Used Rotary Transfer for sale (6,200)

Condition: used, Year of construction: 1990, functionality: fully functional, total length: 13,000 mm, total width: 3,500 mm, Transverse and longitudinal transfer by chains and rollers Hnsdpfxsx U U Hne Addog

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Hnodpfxswu Uaho Addog

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg Hnodpfx Adjcp Nvyodog

Condition: new, Power harrow Remac 250 - various models, available immediately. Condition: New Hodpfjx I Ha Tjx Addjng

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with two GlobeTech tub lidding machines which worked in line with it. Hnsdpjpfdhpjfx Addog

Condition: used, Swivel stacking containers can be inserted into each other when empty. This can save up to 70% space. These containers can be stacked on top of each other - even without a lid - by turning them. When they are turned 180 degrees again, they can be nested. Manufacturer: unknown, could be Schoeller Allibert Type: unknown Year of manufacture: unknown, probably 2005 Dimensions: 59.5 cm L x 40 cm W x 32 cm H The following information is subject to change: Outside 600 x 400 x 300 Inside. 460 x 340 x 270 Stack height 285 Nesting ratio 72% With company imprint Mostly with document pocket approx. 60 pieces per pallet Hodjqqhvlspfx Addjng Weight: approx. 2kg / box Volume: approx. 50L Boxes gray: with ribbed bottom Boxes blue: with smooth bottom The blue crates often have an inlaid plywood bottom (the customer inserted this because the crates fell down during empty runs in the AKL because they were too light). However, we cannot sort the crates according to these crates. Available: immediately Condition: good, used, most of the crates are in a much better condition than in the photos! Location: D- NRW

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Hnodpjx R Dtpsfx Addog

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Hnodpfx Aew R St Njddsg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 5010 € 96.69 € Hnodpjx Urqwsfx Addeg 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, color: red, Rotoreg suitable for preparing a plot for sowing. 3-point connection category I for small tractors. Hsdpfex I E Rqsx Addong Status: New

Condition: used, Year of construction: 2011, input voltage: 400 V, input current: 32 A, type of input current: three-phase, Equipment: documentation/manual, We are offering this used robotic welding cell with 2 manual turntables, year of manufacture 2011. 1x KUKA welding robot KR 16L6 with two HDP200 manual turntables. The system is installed but no longer in use. Sale from site as seen. Type: RWS 1100 / 2×HDW Hjdjx Tab Iopfx Addsng Serial number: 09.09.594.000.000 Year of manufacture: 03/2011 Power rating: 36.8 kVA Nominal voltage: 3×400 V Nominal current: 32 A Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Used J. Engelsmann model VIRO 300-800-4571-St/FDA-konform polished stainless steel (AISI 316Ti) cylindrical rotary sifter. Cylindrical screen measures 300 mm diameter x 600 mm lenght. 3-blade rotor is driven through Ex Stöber gearbox by 3.0 kW, 400 V, 1425 rpm, 50 Hz Ex electric motor, the final rpms are 602 rpm. There is also ATEX vibro motor 0.26 kW, 400 V, 3000 rpm, 50 Hz installed above the screen to increase screening efficiency. Feeding inlet has diameter 120 mm. Discharge hopper for particals smaller than holes of the screen has pneumatical valve and diameter 300 mm. Discharge hopper for particals bigger than holes of the screen has diameter 250 mm. Mounted on stainless steel frame. Overall dimensions are approx: 2600 mm x 800 mm x 2280 mm (height), weight approx 500 kg. Hodpfxsx Ryucj Addong

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Hjdoxr Dh Hspfx Addong

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, Table size: 3250 x 1500 mm Column distance: 3350 / 1200 mm Hnedpfex Sv Nxjx Addjg Ram length/width: 3250 x 1500 mm Feed: 1000 mm Closing stroke: 300 mm Ram stroke: 200 mm Pass-through direction: left - right Distance from lower tool to upper edge of press table: 450 mm Table profile center section: 100 x 100 mm Table profile end sections: 100 x 100 mm Table inside distance max.: 1000 mm min.: 400 mm Maximum transport weight: 100 kg Max. strokes: 32 strokes/min. Press force: 4100 kN

Condition: new, neu Hodox Urqqopfx Addeng ca. 2 - 4 Wochen ab Auftr Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: good (used), Rotary tray sealer in lovely condition. Choice of tooling sizes available Hsdpju Nn Rnefx Addjng

Year of construction: 2019, operating hours: 1,920 h, condition: good (used), fuel type: diesel, Toro Groundmaster 7210 Rotary Mower / Park Mower / Lawnmower 183CM Wide Kubota Diesel 2019 Ongoing stock, see website. Hnedpfxjx Hirve Addsg Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition with no warranties. (see our general terms and conditions) For a viewing and/or test drive, you are welcome to make a no-obligation appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2018, functionality: fully functional, Aerzen Delta Hybrid Rotary Lobe Compressor D98S Characteristics: Suction pressure 1.013 bar Final pressure 1,913 bar Hedpfx Ajvyrvlsddsng Power 132 kW Voltage 500 V

Condition: used, Deckel transfer table swivel table No. 2231 For Deckel milling machine FP 3 Hnjdpfx Aevu R Nmjddog

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Hnedpfx Aow R Syioddeg

Condition: new, Year of construction: 2025, neu 2025 020156 prompt, Zwischenverkauf v Türkei 6720 € 129.7 € 1 250 kg 205 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm 1000 mm 700 mm 1700 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. Hnodpfxox Urqks Addjg For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) INCL. FOLLOWING OPTION: Pneumatic centering attachement

Condition: good (used), Year of construction: 2018, functionality: fully functional, Aerzen Delta Hybrid Rotary Lobe Compressor D98S Hnodpfx Aevyruheddog Characteristics: Suction pressure 1.013 bar Discarge pressure 1,913 bar Power 132 kW Voltage 500 V

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 Hodpowqx H Rsfx Addong For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 24400 € 468.48 € Hjdpfx Aex Urqdeddong 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW Hnsdpfex Urpmsx Addsg 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement