Used Rotating Laser for sale (10,599)

Condition: used, Year of construction: 2017, Sieving machine- 2017 Mobile Concept Laser QM Powder With Siemens PLC Powder Handling Unit - Hedpsz N H Atefx Andonu

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland. Hjdpfxszt A H Rs Andjnu

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Hodpfxjz Eu Syj Andsnu Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 6,000 mm, cutting speed: 8,500 mm/min, workpiece weight (max.): 200 kg, input voltage: 380 V, input frequency: 50 Hz, overall weight: 4,500 kg, total length: 11,380 mm, total width: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, fume extraction, nozzle changer, safety light barrier, 2 Chuck Professional Pipe Laser Cutting Machine Max length of pipe: 6000mm*φ240mm Repeat positioning accuracy: ≤0.03mm Positioning accuracy: ≤0.05mm Max positioning speed: 85m/min Max acceleration: 1.0G Max rotating speed of chuck: 100r/min Round pipe: Φ10mm-Φ220mm Square pipe: 10mm*10mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm High-quality chuck 1)High clamping accuracy; 2)Sealed and dustproof; 3)Various types of pipes can be clamped; Hnsdpfx Aev Hkmvsndju 4)Low failure rate; High-strength cage structure welded bed, high temperature annealing, gantry milling processing, anti-vibration, anti-torsion and anti-deformation; Professional industrial computer, resistant to high temperature and dust; Dust removal Hollow rear chuck, dust is removed from the inside of the pipe, the dust removal effect is good, meet the requirements of environmental protection; Short tail function Support two kinds of short tail functions: rear chuck inserted short tail, front chuck movable short tail; Ensure that workpieces & pipes can achieve short tails, reducing material waste.

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Air Pressure: 6 bar Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Hodpfx Ajz R D Dqjndjnu Composite Body Pallet Changer Various Nozzles Protective Lenses Additional Accessories

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Hnodpfevcbrhsx Andju Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 25 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,400 mm, total height: 2,000 mm, total length: 1,500 mm, working range: 280 mm, height adjustment type: electric, scan area length: 280 mm, scan area width: 280 mm, travel distance X-axis: 600 mm, travel distance Z-axis: 400 mm, table length: 1,000 mm, table width: 1,000 mm, space requirement width: 1,400 mm, space requirement height: 2,000 mm, laser wavelength: 1,070 nm, space requirement length: 1,500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 280 mm, Equipment: cabin, Automated Fiber Laser System with SK-LASER Workstation and Rotary Table for Series Production. Laser Class 1 · CE · Made in Germany System: - Complete system: fiber laser + workstation + rotary table - 2 processing positions with partition wall (400 mm) - Operator protection via light curtain - 2-cycle operation, 180° rotation Equipment: - Workstation XXL: W 1,400 × H 2,000 × D 1,500 mm - Option: High-speed scan head Superscan Rotary Table & Axes: - Rotary table Ø 1,000 mm, 25 mm hole grid - Automatic production cycle - 2 × Z-axis 400 mm, 1 × X-axis 600 mm - Ball screw drive, load capacity up to 25 kg Laser – IPG: - 50 W, 1.0 mJ - 50–250 kHz, 100 ns - 1060–1070 nm, M² < 1.2 - Air-cooled, < 400 W Optics: - F-Theta f = 420 mm - Field approx. 280 × 280 mm - Pilot laser + distance laser Hsdpfxsyil Dvs Andenu Control System: - Windows 11 Pro, SSD, 23" monitor - Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR/DM, serial numbers, material parameters Workstation: - Seated/standing workstation - Extraction nozzle DN50 - Emergency stop, dual-channel interlock, safety relay Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Hnedpoyfucvofx Andou Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Max. acceleration: 1.0G Max. rotating speed of chuck: 110r/min Machine weight: 10T Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Hnsdpevrwt Tjfx Andeu Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator Hjdpfx Ajzyzzyondonu RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! Hsdpfx Asz N Dutsndsnu The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source Hjdjz D D N Espfx Andjnu MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 250 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, total height: 2,700 mm, working range: 175 mm, height adjustment type: mechanical, scan area length: 175 mm, scan area width: 175 mm, table length: 1,200 mm, table width: 1,200 mm, space requirement height: 2,700 mm, laser wavelength: 1,064 nm, working height: 500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, IPG Fiber Laser Type M · Laser Class 1 · Made in Germany XXL Workstation – Custom Construction: - Standing workstation with table height designed for standing operation - Folding sliding door, right side fully glazed with safety glass, class LK 1 - Bright work light - Stainless steel suction nozzle DN50 - Heavy-duty drawer system: up to 250 kg, internal dimensions 1.2 × 1.2 m Hsdpfjyimz Ajx Andjnu - External position: for loading/unloading - Internal position: for laser operation - Programmable auto-start, magnetic switch as interlock - Slots on both sides for extra-long parts, beam protection brush - Roof height for parts up to 500 mm under 254 mm lens - Z-axis manual, base value storable - Machine external height: approx. 2.50 – 2.70 m Laser – IPG MOPA: - Diode-pumped ytterbium fiber laser - Power: 20 W - Pulse duration adjustable (also for plastics) - Wavelength: 1064 nm - Pilot laser + 2 distance lasers (650 nm,

