Used Rowena Meat Saw for sale (7,455)

Condition: ready for operation (used), functionality: fully functional, Fatosa Frozen Meat Slicer, Frozen Blok Cutter Guodozmp Rpepfx Ad Rei Sold on behalf of a customer – functioning machine, sold as is, without warranty, no returns.

Year of construction: 2013, condition: good (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Gujdpfx Adjzu A N Io Rei Special design of the carriage for maximum cutting precision; Water collection tray with integrated water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2001, turning speeds 15/30 U/min saw blade diameter max. Ø 370 mm Vice opening 180 mm Gujdpfj Agpgxox Ad Rsi capacity 90 degrees: round 120 mm capacity 90 degrees: square 100x100 mm capacity 90 degrees: flat 180x100 mm 105 mm 100x100 mm 130x100 mm 120 mm 100x100 mm 130x100 mm weight of the machine ca. 400 kg dimensions of the machine ca. 1100x900x1850 mm

Condition: as good as new (ex-display), Year of construction: 2025, Panhans bandsaw BSB 500 Upper and lower APA II bandsaw guides Tilting table top up to 45° Door locking system via limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 hp 400 Volt motor with motor brake Band speed 1,290 m/min Maximum cutting height 320 mm Maximum cutting width 485 mm Maximum blade length 4,145 mm Table size 500x680 mm Table height 890 mm Dust extraction port 2x100mm Gjdpfsdq D I Hex Ad Roui Space requirement: 900x525x1925 mm Weight 220 kg CE compliant, GS tested Available in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts Guedpev Erkajfx Ad Roi T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: excellent (used), CATALOGUE NUMBER 7901 Gjdpszul Aksfx Ad Reui Technical specifications: - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from moving backward) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth sliding rollers, metal - from below: - guide strip - ejectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 22kW - brake - diameter of the dust extraction nozzle 200mm - overall dimensions L/W/H 2300x1370x1570mm - weight approximately 1700kg ADVANTAGES - Made in Italy - Very good condition - DTR documentation - Used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number 7807 TECHNICAL DATA - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table dimensions 1900x790mm - height from base to table 830mm - top - 2 rows of pawls/ejectors - 2 smooth, metal feed rollers - saw arbour - 2 feed rollers, pressure rollers - bottom - guide strip - pawls/ejectors - track - electric height adjustment of the machine body Gsdpjzwwvzjfx Ad Reui - central lubrication - stepless speed adjustment via frequency inverter - feed motor 4kW - main motor 75kW - dust extraction nozzle diameter 2x150mm - overall dimensions L/W/H 2050x1800x1800mm - weight approximately 3500kg ADVANTAGES - German-made - DTR documentation available - used multi-blade saw - very good condition Net price: 58900 PLN Net price: 13700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8056 TECHNICAL DATA - max. blade diameter: 350mm - blade bore diameter: 30mm - blade guard - cutting height for a 300mm blade: 90mm - max. cutting width: 640mm - ability to cut at an angle in the vertical plane, by moving the arm or the blade - arm rotation: right/left - motor: 400V, 3kW - table dimensions: 1000x800mm - dust extraction port diameter: 50mm - dimensions (L/W/H): 1800x1100x1510mm - weight: 185kg ADVANTAGES – Made in Italy – DTR documentation available – Very good condition – Used saw Godpjznkz Eofx Ad Reui Net price: 7500 PLN Net price: 1744 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm Gsdpfxjztzc Dj Ad Reui - spindle diameter: 30mm - blade guard - hydraulic blade feed - cutting height: 140mm - main motor: 4.4kW - table dimensions (length/width): 570x870mm - table height from base: 750mm - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Code: 0516 Brand: OMS SALVARANI - ITALY Model: FC 300 R SUPER - CE Standard Gusdpfo Ah H Iaox Ad Roi Cut-off saw with dust extraction base for cutting frames, wooden and aluminium profiles, joinery, furniture, fittings, Pvc, plastics and various other materials – CE Standard Technical specifications: Blade diameter mm 300 Hole 30 Revolutions per minute rpm 2800 Three-phase motor power 2,5 Hp Cutting capacity 110 x 140 mm Base with dust extraction system Overall dimensions mm 800 x 600 x 1,400 h Weight kg 80

Condition: excellent (used), Panel Beam Saw - With Automatic rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Gedjzxn Ecopfx Ad Rjui Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Guedjz Ehvxjpfx Ad Rsi

Condition: used, Cutting length: 3000 mm Cutting height: adjustable, 0 - 45 mm Saw unit: 1.8 kW Guedpoy Hrzajfx Ad Rsi Clamping mechanism: operated via handwheel Location: Nattheim

