Used Rolling Machine for sale (94,460)

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • hydraulic version Rjdod Iimzepfx Ab Rjch • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: ready for operation (used), functionality: fully functional, number of rollers: 3, working width: 2,500 mm, sheet thickness steel (max.): 8 mm, Used Roundo plate rolling machine 2500x8MM, 3 rolls, fully functional Rcjdpfoxcgrvox Ab Reh

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm Rsdoxnmb Iepfx Ab Rjch hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: excellent (used), Full VWM rolling machine Redpsd S A E Nofx Ab Rsch

Condition: new, Year of construction: 2025, functionality: fully functional, conveyor belt width: 370 mm, warranty duration: 24 months, total width: 630 mm, total length: 1,670 mm, total height: 580 mm, input voltage: 230 V, table length: 600 mm, empty load weight: 79 kg, opening width: 25 mm, power: 0.37 kW (0.50 HP), New machine 24 months warranty Advantages: + Excellent price-performance ratio + Robust, compact table-top dough sheeter + Operation via push buttons and control lever for rolling direction + Suitable for rolling and laminating all types of dough + PVC conveyor belts, easy and quick to clean + Also suitable for marzipan and rolled fondant + Tables can be folded up on both sides (left and right) + No high-voltage connection required + Integrated motor and flour container + Scrapers can be removed easily without tools + Machine delivered as standard with 1 manual crank and 2 dough collecting trays Rjdpfow T Rp Usx Ab Rsch + Can be placed on almost any table (minimum required depth: 50 cm) + Fast spare parts supply within 1-2 working days Technical data: - Belt width: 350 mm - Table length: 600 mm each = 1200 mm total - Roller adjustment: from 1 mm up to 25 mm (depending on product) - Suitable for up to 1.8 kg dough - Motor power: 0.37 kW - Electrical specifications: 230V - 1Ph - 50Hz - Dimensions: --- Working position: 1310 x 630 x 500 mm (W x D x H) --- Rest position: 590 x 630 x 580 mm (W x D x H) - Net weight: 79 kg

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM year of manufacture: 2007 bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw Rodjw Ty Duopfx Ab Roch foot pedal operation. Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm weight: 300 kg high-strength rollers according to SAE 1050 certificate

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Rcedpfxsfv H Ehs Ab Reh Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: good (used), Year of construction: 2009, Fritsch Rollfix Automatic Dough Sheeter - model 600/650 - used Rcjdjxpg I Depfx Ab Reh - year of manufacture: 2009 - automatic dough rolling - automatic flour duster - computer control - machine from production line - technically inspected - collection from warehouse/shipping option available - price on request

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MH1500X13 MM 4 ROLL, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELAP, controller model: LYNX 4 AXIS, number of rollers: 4, roller (bottom) diameter: 200 mm, roller (top) diameter: 220 mm, side roll diameter: 170 mm, roller diameter: 250 mm, roller length: 1,550 mm, working width: 1,500 mm, working height: 800 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 3,300 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 1,300 mm, power: 4.05 kW (5.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL PLATE BENDING MACHINE NC 1500X 13/10MM MG SRL HYDRAULIC MODEL MH1513 MM YOM 2010 PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Technical data: Bending capacity: plate width 1500 mm thickness rolling 13 mm pre-bending 10 mm --- minimum diameter of rolling D=250 mm depending on the plate thickness and yield strength --- Rollers useful length 1550 mm Upper roll 220 mm Lower roll 200 mm Side rolls 170 mm --- Voltage 3phase 400/50 electric motor 5,5 hp on hydraulic unit --- Configuration: Rollers hardened surface high strength Rotation rollers hydraulic powered with gear units Redpsxmvhusfx Ab Rjch Pre-pinch load control upon the different plate thickness and yield plate strength Console electric commands joysticks and digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with memory up to 200 programs Front opening hydraulic drop-end & upper roll tilt-up to remove the round closed shells Speed slow/fast variable Safety installations with emergency stop. Instruction manuals for operation and service. Dimension mm 2900x1450xH1300 mm Weight 3300 Kgs

Condition: used, functionality: limited functionality, Year of construction: 2025, SHEET METAL ROLLING MACHINE W01-1.5X1300 Technical parameters Roller diameter 75 mm Rcedpfx Aoxqff Reb Roh Roller length 1300 mm Max. sheet thickness 1.5 mm Dimensions 1750x350x1100 mm WARNING !!! LAST ITEM, NEW, PACKAGING IN POOR CONDITION.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm - Automatic cycle management - Pedal operation - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available. Rcsdpoxdr Skjfx Ab Roh

