Used Rotary Die Cutter for sale (10,542)

Condition: new, Table dimensions 1200 x 1200 mm table load 10000 Kg swivelling range 105 Grad turning speeds 0,07 x 0,6 U/min height adjustment 1450 - 2450 mm hollow spindle diameter mm welding current 1000 Ampere max. torque on the faceplate 20000 Nm total power requirement 12,1 kW dimensions of the machine ca. m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable Dsdpfx Aisvn Uwnjzewd • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, -KOM 3039- Offered here are four-pole Nolta rotary toggles of type 50 30222. Dwodpfx Aovw Ah Teizod Manufacturer: Nolta Available quantity: >5 pieces Type: 50 302225 Condition: New Plug pins: 3P+E Height: 87 mm Length: 285 mm Width: 90 mm Operation: rotary toggle Protection class: IP 45

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: M08L/8623, Offer Number: M08L/8623 Machinetype: 4 die - 3 blow transfer header Info: PKO Make: ESSEBI Type: RCF 36-R Constr. year: 1993 diameter range: 3,8 - 6,5 number of dies: 4 number of stations: 4 Dwedpfjwi Swmex Aized cutting length: 52 mm shaft length under head: 6-35 mm output - pieces/min: 250 press power: 55 to Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M14L/8732, Offer Number: M14L/8732 Machinetype: thread rolling machine - flat die Info: with washer assembly Make: HILGELAND Type: FN-6/60 Constr. year: 1990 Dwodpfxjwi Szxo Aizsd diameter range: 6 mm shaft length under head: 80 mm max. thread length: 62 mm output - pieces/min: 450 Location: In our warehouse

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/8328, Offer Number: M08L/8328 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off , PKO Make: ASAHI OKUMA Dwjdpfxjwi S Aio Aizod Type: RH60 Constr. year: 1988 diameter range: 8,5 mm number of dies: 2 number of stations: 4 cutting length: 55 mm shaft length under head: 55 mm output - pieces/min: 200 press power: 30 to Location: In our warehouse

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08L/8065, Offer Number: M08L/8065 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: MALMEDIE Type: K64 Constr. year: 1981 Dwedowi S I Espfx Aizjd diameter range: 16-30 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 235 mm shaft length under head: 180 mm output - pieces/min: 90 press power: 380 to Location: In our warehouse

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8822, Offer Number: M14L/8822 Machinetype: thread rolling machine - flat die Djdpfx Aowi Ti Reizewd Info: vibratory feeder Make: MENN Type: GW52 Constr. year: 1974/26 diameter range: 2,5-6 mm shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06I/9048, Offer Number: M06I/9048 Machinetype: rotating 3 - die header Make: HILGELAND Type: HC5-40A Constr. year: 1990 diameter range: 6 mm shaft length under head: 40 mm Dwjdpfxsxcxzpe Aizod max. cut-off length: 60 mm output pieces/min: 600 Location: Germany

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Djdpexc Ew Dsfx Aizjwd Dimensions: 200mm x 200mm See our other ads VMA Wekerom

Condition: excellent (used), SECO Minimaster holder MM 12-20 150.4 (28657) Slot milling cutter in case with 4 inserts MM 12-12008 RO8 P 40 Dwedpfow Iczxex Aizod

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (tel. number). DMS SG6040 sorting grapple with rotator / new unit / in stock & immediately available / incl. teeth (screw-on) Price: €7,690.00 net / €9,151.10 gross - Shell width: 400 mm - Volume: 70 L - Weight (without rotator): 195 kg - Rotator weight: 52 kg - Operating pressure: 250 bar - Closing force: 20 kN - Torque: 2,500 Nm - Opening width: 1,205 mm - Excavator class: 3.5 - 6 tons Optional: - Cutting set: €370.00 net - Pipegrip set: €990.00 net - Softgrip set: €620.00 net - MS03 adapter plate: €570.00 net - MS08 adapter plate: €910.00 net We have many other DMS grapples in stock and available immediately! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Errors and prior sale excepted! = Further information = Application: Construction Please contact Marius Herden for more information. Djdpfjyi Rz Aox Aizewd