Condition: used, functionality: fully functional, Year of construction: 2016, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-2000-CUT, laser power: 2,000 W, input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: cooling unit, We are offering this used IPG Laser YLS-2000-CUT. Hjdpozhcvnsfx Andenu Model name: YLS-2000-CUT Serial number: 16126751 Rated voltage: 400-460 V AC 3P/PE Frequency: 50/60 Hz Rated current at full load: 15.2 A Fuses: 20/120 A/kA Drawing number: G25-16-130212-7 Date of manufacture: December 2016 with the corresponding water chiller: IPG chiller Model LC 71.01-A.4.5/6 Date of manufacture: 2018 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) Hnsdpfx Aoyim S Iendeu - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser Hodpfoyfvhgox Andenu - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: ready for operation (used), Year of construction: 2008, laser power: 115,000 W, number of axes: 3, CO2 laser cutting machine manufactured in 2008. This SEI Laser Paper Blaster 02 features a sealed CO₂ laser with a nominal power of 115 W, designed for paper and cardboard processing. It includes an automatic sheet feeder with a maximum stack height of 350 mm and an integrated conveyor system for efficient operation. If you are looking to get high-quality cutting, marking, and engraving capabilities, consider the SEI Laser Paper Blaster 02 machine we have for sale. Contact us for further details. Laser system • Wavelength: ~10.6 µm • Scanning head: 3-axis galvanometric system • Axes: X/Y via scanning mirrors; Z with dynamic focusing (per optical setup) • Working field: Approx. 200 × 200 to 500 × 500 mm • Processing modes: Cutting, marking, engraving, micro-perforation • Adjustable parameters: Laser power, frequency, processing speedPaper handling • Feeding: Automatic sheet feeder with stack loader • Max stack height: 350 mm • Paper weight range: 120–300 g/m² Hnjdsz Hbyyspfx Andou • Operation: Fully automatic cycle • Transport: Integrated conveyor system • Output: Automatic sheet discharge and collectionControl and software • Control: PC-basedSafety and extraction • Enclosed laser processing area • Interlocked access doors • Laser safety shutters • Emergency-stop devices • Fume extraction connections (external unit required)Electrical data • Supply voltage: 230 V AC, single phase with neutral and PE • Frequency: 50/60 Hz • Machine nameplate power: 200 W • Machine nameplate current: 1 A

Condition: used, Year of construction: 2022, machine/vehicle number: 01, General description The item for sale is an industrial laser marking machine by Solutions SK, model LM9 (designation FD060). The machine is from the 2022 production year and represents a complete solution for precise marking of parts, enclosed in a safe, free-standing housing. Hnodez R Eiujpfx Andou Technical data and specifications Manufacturer: Solutions SK Laser Machine model: Laser LM9 / LM9/B3 Designation / ID: FD060 Serial number: 01 Date of manufacture: 07.2022 (Code: 22-07-00) Control interface: Industrial SIEMENS SIMATIC HMI TOUCH touchscreen panel Operating panel: Equipped with hardware buttons for START, RESET, STOP, a switch for working light (SVETLO), and a main emergency stop switch (NÚDZOVÉ ZASTAVENIE).

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Hnedpfjyimpasx Andsu Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: used, LVD PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Hodpfx Aezwgg Njndonu Model MFMC-12000 , Laser Power 12 KW.

Condition: new, Year of construction: 2025, functionality: fully functional, laser wavelength: 1,064 nm, AL-IN 300 W, laser welding machine, demonstration unit, like new, 1-year warranty, mounted on the original pallet, partially still packaged. Additional demo units available on request. Sales only within the EU. - X, Y, Z axes powered, operable via joystick and semi-automatic mode - User coordinate system (UCS) – automatic Z-axis guidance for welding on inclined planes Accessories: Hnjdpjpcf Ntefx Andou Tilting/swiveling optics Ergonomic wedge for optimal working position Multi-function foot switch Angled base with table plate for ALT-base C Beam deflection unit, swiveling 110° L/R, including 12V External cooling (unregulated) Laser welding consumables, Lawitex starter kit. As a laser welding wire manufacturer, we can create a custom wire selection for your specific requirements. Welding parameters will be personally explained, saved, and made easily retrievable for you. We supply genuine Alpha Laser spare parts and offer application/product training as well as service at attractive conditions. We are the official sales partner for Alpha Laser laser welding systems. With almost 30 years of experience in welding technology, we offer advanced laser welding technology from a single source. Inquiries, explanations, welding training, and instruction (also by phone) are available in German, English, and Polish. Supplier Lawitex GmbH 40764 Langenfeld (Rheinland), Germany

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction Hnedpfsyctfdjx Andsu - 23" monitor, keyboard & mouse Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum Hnodpfx Ajd N Hgujndeu operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 12,000 W, working length: 2,030 mm, working width: 4,020 mm, power: 12,000 kW (16,315.44 HP), type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, X-Axis Travel(mm）: 2050 Hnedpfx Aswxaq Tendou Y-Axis Travel(mm）: 4050 Z-Axis Travel(mm) ：270 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 170m/min Maximum Acceleration: 2.5G

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Hnodowwzudepfx Andju Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!