement of sand, nozzles, and shell surface maintenance.

Condition: new, New device MASS International NS3 Speciale Angle conveyor belt with separator available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Useful width 450 mm Outside width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline PU belt black with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Nedpfx Aed Tidxsh Sjwn Coated with Super Grip Adjustable discharge chute

Condition: used, Year of construction: 1991, -1- used deflection roller/drive roller, drum length approx. 1250 mm, drum diameter approx. 800 mm, total shaft length approx. 2000 mm, shaft diameter approx. 123 mm, year not known to us. Both bearings can be turned easily. Price EXW Nedpfx Ahewqfz Uo Sewn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 661 h, Trench roller No. 4 Wacker Neuson RT 82 SC 2, built in 2012, 661 operating hours, weight 1490 kg, Kohler diesel 15.5 KW, serial no. 20140613, radio control + cable, functional Nsdpfx Ahev I T E Rj Sjwn

Condition: used, Year of construction: 1978, used manufactured by Wemhöner type W 85, built in 1978 No. 29 Nsdpfsvwfafex Ah Sown l x w x H ca. mm 2100 x 1200 x  860 about threaded spindle height adjustable chassis lateral moveable infinitely variable adjustable roll distance ca. 150 mm fence left hand located in 97447 Gerolzhofen sale in current condition

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Nwsdpfx Ahew Slcto Son Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: used, Year of construction: 2014, operating hours: 5,144 h, Single drum roller, vibration frequency 33 Hz, centrifugal force 279 kN, climbing ability 59/64%, engine DEUTZ, good condition, vehicle can be covered with advertising and/or labeled Nsdpevnnqzsfx Ah Sjwn Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Year of construction: 2021, condition: used, Width of the rolls; ±60 cm. Nsdpoxiw Nxjfx Ah Sswn Length of the inspection belt; ±275cm

Condition: used, Year of construction: 2020, operating hours: 364 h, Serial number: 23026xxxx Nwsdpfevg Nrkjx Ah Son Please contact ATS Norway for more information Please provide reference number upon request: 17559 - Certified or will be on sale - Registered in the machine register - Only 364 hours - Good tires - About. 137 cm wide - 5,375 kg - LED roof lights front and rear - Volvo engine - Owner has service history - Ready for delivery Roller ready for delivery Only 364 hours, it shows on it. Owner can document service history. Selling due to little use. Hours: 364 Own weight: 5375 Total Weight: 5375 Year controlled: Yes Width: 137 Model: SD45B

Condition: new, Year of construction: 2025, Empty weight: 2.750 kg Nsdpfxexh Haks Ah Sown 30m³ 30m³ - 6000x2300x2200mm Bottom: 5mm sides:3mm Height hook: 1450mm FRENCH DOORS RAL 7016 Article nr.: X454504040N-veiling Roll-off container SMZ 30m³ - 6000x2300x2200mm

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 43 mm, deep-drawn - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Njdpexq Rt Tjfx Ah Sswn Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: used, power: 13 kW (17.68 HP), gearing type: other, fuel type: diesel, overall weight: 1,700 kg, maximum load weight: 1,700 kg, number of seats: 1, first registration: 12/2006, Year of construction: 2006, driver cabin: other, Equipment: all wheel drive, German machine, condition see photos, more than Euro 10.000 invested, tandem vibratory roller, Ammann type AV 16-2, edge cutter, sprinkling front/rear and on the edge cutter, interval and continuous sprinkling, can be operated via the drive lever, ideal for asphalt and soil compaction, high lateral clearance for working over edges, Working width 880 mm, vibration force 14 KN-18 KN, Yannmar diesel engine, easily accessible thanks to large engine hood, 13 KW = 18 HP, low-maintenance engine, lighting, foldable roll-over protection, comfort seat with lap belt, rotating beacon prepared, clearly arranged controls, operating weight 1.580 kg, transport length 2,145 mm, transport height 2,250 mm If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Njdpsvhp S Hjfx Ah Sewn Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 500 mm, total height: 750 mm, load capacity: 80 kg, roll diameter: 50 mm, roll width: 410 mm, Easysystem Checkweigher roller conveyor with weighing unit Easysystem scale roller conveyor for sale in new condition year of manufacture: 2022 weight measurement 0-25kg /0-80/kg load cell: 4x Dini Argeo FCX C3 20KG TR display: Dini Argeo DGT1S multifunctional, digital weight transmitter/display interface: Dini Argeo Profinet 1s RS485-ProfiNET interface, for DIN-rail mounting. With UL marked PCB, terminal blocks Nodjvbdlzspfx Ah Sjwn roller conveyor length: 990mm roller width 400mm track total width: 520mm height: 730mm bearing-mounted galvanized steel rollers with belt drive

