Used Roles Paternoster for sale (288)

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/20-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Dodpfx Abjxyygus Djcl Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: used, functionality: unexamined, The shuttle warehouse features multiple storage levels, allowing for fully automated storage and management of pallets. The pallets are transported into the warehouse via the existing conveyor system and assigned to their respective storage locations by the shuttle system. Dcedpfxezvc S Eo Ab Dol The multi-level design ensures optimal utilization of the available storage space. The system enables rapid and automated retrieval of pallets for dispatch, which streamlines logistics processes and reduces waiting times. The system is particularly suitable as a buffer warehouse between production, palletizing, and loading, ensuring a continuous flow of materials. Scope: • Fully automated shuttle warehouse • Multiple storage levels for Euro pallets • Infeed and outfeed technology • Associated conveyor technology • Control and system technology (where applicable) Functionality unverified, but was in use until recently. ATTENTION: Mobile, small peripheral equipment is not included in this item. Please contact us if you have any uncertainties regarding the scope before placing a bid. We strongly recommend inspecting the item! If interested, please contact us by email!

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Dodpfx Aow Dd Igsb Djcl Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, *Wemhöner Variopress Model Basic 1000 Plus/Pin – Year of manufacture 2008 *Very good condition, little used *Type KT-MB-28/15-240 *With automatic pin system and inline rotating table *2 tables with automatic Vario-Pin system *With Teflon coating for pre-glued foil *Foil laying system for pin table (pre-glued foil) *Heating plate size: 2800 x 1500 mm *Max. workpiece size: 2,540 x 1,250 mm *Membrane: Yes *Cutting station *Foil storage paternoster, 3.2 m high, with 14 hanging rods *PLC control: Siemens S7 *Operator panel for the PLC control: SIEMENS TP 270 (touchscreen) *Automatic membrane tensioning *Installed power supply: 38.5 kW *Max. chamber pressure: 6 bar *Max. press opening: 150 mm Dcodpfxjxbcude Ab Del *6 cylinders with Ø 125 mm *Operating voltage: 400V 50/60Hz *Height of the press chamber: 40 / 60 mm *Max. press force: 2400 kN *Operating pressure of the hydraulic system: 320 bar

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Budde Condition: used drive type: motorized -king shaft total length outside: ca. 1500 mm total length inside: ca. 1850 mm total width incl. motor: ca. 900 mm total width without motor: ca. 560 mm conveying width: approx. 540 mm Material: steel, plastic Color: light gray Including feet (height adjustable) and motor gear (north 0.55 KW) Discharger/ Infeed/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Dcjdpjmxf Uvsfx Ab Del Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Field of application: Mining In the realm of heavy-duty machinery, Polygonmach leads with its revolutionary mobile crushing and screening plant on wheels. This unique mobile crusher, consisting of a jaw crusher measuring 600*380mm and a second chassis equipped with the renowned Metso hp100, is designed for the toughest applications. These units aren't merely a combination of superior technology and robustness but also exhibit a deep understanding of their user's challenging requirements. With the inclusion of a Sandvik ch430, Terex, or locally equivalent cone crusher, Polygonmach stands at the apex of engineering excellence, providing highly efficient, mobile, and flexible solutions. The three-deck vibrating screen, a vital component of this mobile plant, plays an instrumental role in classifying and separating materials, ensuring you receive the highest quality output. Its seamless integration with the crushers guarantees a streamlined operation, reducing downtime and optimizing production rates. What sets this Polygonmach mobile crusher apart is its closed-circuit configuration, specifically designed for processing hard stones. Unlike conventional crusher plants, the closed-circuit system ensures precise material grading, reduced fines, and enhanced end-product quality. The inclusion of the single chassis in this design further optimizes the machine's mobility and ease of setup. The array of belt conveyors integrated into the mobile crusher system adds another dimension of flexibility to the operation. Their role in material transportation is critical to the overall efficiency and speed of the operation, ensuring continuous and uniform feed to the crusher. Technology: jaw Mobility: mobile Capacity: Min.: 60 t/h(37 lb/s)Max.: 80 t/h(49 lb/s) Motor power: 220 kW(299.12 hp) Opening height: 550 cm(216.5 in) Opening lenght: 300 cm(118.1 in) Dcedpjx Dzb Ujfx Ab Djl

