Used Rollix Rotary Connection for sale (14,962)

Condition: used, table diameter 630 mm weight of the machine ca. ca, 0,35 t table height 220 mm Njdpfxoymf U Es Anfswf

Condition: used, - Dimensions LxWxH: 2150x1970x2730 mm Njdpfxeytc A Hs Anfjwf - Model: LR-812-H - 2 trolleys: 800x600 - 360 baguettes - Baking surface: 19.2 m² - Refractory stone system - Power: 5 kW - Voltage: 400V - Rotating rack convection oven with integrated heat recovery and heat distribution to the interior through refractory stone walls 1- Exhaust duct 2- Convection turbine 4- Rotating mechanism 5- High-performance steam generator 6- Suction wall 7- Suspended rotating rack(s) 8- Insulation 9- Rotating tray

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Nedpex Th N Hefx Anfewf Upon request, 2 to 10 tonne load capacities available

Condition: used, No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets Nwsdpfx Anjyvqc Isfef Prices on request All dimensions are non-binding; if you require exact measurements, please inquire.

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Nedpfx Ansxabm Nefswf Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm Nwodpfx Aexabl Sjnfef table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Nwodsxaatnjpfx Anfjf Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. Nwodjxaafqspfx Anfef - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg Nodsykzhvepfx Anfowf

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Nwedpfehmi T Uex Anfjf Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: used, Year of construction: 1999, plate width 2980 mm Nodpfx Anjgxqvzjfewf plate depth 3000 mm plate height 1400 mm total power requirement 11 kW

Condition: used, table diameter 500 mm weight of the machine ca. ca. 0,2 t Nwjdpfx Aeylz D Hjnfsf table height / mm

Condition: new, Year of construction: 2023, functionality: fully functional, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines in which a powerful rotary arm combined with a reliable pre-stretch system enables precise wrapping of the pallets. This advanced technology allows the packaged goods to remain unchanged during the wrapping process. This makes rotary arm wrappers particularly suitable for pallets with light or unstable goods and for loads that are difficult to maneuver. Nwjdpfx Aor Nc Spenfof - Maximum product height: 2,000 mm - Maximum pallet dimensions: 1,200x1,200mm - Minimum weight: 45kg

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Small tenoning machine with manual feed, Stomana. The machine has undergone a complete overhaul. The electrical system is new. Warranty on the machine. Suitable for standard tenoning as well as micro-dovetail joints. Nsdjyzb Apepfx Anfewf

Condition: used, Year of construction: 2011, machine/vehicle number: JP - 0160201, Motorized welding and tilting table with height adjustment Ref. No. 26069 Technical Data: - Max. load capacity in horizontal position: 15,000 kg - Faceplate diameter: 1,800 mm - Faceplate motor-driven tiltable: 0 to 120° - Table height adjustable - Rotational movement electrically, steplessly adjustable: 0.04 to 0.80 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V / 5.5 + 7.5 kW - Minimum table height in horizontal position: approx. 1,700 mm Njdpeywtt Sefx Anfowf - Intermediate table heights in horizontal position: approx. 1,900 + 2,100 mm - Maximum table height in horizontal position: approx. 2,300 mm - Handheld remote control - Required installation space: approx. W 2,100 x H 1,700 x D 2,400 mm - Weight: approx. 8,500 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 74 h, machine/vehicle number: PC16 / P1551, Screw compactor and two 16 Cu Mtre closed skip units all manufactured to the highest specification by De Rooij in the Netherlands. All the equipment has been used inside a security shredding unit since new. It was decommissioned in 2023 and has only seen 74 hours of use since new. This equipment has been used by a bank for shredding currency and confidential wastes, and always situated inside a secure building. All in excellent condition and perfect working order. Nedpov Ilphjfx Anfswf

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Nsdpfx Ael Dn N Sonfowf Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz Nodpjh Itu Eefx Anfowf - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Year of construction: 1986, condition: used, Standard equipment Njdpsbi Uwfjfx Anfswf

Condition: good (used), Size: max 530 x 530 x 527 mm min 135 x 135 x 170 mm Product thickness: max 15 mm Cutting width: max 0-60 mm Nwodpfx Aned R Tgzsfsf Equipment: • infeed unit with degree bumbers • cutting unit • 1 st cut station RS 173/530 • 2 nd cut station RS 133/530 • bump turn 1530

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Nsdpfx Aexgq D Donfjwf Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Nodpfxewugh De Anfowf Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Year of construction: 1964, condition: excellent (used), Description to follow! Nwsdpjytg U Tefx Anfsf

Year of construction: 2020, condition: used, functionality: fully functional, The dryer is primarily used for drying sewage sludge or substrate from biogas plants. The material fed into the dryer is swirled in the drying chamber by throw shafts. Exhaust gases from a combustion engine flow around the material, causing the water to evaporate. Daily throughput is approx. 10 t. The dryer is sold complete with all ancillary components such as screw conveyors, control cabinet, auxiliary burner, acid pump, exhaust air dampers, etc. For more details, please contact us directly. Dismantling and delivery possible. The manufacturer can assist with recommissioning. Nwodeyx Iztspfx Anfsf

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Nwsdpfx Anoxbtl Tsfof Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung