Used Rivet Gun for sale (1,411)

Condition: good (used), We offer guns , cabins , complete plants , used and reconditioned Bwedpfx Aaori R Rle Nei

Condition: excellent (used), PRO XP85 MANUAL ELECTROSTATIC SPRAY GUN GRACO REF. L85T10 - Brand: GRACO - Reference: L85T10 -PRO XP85, Standard, BOQ. 1.5MM., 85KV. -Industry in general, metal, wood -Does not include hose, avaliable under demand Bodpfxsivt Rio Aa Njwi - Second-hand product that has passed a very rigorous tuning - 1 year warranty. It is in like-new condition - VAT not included

Condition: used, Side stapler for boxes with guns and introduction belt Bsdpfx Aasrwrlae Njwi

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Bsdpfx Aajw T U Ube Nswi Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Year of construction: 1990, condition: defective spare-parts repository (used), I sell the dowel inserting machine Cerisola Savona. Bodpfx Aaogzlrbs Newi Vibrations magazine and inserting head designed for 8mm dowels. Inserting gun missing ! Available immediately. 220V connection

Condition: used, Year of construction: 1988, Type: Riveting machine Bwedpoxgpftofx Aa Nji Manufacturer: ARNO Maskiner AB, Sweden Model: 1304 Year: 1988 Condition: fully working

Condition: new, functionality: fully functional, Year of construction: 2025, Powder Coating Booth + Manual Powder Coating Spray Gun Height: 250cm The number of filters is increased according to the project Advantages of the Paint Booth The use of paint booths offers many advantages to businesses High Paint Quality: Working in an environment protected from dust, dirt and other external factors results in a smoother and more aesthetic surface. Bsdpfx Aajv Nvkfs Nswi Energy Efficiency: Modern paint booths have energy-saving features. This reduces costs and provides an environmentally friendly solution. Work Safety: Employee health is protected by expelling harmful gases and particles that may occur during paint applications. Compliance: Paint booths make it easy to meet industry quality standards.

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Bodpsrtrztsfx Aa Njwi Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: used, Year of construction: 2008, power capacity / kW volt / V Bwedpfxjypwgxj Aa Nei ampere / A DRIVETECH SCHNEIDER SM-140-30370 Item no.: 18404337-004 Condition: used (functional)

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 7,690 mm, fuel type: diesel, mast type: telescopic, power: 95 kW (129.16 HP), motor manufacturer: CHANGCHAI, gearing type: automatic, battery voltage: 12 V, overall weight: 7,300 kg, empty load weight: 7,300 kg, total length: 5,670 mm, color: yellow, Equipment: cabin, pallet forks, Gunter Grossmann Telehandler GG635 Telescopic Loader Telehandler GG635 Telehandler The GG635 is an advanced telescopic loader, engineered for intensive tasks in agriculture, construction, and logistics. It combines a robust build, a precise hydraulic system, and a powerful CHANGCHAI engine, delivering reliability, high efficiency, and optimal operating comfort under demanding conditions. CHANGCHAI 4G33TC Engine – Power and Durability The GG635 is powered by an inline, four-stroke, turbocharged, water-cooled engine – the CHANGCHAI 4G33TC – with a displacement of 3.26 liters. The engine delivers 70 kW at 2400 rpm and a maximum torque of 330 Nm at 1680 rpm, ensuring dynamic and smooth performance with low fuel consumption and long component life. Hydrostatic Drive and High-Performance Hydraulic System The hydrostatic drive via cardan shaft allows precise maneuvering in difficult terrain. The axial piston pump with sensor achieves a capacity of 175 L/min at a working pressure of 280 bar, guaranteeing fast and precise operation of attachments and maximum operational efficiency. Safety and Stability Its robust construction and operating weight of 7,300 kg ensure exceptional stability under all conditions. Wet brakes and high-quality components guarantee reliability, safety, and user comfort during heavy-duty use. Maximum lift capacity: 3,500 kg Bucket capacity: 0.9 m³ Fork length: 1,200 mm Operating weight: 7,300 kg Manufacturer: CHANGCHAI Model: 4G33TC Type: Inline, water-cooled, turbocharged, four-stroke Rated power / speed: 70 kW / 2,400 rpm Max torque / speed: 330 Nm / 1,680 rpm Displacement: 3.26 L Dimensions: 715 × 660 × 795 mm Brand/Model: XCMG WA1102 / WA2102 Static axle load: 18 T Brakes: Wet brake Bwjdpfeynb H Tox Aa Nji Maximum output torque (N·m): 2,600 Brand/Model: XCMG TM043II Rated input power: 97 kW Maximum input torque: 800 Nm Maximum input speed: 3,500 rpm Drive: Hydrostatic, via cardan shaft Speed: 0–11 / 35 km/h Working pump: Axial piston pump with sensor Capacity: 175 L/min Pressure: 280 bar Fuel tank: 120 L Hydraulic oil tank: 180 L A Total length with standard bucket: 5,670 mm A Total length with pallet forks: 6,030 mm B Total length without attachment: 4,650 mm D Wheelbase: 3,005 mm F Height to top of cab: 2,373 mm J Overall working height with bucket: 7,690 mm K Maximum bucket hinge pin height: 7,000 mm L Dumping height, bucket (telescopic extended): 6,750 mm L Dumping height, forks (telescopic extended): 6,900 mm L1 Dumping height, bucket (telescopic retracted): 4,450 mm L1 Dumping height, forks (telescopic retracted): 4,610 mm M Maximum turning height (telescopic extended): 6,250 mm M1 Maximum turning height (telescopic retracted): 4,000 mm N Reach, bucket (telescopic retracted): 590 mm N1 Reach, forks (telescopic extended): 3,570 mm N2 Reach, forks (telescopic retracted): 1,020 mm O Digging depth: 29 mm P Overall height: 2,320 mm Q Track width: 2,000 mm S Ground clearance: 360 mm T Maximum turning radius with bucket: 5,571 mm T1 Maximum working radius with forks: 4,258 mm U Outside turning radius: 4,829 mm V Inner turning radius: 2,204 mm