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes Djdpfx Abjdqc Hwo Decl -6620x Storage bins: various sizes -771x storage bins Dimensions: 550/174/H110 mm -3483x Storage bins Dimensions: 175/135/H110 mm -2112x storage bins Dimensions: 275/175/H110 mm -30x storage boxes dimensions: 138/86/H110 mm -172x storage bins Dimensions: 174/136/H96 mm -56x storage boxes dimensions: 274/174/H96 mm -Sale: only complete

Condition: good (used), Year of construction: 2009, Megamat FSE Lift Type: FSE 7.1 2448/612-4260 Serial no.: 500002883 Year of manufacture: 2009 Unit height: approx. 4260 mm Unit width: approx. 2850 mm Unit depth: approx. 2400 mm Number of trays: 33 Tray width: approx. 2670 mm Dodsyxyxqspfx Ab Docl Tray depth: approx. 816 mm Maximum tray load: 400 kg Total load capacity: 70,000 kg Colour: beige

Condition: good (used), Lifting system, Megamat, 170 kg / tray, approx. 6 m high, – used - : Price ex location: €14,500 (net), plus dismantling, etc. Manufacturer: Megamat Model: Megalift 14448/25/6010 Year of manufacture: 2000 Max. load capacity per tray: 170 kg Max. total load capacity: 18,000 kg Dimensions per tray: approx. 2.45 m x approx. 0.80 m Number of trays: approx. 40 units Machine dimensions: Height: approx. 6.01 m Width: 2.76 m Depth: approx. 2.70 m 3/N/PE 230/400V Dcsdpfx Asyhxkmjb Djl 10A, fuse 16A Condition: good Availability: immediately Location: BG-8800 Sliven

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 434981, total height: 5,500 mm, total width: 170 mm, total length: 3,450 mm, construction height: 5,500 mm, We are offering for sale a used paternoster Electrolux Constructor, model IPN 7000. The machine is used, fully functional, with new control program. max. load capacity: 300kg Max. Max. load capacity of the lift: 6600 kg Shelf width: 2730 mm Shelf depth: 430 mm Djdpfx Aeud Ihtsb Djcl Shelf height: 370 mm Width incl. front shelf: 1700 mm Please contact us if you are interested. Price 16K€ net. I can send a video of operation.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Dcsdovphiyspfx Ab Djl Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: good (used), KARDEX SHUTTLE Type No.: XP-500-2450X13 Configuration: H/N55/N22D18B/N75D20/20 Permissible total payload: 2 x 33,200 kg 28 compartments Dsdpfozr N H Iox Ab Dscl Approximate dimensions (W x H in mm): 2,770 x 7,000

Condition: good (used), KARDEX SHUTTLE Type No.: 250-1650x825-NT Permissible load: 2 x 10,000 kg Dcodjzr N Nijpfx Ab Djl 26 compartments Compartment load: 250 kg Dimensions W x H: approx. 2.00 x 4.90 m

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, load capacity per storage section: 500 kg, empty load weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The payment period is one week after purchase of the machine! Placing a bid obliges you to collect the machine on time between 17.11.2025 and 21.11.2025! Number of pallets: 55 included, space for 74. Dcjdpfx Asxm U U Heb Dsl TECHNICAL DETAILS Load capacity per storage section: 500 kg Maximum container load: 500 kg Maximum total load: 40,000 kg Tray size: approx. 1860 x 825 mm MACHINE DETAILS Power: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 7,500 mm Weight: 5,000 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Dcedpfx Aow Rcgteb Djl Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2010, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 53 shelves, this results in a total storage area of ​​187.09 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 26,500 kg for all 53 shelves. Manufacturer: Modula Year of manufacture: 2010 Model: Modula Lift ML 50D Height: 6900 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 53 Can be shortened to 4900 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video 1 Dcsdpfx Aex Rpm Usb Djl Product video 2 Datasheet: see Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de More articles New and used items are available in our shop! International shipping costs available upon request!