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station Nedpfepr Ut Nox Ah Sown -Discharge belt

Condition: used, Year of construction: 2019, operating hours: 1,990 h, * Hamm H13i Vio compactor with oscillation * Year of manufacture: 2019 * 1990 operating hours * 12400-15620 kg * 115KW Deutz engine, type: TCD 4.1 L4 * Air conditioning Nedpfx Ahexgk Nye Sswn * Max. working width: 2.14 m * Transport dimensions: 5.96 x 2.30 x 3.0 m * Next service in approx. 300 hours

Condition: used, Empty weight: 2.500 kg Outside dimensions: 600 x 248 x 220cm Njdexh Ei Dopfx Ah Sswn Doors left + right Need some attention. Article nr.: X454999074-veiling Used Roll-off container 600cm

Condition: used, Year of construction: 2005, operating hours: 1,127 h, Tandem vibratory roller, articulated, compaction force 24-41 kN per drum, drum width 1,000 mm, drum diameter approx. 700 mm, rollover bar. The vehicle may be covered with advertising stickers and/or lettering. Nwjdpfjw Eryyjx Ah Ssn Our offer generally does not include a new MOT (TÜV) inspection. If a new inspection is required, we will be happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, Year of construction: 2019, operating hours: 1,990 h, * Hamm HD12i VO Vio tandem roller with oscillation * Year of manufacture: 2019 * 1990 operating hours * 2570 - 3470 kg * 24 kW Kubota engine Nwjdpfx Aexgk N Tjh Son * Edge cutter wheel * NEW MODEL

Condition: new, Year of construction: 2025, Empty weight: 1.860 kg 9m³ 9m³ - 5500x2300x700mm Bottom: 4mm sides:3mm Height hook: 1450mm FRENCH DOORS SIDE FLAPS Nwsdpfsxh D Iljx Ah Ssn RAL 7016 Article nr.: X454504047N-veiling Roll-off container SMZ 9m³ - 5500x2300x700mm

Condition: new, Year of construction: 2025, Empty weight: 1.860 kg 9m³ 9m³ - 5500x2300x700mm Bottom: 4mm sides:3mm Height hook: 1450mm FRENCH DOORS SIDE FLAPS Nsdpsxh Dk Hjfx Ah Sswn RAL 7016 Article nr.: X454504046N-veiling Roll-off container SMZ 9m³ - 5500x2300x700mm

Condition: new, Year of construction: 2025, Empty weight: 2.125 kg 15m³ 15m³ - 6000x2300x1100mm Bottom: 4mm sides:3mm Nwjdpjxh Dgbjfx Ah Ssn Height hook: 1450mm FRENCH DOORS RAL 7016 Article nr.: X454504049N-veiling Roll-off container SMZ 15m³ - 6000x2300x1100mm 4/3

Condition: used, Year of construction: 2002, Empty weight: 2.500 kg Occ Afzetcontainer voor haaksysteem en kabelsysteem 440 x 250 x 115 cm. Nwsdpfexhy Uuex Ah Son Article nr.: X454999080-veiling Used Roll-off container 12m³

Condition: new, Empty weight: 2.750 kg Type number: 8712 40m³ 40m³ - 7000x2300x2400mm Bottom: 5mm sides:3mm Height hook: 1450mm Nedpfexhy Stox Ah Sewn FRENCH DOORS RAL 7016 OEM : 8712 Article nr.: X454504031N-veiling Roll-off container SMZ 40m³ - 7000x2300x2400mm

Condition: new, Year of construction: 2025, Empty weight: 1.830 kg Nwjdpfoxhy Hqsx Ah Son 10M³ 5500 X 2300 X 800 mm 10m³ Bottom: 5mm sides:3mm Height hook: 1450mm FRENCH DOORS RAL 7016 Article nr.: X454504039N-veiling Roll-off container SMZ 10m³ - 5500x2300x800mm

Condition: new, Empty weight: 2.340 kg 21m³ 21m³ - 6000x2300x1500mm Bottom: 5mm sides:3mm Height hook: 1450mm FRENCH DOORS RAL 7016 Njdpsxhy Alofx Ah Sjwn Article nr.: X454504026N-veiling Roll-off container SMZ 21m³ - 6000x2300x1500mm