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 1 l, color: yellow, operation weight: 3,000 kg, maximum load weight: 3,000 kg, lifting height: 4,010 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 01/2026, emission class: euro5, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, Excavators GT3000 The GT3000 excavator is a modern crawler machine designed for earthmoving operations that require an extensive working range, high breakout force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation work, installation jobs, municipal projects, and tasks in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator is fitted with a bucket offering a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN enables efficient digging, even in tougher soil conditions. A maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a large operational area, reducing the need for frequent repositioning. A maximum digging height of 4510 mm and a dumping height of 2760 mm allow easy loading of material onto transport vehicles. Dimensions and Stability The overall dimensions of the machine are 4010 mm in length, 1540 mm in width, and 2360 mm in height up to the top of the cab (1380 mm to the top of the boom). The track contact length with the ground of 1530 mm and a track gauge of 1510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow safe operation on less compacted surfaces. Mobility and Maneuverability A rear swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, enable smooth movement over uneven terrain. The sturdy undercarriage with a track length of 1895 mm guarantees good traction and safe operation. Technical specifications Operating weight: 3000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Bwjdpfxjymtfxj Aa Nsi Rated power: 14.6 kW Bucket capacity: 0.09 m³ Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Swing speed: 13 rpm Max. digging height: 4510 mm Max. dumping height: 2760 mm Max. digging depth: 2810 mm Max. reach: 4375 mm Rear swing radius: 710 mm Track contact length with ground: 1530 mm Total track length: 1895 mm Track gauge: 1510 mm Track shoe width: 250 mm Swing frame width: 1350 mm Ground pressure: 26.7 kPa Total length: 4010 mm Total width: 1540 mm Total height (to top of boom): 1380 mm Total height (to top of cab): 2360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price Bwsdpjiit Erofx Aa Noi 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: new, functionality: fully functional, power: 14.7 kW (19.99 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 2,420 kg, empty load weight: 2,420 kg, operation weight: 2,420 kg, lifting height: 4,300 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, air conditioning, cabin, hydraulics, Excavators GT3000 The GT3000 excavator is a modern tracked machine designed for earthmoving operations requiring excellent working range, high digging force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation works, installation tasks, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator features a 0.09 m³ bucket with a width of 460 mm. The bucket digging force of 17.6 kN allows for efficient excavation, even in tougher soils. The maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a wide working range without the need for frequent repositioning. A digging height of up to 4510 mm and a dumping height of 2760 mm enable easy loading of materials onto transport vehicles. Dimensions and Stability The overall machine dimensions are 4010 mm in length, 1540 mm in width, and 2360 mm in height to the top of the cab (1380 mm to the top of the boom). The track contact length of 1530 mm and a track width of 1510 mm ensure stability during operation. Track shoes with a width of 250 mm and a low ground pressure of 26.7 kPa allow safe working on less solid surfaces. Mobility and Maneuverability A tail swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and counterweight clearance of 485 mm, along with a minimum ground clearance of 255 mm, ensure smooth movement over uneven terrain. The robust undercarriage with a track length of 1895 mm provides excellent traction and safe operation. Technical Specifications Operating weight: 2420 kg Engine type: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.7 kW Rated engine speed: 2200 rpm Max. hydraulic system pressure: 18 MPa Max. gradeability: 30° Ground pressure: 35 kPa Max. travel speed: 2.5–3.5 km/h Max. tractive force: 16 kN Max. slewing speed: 11 rpm Max. digging force: 15 kN Max. digging height: 4300 mm Max. dumping height: 2530 mm Max. digging depth: 2550 mm Max. digging radius: 4150 mm Digging radius at max. height: 2700 mm Minimum radius: 1800 mm Boom length: 1950 mm Arm length: 950 mm Bucket width: 450 mm Overall length: 3950 mm Overall width: 1400 mm Overall height: 2300 mm Minimum turning radius: 790 mm Track length on ground: 1870 mm Track width: 250 mm Ground clearance: 250 mm Platform width: 1330 mm Engine hood height: 1350 mm Platform height above ground: 480 mm Bwedpeymtdnjfx Aa Nji