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slotting Centre Machine No. M64127 Dcodpog H Inzjfx Ab Djl Year of manufacture: 09/2019 The commutator slotting centre has four machining steps. The following components are approached in the steps: Contact slitting saw Insulating grooving saw Deburrer Brush The Stäubli TS 80 robot with SP1 control has two grippers that pass the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer  Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC  More pictures via this link. Further technical data will follow shortly.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Djdpsy A Ngljfx Ab Djcl Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: good (used), Year of construction: 2004, Megamat Type: FSE 3.5 2448/816-3785 Dedpfxjytf U Ej Ab Djcl Machine no.: 35.0352 Year of manufacture: 2004 Machine height: approx. 3,785 mm Machine width: approx. 2,640 mm Machine depth: approx. 2,710 mm Number of trays: 20 Tray width: approx. 2,240 mm Tray depth: approx. 820 mm Tray height: approx. 55 mm Tray load capacity: 307 kg Total load capacity: 70,000 kg Colour: white

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm Dodpfxjrw A Eie Ab Dscl 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 1985, Megamat carousel Type: 130-225-42 Device no.: 4492 Year: 1985 Rack height: approx. 5410 mm Unit width: approx. 2670 mm Unit depth: approx. 1300 mm + 300 mm table top Dsdpfxsvc Hk Ns Ab Docl Number of shelves: 42 Shelf width: approx. 2155 mm Shelf depth: approx. 410 mm Shelf height: approx. 200 mm Shelf load: 100 kg Total load: 4,200 kg Color: beige/green

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks Dsdpszuz N Tjfx Ab Docl - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: reconditioned (used), modernized machine with new LTG control system StoreControl L External dimensions: Overall height 10,000 mm Overall width 1,600 mm Overall depth 2,680 mm 45/90 carriers, each with a payload of 250 kg in the clear internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the operating opening at 865 mm above the floor level, then 850 mm high Dedpfxervkrfj Ab Dscl Color scheme: GRAY / BLUE, carriers hot-dip galvanized Surfaces cleaned, signs of wear and minor deformations possible Performance data Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.29 kW / 400 Volt Additional extras: Lift door, manual Subject to errors, technical changes, and minor deviations in the photos Images of a similar machine Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), modernized machine with new StoreControl L control system Control system expansion optionally available 5 of the originally 6 identical machines still available External dimensions: Overall height 6,900 mm Overall width 1,580 mm Overall depth 2,680 mm 80 carriers, each with a payload of 250 kg in the clear internal dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the opening at 860 mm above floor level, then 1000 mm high Color: Gray / Dark Gray, carriers hot-dip galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive 1 x 2.2 kW / 400 Volt Dcjdpjrvkq Eofx Ab Del Horizontal drive 1 x 0.25 kW / 400 Volt Additional extras: Lift door, manually operated Subject to errors, technical changes, and minor deviations in the photos Photos of identical machines Delivery and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), modernized machines with new LTG StoreControl L control system one more machine available out of a previous total of 2 Dsdpjn D A Rrsfx Ab Djcl External dimensions: Overall height 6,000 mm Overall width 1,630 mm Overall depth 2,980 mm 30 carriers, each with a load capacity of 500 kg in the clear internal dimensions: W = 1,300 mm D = 863 mm H from 50 to 750 mm Total load capacity up to 40,000 kg Start of the operating opening at 870 mm above floor level, then 845 mm high Color: GRAY / BLUE, carriers sendzimir galvanized Surface cleaned, signs of wear possible Performance data: Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.29 kW / 400 Volt additional extras: Lift door, manually operated Subject to errors, technical changes, and minor deviations in the photos Delivery and assembly currently mainly in Germany, Austria, and other neighboring countries.