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 4,600 mm, color: green, overall weight: 2,690 kg, first registration: 12/2024, rear tire size: 21×9 14 PLY, total width: 4,790 mm, machine/vehicle number: 9948018, Equipment: front power take-off, hydraulic folding, lighting, Machine weight*: 2690 kg (5930 lbs) Hitch: drawbar with multiple positions Cutting width: 4.60 m (15′ 1″) Working width of the machine: 4.79 m (15′ 9″) Transport width of the machine: 2.70 m (8′ 10″) Maximum working length: 4.91 m (16′ 1″) Transport length: 4.83 m (15′ 10″) Deck height: 0.23 m (9″) Transport height: 2.06 m (6′ 10″) Cutting height: 25 mm – 400 mm (1″ – 15 3/4″) Cutting overlap: 100 mm (4″) Wing working angles: 45° upwards / 15° downwards Recommended tractor power: 100 hp (75 kW) PTO speed: 1000 rpm (540 rpm optional) Gearboxes: 4 x cast iron housing Gearbox [rotor (x3)]: cast iron housing Dwsdpfx Aij Agu Ihozsd Drive shaft: 1 3/8″ Z21 or Z6 SFT 6/8 tractor end Gearbox lubricant [rotor]: 85W-140 oil Gearbox lubricant [splitter]: EP80-90W or GL-4 / GL-5 oil Oil capacity gearbox [splitter gearbox]: 2.7 liters (4.7 pints) Oil capacity gearbox [center gearboxes]: 4.3 liters (7.6 pints) Oil capacity gearbox [rotor gearboxes]: 2 x 4.3 liters (7.6 pints) Mower deck construction: Fully welded construction Deck material thickness: 6 mm (1/4″) Side skirt material thickness: 5 mm (3/16″) Skid shoe construction: Replaceable, bolted-on skid shoes Anti-scalp roller: 6 mm (1/4″) round roller with blade holder bar Standard blades: 9 x 12 mm (1/2″) 30 carbon steel, hardened and tempered. Free floating, high lift – low friction. Right- or left-hand rotation. Starcut blades: 9 x 12 mm (1/2″) 30 carbon steel, hardened and tempered. Free pivoting, high lift – low friction. Blade bolts: M24 with shank, class 8.8. Blade tip speed: 80 mps (15.748 fpm) Drivetrain: ASAE category 5 Drivetrain protection: two-way slip clutches on the rotor gearboxes. Overload on input shaft; Rear wheel mounting kits: welded tube axle; Rear wheels (x8): 21×9 14 PLY wide tires with steel rim; Front protection: single chain guards on each deck; Rear protection: single chain guards on each deck; Options: input drive shaft with 6, 21 or 8 splines / Standard, swivel eye and K80 towing eye / Set of front flaps

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 8,260 mm, color: green, overall weight: 4,800 kg, first registration: 12/2024, rear tire size: 8 x 10.0/80 x 12 – AW – 909 TL 10 PLY, total width: 8,260 mm, machine/vehicle number: 9983013, Equipment: compressed air brake, front power take-off, hydraulic folding, lighting, Machine weight*: 4800 kg (10582 lbs) Dedpfx Ae Agtpgjizowd Hitch: drawbar with multiple positions Cutting width: 8.06 m (26′ 5″) Machine working width: 8.26 m (27′ 1″) Machine transport width: 2.81 m (9′ 3″) Maximum working length: 6.33 m (20′ 9″) Transport length: 6.07 m (19′ 11″) Deck height: 0.24 m (10″) Transport height: 3.78 m (12′ 5″) Cutting height: 25 mm – 400 mm (1″ – 15 3/4″) Cutting capacity: 100 mm (4″) Wing working angles: 45° upwards / 15° downwards Recommended tractor power: 150 hp (112 kW) PTO speed: 1000 rpm Gearbox(es): 6 x cast iron housing Drive shaft: 1 3/8″ Z20 SFT 10 on the tractor side Gearbox lubricant [splitter]: EP80-90W or GL-4 / GL-5 oil Gearbox lubricant [rotor]: 85W-140 oil Oil capacity gearbox [splitter gearbox]: 2.7 liters (4.7 pints) Oil capacity gearbox [center gearboxes]: to be determined Oil capacity gearbox [rotor gearboxes]: 4 x 4.3 liters (7.6 pints) Construction of the cutting deck: Fully welded construction. Thickness of the cutting deck material: 5 mm (3/16″). Thickness of the side skirt material: 6 mm (1/4″). Construction of the skid shoes: Replaceable, bolted skid shoes; Anti-scalp plate: 6 mm (1/4″) round plate with blade holder bar; Standard blades: 15 x 12 mm (1/2″) 30 carbon tool steel, hardened and tempered. Free-swinging, high lift – low friction. Right-hand rotation. StarCut blades: 15 x 12 mm (1/2″) 30 carbon tool steel, hardened and tempered. Free-swinging, high lift – low friction. Left-hand rotation. Blade bolts: M24 with shank, class 8.8. Blade tip speed: 79 mps (15.551 fpm) Drivetrain: ASAE Category 8 Drivetrain protection: 2/4-way slip clutches on the rotor gearboxes. Freewheel on the input shaft Rear wheel mounting kits: Welded tube axles Rear wheels: 8 x 10.0/80 x 12 – AW – 909 TL 10 PLY tire with steel rim Front protection: Chain guards with loops on each deck Rear protection: Chain guards with loops on each deck Options: Drive shaft with 20, 6 or 21 splines / Swivel eye or K80 drawbar eye / Set of front flaps / Set of rear drawbar & hoses / Air brakes