Condition: used, Year of construction: 2006, x-travel 4000 mm y-travel 1200 mm z-travel 1000 mm Control Heidenhain type iTNC 530 milling-head swivable +/- 90 ° spindle taper ISO 50 Bwsdjyqv Abspfx Aa Nei table surface area 4200x1000 mm Rapid movement 10.000 mm/min spindle 28 kW turning speeds 50-4000 U/min transmission ratio 2 total power requirement 70 kW weight of the machine ca. 21,4 t Head 2 axis control The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2010, plate width 900 mm Bedpfxon R Tt Uo Aa Njwi plate depth 5000 mm plate height 860 mm required space 5,0 x 0,9 x 0,1 m

Year of construction: 1998, condition: used, Heat Exchanger / Table Cooler Güntner Type S-GFH 066A/2x6L Manufacturer: Hans Güntner GmbH Type: S-GFH 066A/2x6L Bedpfx Aoyrdxmoa Nowi Year of manufacture: 1998 Permissible operating overpressure per TRB 401: 16 bar Permissible operating temperature per TRB 401: 95°C Volume in liters: 199 Fan – Type/Number: FH 065 – SDK.41.6 (ZA 121265) Net purchase price: €7,000 plus legally applicable VAT. VAT will be shown separately on our invoice. Subject to change, error and prior sale. Sale is made without warranty or guarantee, exclusively to commercial customers. Enquiries will be processed Monday to Friday from 8 am to 4 pm.