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: RB3 L CNC-S, Thoman Profile Bending Machine RB 3L CNC-S – CNC-Controlled Precision Bending Machine For sale is a high-quality profile bending machine from the manufacturer Thoman – Model RB 3L CNC-S. This machine is ideal for precise bending of profiles, tubes, and flat materials in a wide variety of radii – suitable even for repeat-accurate series production, thanks to its CNC control system. Technical Data (excerpt): Manufacturer: Thoman GmbH Model: RB 3L CNC-S Control: CNC-controlled (fully automatic bending sequences can be programmed) Number of bending rolls: 3 Drive: Hydraulic / Servo (depending on configuration) Bending direction: Horizontal + Vertical Availability: available immediately Condition: used, operational, well-maintained Features: - Robust industrial-grade construction - Precise reproducibility enabled by CNC control - Specially suitable for complex bending geometries Rcsdpfow D Ruyjx Ab Reh - User-friendly control with program storage - Ideal for steel construction, metal fabrication, railing production, or contract manufacturing Including various accessories (measuring gauge, various bending rolls and spacer rings, and workshop trolley) The machine is in like-new condition. It was purchased for a project that was ultimately not realized. If interested, feel free to get in touch. Inspection possible at short notice by arrangement.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Rsdpfx Aeh A S Hteb Roch Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, overall weight: 2,550 kg, Thread rolling machine PeeWee type P20SR, used, well-maintained, low operating hours (no hour meter installed), fully functional. Can be inspected and tested under power. Forklift loading included. Includes operating manual/wiring diagram. Includes 20 sets (40 pieces) of thread rolling dies (new price per set approx. €1,100). Rcodpfxjxaline Ab Rjh

Year of construction: 1994, condition: good (used), Plate rolling machine Seroma - Expanding Pipe expansion stretcher Ø 1200 mm MACH-ID 6507 Make: Seroma Type: Expanding Year: 1994 Redpfx Abswvhwvj Rech

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Rcsdpfxjxd Ib Ie Ab Rjh Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Rolling

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm Rjdpfx Abew Nxnwj Rsch roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany

Condition: used, functionality: limited functionality, Year of construction: 2011, Manufacturer: OK MACHINE Maximum sheet length: 1500 mm Maximum sheet thickness: 3 mm Number of rollers: 3 Rcjdoxctvbopfx Ab Roh Roller diameter: 150 mm

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Rcodjuz If Nspfx Ab Rjh Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Rodpfov Uxq Sjx Ab Rech Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: good (used), 082 USED Rolling machine, croissant machine, baguette machine. Automatic machine with control panel. EXTERNAL DIMENSIONS (in cm.): - height 140 (max: 150), - width 120 - length: 195, - left wing: 84/63 - right wing: 74/64 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices Redpfxswgcwro Ab Rjch

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M50E/9046, Offer Number: M50E/9046 Machinetype: hot rolling machine Make: SKF Type: EMB 110 Constr. year: 2001/2021 diameter range: 110 mm max. outside dia. of round pieces: 110 mm Rodpfew Nxiujx Ab Rjch kind of heating: 335 KW Location: Europe

Condition: excellent (used), Year of construction: 2014, 126 USED Koenig belt dough rounder, bread rounder: model BRW 2200. Year of manufacture: 2014 EXTERNAL DIMENSIONS (in cm): - L:280, - W: 70, - H: 174 cm. - working length approx. 260 cm. EQUIPMENT: - flour duster - belt speed adjustment - belt pressure adjustment The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Redpjw Sy A Uofx Ab Roch bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M14L/6106, Offer Number: M14L/6106 Machinetype: thread rolling machine - planetary die Make: SIMA Type: RAP11 Constr. year: 1983 diameter range: 6-12 mm shaft length under head: 8-75 mm max. thread length: 75 mm output pieces/min: 1000 Location: In our warehouse Rsdpswi Tbyjfx Ab Rjch

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/6907, Offer Number: M14L/6907 Machinetype: thread rolling machine - flat die Info: vibratory feeder Rjdpjwi Ta Nsfx Ab Rech Make: MALMEDIE Type: AG13 Constr. year: 1970 diameter range: 8-16 mm shaft length under head: 150 mm max. thread length: 83 mm output pieces/min: 120 Location: In our warehouse