Condition: used, The turntable is used for loading or unloading products, containers, and bottles. It is freestanding and has its own drive system. The rotational speed can be controlled continuously with a frequency converter. Product-contacting parts are made of stainless steel. Turntable diameter: 800mm. Djdpfj Ahk Sdox Aizswd It is freestanding and height-adjustable on dome-shaped feet. It also has a side attachment for sliding containers from a pallet onto the turntable, and side guides for sliding containers onto a conveyor belt. The power connection is about 0.35 kW 400V. YouTube Video: 

Condition: used, Machine: Rotary piston pump 10.000 ltr/h cooled Dsdpfxo Ahlp Ee Aizjwd

Condition: refurbished (used), Krämer + Grebe 200L cutter The machine is completely overhauled by us. All wear parts have been replaced on the machine. The electrics on the machine is new! Errors and prior sale reserved. Dsdsp Aub Iepfx Aizjwd All information is non-binding. The accuracy and correctness of the information contained and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: new, Year of construction: 2026, The VTLF 2.250 is a medium vacuum, dry-running displacement pump designed to operate on a continuous duty basis. It utilises self-lubricating, graphite composite vanes, requires only minimal maintenance, and requires no oil change. Dedjtty Duopfx Aizowd 100% dry-running (oil-less) operation Long vane life Continuous duty rated FEATURES 100% dry-running (oil-less) operation Quiet operation Long vane life Continuous duty rated Air-cooled Single shaft direct drive Compact design Variety of motors available BENEFITS Low operation and maintenance costs No cycling times Quiet operation – no silencer enclosures necessary Small footprint for space savings Straightforward construction for fast and easy service on-site to reduce downtime SPECIFICATIONS Volume flow 50 Hz 244 m³/h Vacuum absolute 50 Hz 200 mbar Power 50 Hz 5.5 kW Noise Level 50 Hz 77.0 dB(A) Volume flow 60 Hz 286 m³/h Vacuum absolute 60 Hz 200 mbar Power 60 Hz 6.6 kW Noise Level 60 Hz 79.0 dB(A) Weight 151.0 kg without motor

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere Dwjdpfxog Nknyo Aizjd THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2000, condition: used, Offered is a CNC die-sinking EDM machine with electrode changer. X/Y/Z axis travels: 350/250/300mm. C-axis: 360°. Control system: Charmilles CNC control. Equipped with a 4-position electrode changer (one holder defective) and various electrode holders. Low operating hours. Weight: approx. 2500kg. Inspection possible by arrangement. Dwodpo Agwqlefx Aizsd

Condition: used, Offered for sale is a paper cutting machine with mechanical cutting adjustment. Equipped with manually adjustable backgauge, handwheels, operating levers, material support table and foot control. Inspection possible by arrangement. Dedpfsz N E Uhox Aizswd

Condition: used, Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030 Serial-No. WLNS Dwodo Ahzwgjpfx Aizod Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Index Cutter Hunkeler RE 320 Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Djdpj Ahzyijfx Aizewd Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M14L/9142, Offer Number: M14L/9142 Machinetype: flat die thread rolling machine Info: with washer assembly Dodpoz Rxf Nefx Aizewd Make: TLM Type: RP10 Constr. year: 1992 diameter range: 10 mm shaft length under head: 100 mm max. thread length: 60 mm output - pieces/min: 320 Location: In our warehouse

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08L/7162, Offer Number: M08L/7162 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off Make: HILGELAND Type: CF5AZ Constr. year: 1979 diameter range: 8-16 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 160 mm shaft length under head: 130 mm output - pieces/min: 100 Location: In our warehouse Dwodpswi Tavjfx Aizsd

Condition: excellent (used), For sale is a high-quality, robust universal swivel-tilt-rotary table from the accessory inventory of a DECKEL FP4 milling machine. The table was rarely used in our workshop and is in good, well-maintained used condition. Dwodo Ah Rk Tepfx Aizjd Thanks to its versatile adjustment and swivel options, this universal work table is ideally suited for demanding milling operations in toolmaking, mechanical engineering, and single-part production. Equipment and Features: * Manufacturer: DECKEL (attribution based on origin) * Origin: DECKEL FP4 milling machine * Type: Universal swivel-tilt-rotary table * Robust, stable industrial design * Clamping surface with multiple T-slots * Angular adjustment with scales * Swivel and tilt options for different machining positions * Condition: good, rarely used * Age-related signs of wear and slight surface oxidation Condition: The table comes from our company’s machine inventory and was rarely used. Visually, it is in good condition. The adjustment mechanisms and the complete technical functionality should be checked again before the sale. Inspection and Collection: The table can be inspected at our facility by prior appointment.