Condition: new, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 14,000 kg, table length: 5,100 mm, overall weight: 35,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW BED MILLING MACHINE HEIDENHAIN Controls and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN package: motors, measuring systems, and handwheel ICS: Internal coolant supply - 36 bar Additional equipment: Drum-type tool changer with double gripper, 24 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Bodpfxeq Ixh Ho Aa Newi 4th axis preparation (rotary table) Full machine enclosure (perimetric) Accuracies: Positioning accuracy: 0.025 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH ROTARY TABLE HEIDENHAIN Control and Motors: - HEIDENHAIN TNC 640 Digital Path Control - HEIDENHAIN 19" TFT Screen - HEIDENHAIN Package (motors, measuring systems, and handwheel) ICS: - Internal coolant supply, 36 bar Rotary Table: - 1600 x 1200 mm – twin motor drive system Additional Equipment: - Chain-type tool changer with double gripper, 40 positions - Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear - Perimetric enclosure Accuracies: Bwsdpfohy At Aex Aa Noi - Positioning accuracy: 0.015 mm - Repetition accuracy: 0.008 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, number of slots in tool magazine: 40, controller manufacturer: HEIDENHAIN, overall weight: 21,000 kg, table length: 2,100 mm, table width: 800 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 30 W, rapid traverse Z-axis: 20,000 m/min, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), table load: 2,000 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTER HEIDENHAIN Control and Motors: HEIDENHAIN TNC 7 Basic HEIDENHAIN 16" TFT display HEIDENHAIN package: motors, measuring systems and HR 510 handwheel ICS: Internal coolant supply – 20 bar Additional equipment: Preparation for 4th axis (rotary table) Full enclosure with side folding viewing windows Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Optionally, the L2000 machining center can be equipped with an SK-50 spindle interface Bwsdpfjfdxi Usx Aa Nsi Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 850 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 610 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, overall weight: 14,000 kg, controller model: TNC 7, coolant supply: 40 bar, spindle motor power: 32 W, rapid traverse Z-axis: 48,000 m/min, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rotary table diameter: 630 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, workpiece diameter (max.): 750 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW 5-AXIS SIMULTANEOUS MACHINING CENTER Bwsdpfx Ajp Nnutja Nei HEIDENHAIN Control and Motors: HEIDENHAIN TNC 7 digital path control HEIDENHAIN TFT 19" display HEIDENHAIN package: motors, measurement systems, and HR 510 handwheel Additional Equipment: Renishaw OMP 60 wireless touch probe Renishaw NC 4 laser tool control system HEIDENHAIN KKH 125 calibration sphere with KINEMATICS Full enclosure Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Only inquiries from Germany will be answered.

Condition: new, type of input current: AC, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, table length: 1,000 mm, table width: 460 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 36,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 400 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTER HEIDENHAIN Control and Motors: Bwodpfxsm Tv Sbe Aa Nji HEIDENHAIN TNC 7 Digital Control HEIDENHAIN 16" TFT Screen HEIDENHAIN Package: Motors, Measuring Systems, HR 510 Handwheel ICS: Internal Coolant Supply, 20 bar Additional Equipment: Preparation for 4th Axis (Rotary Table) Full enclosure with side folding inspection windows Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 8,500 kg, table length: 1,400 mm, table width: 600 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 17 W, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW 3-AXIS MACHINING CENTER Bwodpjvn Eqxjfx Aa Noi HEIDENHAIN control and motors: HEIDENHAIN TNC 7 digital path control HEIDENHAIN 16" TFT display HEIDENHAIN package: motors, measuring systems, handwheel HR-510 Additional equipment: Preparation for 4th axis (rotary table) Full enclosure with side-hinged viewing windows Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Bwjdpohy Au Ijfx Aa Nsi Work Table: Plate table / rotary table / pendulum machining (depending on configuration) Additional Equipment: Tool changer with double gripper, 40 stations Hinged belt chip conveyor (longitudinal) Work table per customer specification: plate table / rotary table / pendulum machining Accuracies: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW GANTRY TYPE MILLING MACHINE Control and Drive Technology: Two HEIDENHAIN TNC 640 digital CNC path controls (one at the front of the machine, one in the rear working area/in the cabin) HEIDENHAIN package: drive motors, measuring systems, and HR 510 handwheel Bwjdpfom Tv D Asx Aa Noi Additional Equipment: Chain tool changer with double gripper, 60 positions Double hinged-belt chip conveyor (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ± 0.040 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: new, BRAND NEW MACHINE HEIDENHAIN TNC 640 Digital Path Control Bwodpoq I Ncqjfx Aa Noi HEIDENHAIN TFT 19" Screen HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 1,500 mm Rotary Table: 1,600 x 1,200 mm Maximum Workpiece Weight: 6,000 kg Automatic Universal Diagonal Swivel Head 1° x 1° (Optionally with fixed quill Ø 210mm) Spindle Taper: SK-50 DIN 69871/A Max. Spindle Speed: 6,000 rpm (oil-cooled) Max. Spindle Motor Power: 53 kW ICS – Internal Coolant Supply – 36 bar Rapid Traverse X, Y, Z: 30 m/min Positioning Accuracy: 0.015 mm Repeatability: 0.010 mm Chain Tool Changer: 40 positions (vertical / horizontal change) 2 x Longitudinal Hinged Belt Chip Conveyors Perimetric Enclosure (open top) Only inquiries from Germany will be answered.