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Guedezn N Ikepfx Ad Rsi

Condition: used, Max. saw blade diameter: 450 mm Motor power: 7.5 kW Max. cutting width: 800 mm Carriage length: 5000 mm Saw blade bore: 30 mm Control panel: located at the bottom of the machine housing Height adjustment: hydraulic, via foot lever Swivel adjustment: hydraulic, via foot lever Swivel angle indicator: scale Guodpe Af Nu Dofx Ad Rji Cutting width indicator: scale Maximum cut length on the crosscut fence: 3200 mm Crosscut fence indicator: scale Crosscut fence design: fixed 90° PSV safety guard: Yes Location: Nattheim

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), cutting height (max.): 335 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30,135 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 1,900 mm, total length: 2,350 mm, total width: 1,450 mm, overall weight: 1,320 kg, table height: 750 mm, Equipment: documentation/manual, MEBA 335 DG double miter bandsaw (semi-automatic) incl. powered chip brush, micro-dosing system, and clamping force adjustment Description: Offered is a MEBAeco 335 DG, a semi-automatic double miter bandsaw manufactured in Germany (MEBA, Westerheim). It is the proven solution for precise miter cuts in workshops and production environments. The machine is robust, easy to operate, and offers excellent value for money. Cutting range: 90°: round Ø 335 mm / flat 500 x 335 mm 45° right: round Ø 330 mm / flat 320 x 335 mm 45° left: round Ø 305 mm / flat 305 x 335 mm Technical data: Saw band: 4400 x 34 x 1.1 mm Working height: 750 mm Digital miter display with 0.1° resolution Patented MEBA miter system: the pivot point remains the same for every angle, thus ensuring exact length measurement Electric saw feed with ball screw spindle Hydraulic material clamping over the entire stroke Guodpfe Ai D Dpsx Ad Roi Semi-automatic sawing cycle with the steps: clamping, sawing, and return to the pre-set height Additional equipment included in the offered price: Powered stationary chip brush: reliable band cleaning for longer saw band life Micro-dosing system (minimum quantity lubrication): clean cut without coolant emulsion, dry chips, less cleaning effort Clamping force adjustment: material-friendly clamping, even with thin-walled profiles and tubes Mounting elements: for stable and low-vibration installation Price: MSRP 37,915 € / special price 31,500 € net plus VAT, ex works For further information, a demonstration, or a customized offer, I am at your disposal.

Condition: excellent (used), CATALOGUE NUMBER 8026 TECHNICAL DATA Guedpfxszw Dkfo Ad Rei - max. cutting length 3100 mm - max. cutting height 80 mm - max. cutting width 570 mm - main saw motor power 10 kW - blade diameter 450 mm - work table height 850 mm - work table width 660 mm - dust extraction nozzle diameter 1x160 mm, 1x170 mm - overall dimensions (length/width/height) 5500x2100x1600 mm - weight approximately 2500 kg ADVANTAGES – for trimming boards – used saw, very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: - track width 400mm - working width of the roller 400mm - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm Gusdpfszx Rqhsx Ad Rsi - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES – Made in Italy – New track and slides – Very good condition – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8151 Technical specifications: - max. blade diameter 800mm - spindle diameter 30mm - hydraulic clamping system also functions as a blade guard - hydraulic blade stroke - max. cutting width 700mm - max. cutting height (at the center) 250mm - max. cutting height (full width) 150mm - main motor 11kW Godpfe Aiubpsx Ad Roui - diameter of dust extraction nozzles 2x130mm - table dimensions 640x1000mm - table height from the base 900mm - roller tables 2 pcs - roller dimension 590mm table dimensions: - length/width 2040x650mm - length/width 1740x650mm - machine dimensions length/width/height 1200x1000x1430mm - total weight 600kg ADVANTAGES – 2 roller tables – hydraulically adjustable blade – used saw, very good condition Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Paul resawing and multi-blade circular saw BM 160. Cutting height 160 mm. Throughfeed width 750 mm. Reinforced hydraulic feed, infinitely adjustable from 0 - 85 m/min. Roller pressure amplification. Triple anti-kickback device. Saw arbor 550 NSP. Safety device. 45 kW motor mounted. Electrical control cabinet. Has been out of operation for several years. Gujdpfx Ao Aitk Sod Rei

Condition: good (used), Saw blade diameter: 1310 mm Gjdpfx Adj Ait Aqs Rjui Cutting diameter: 440 mm Machine weight: approx. 7.5 tons

Condition: used, Year of construction: 2017, Behringer LPS 60-T - Vertical metal bandsaw - Year of manufacture: 2017 - Operating hours of the saw drive: 32441 h - Rigid saw frame in C-design, minimizing torsion and vibration Godpfx Ajz H Ac Asd Rsui - Robust gearbox with appropriate gear ratio and drive with higher power (saw drive 5.5 kW / band speed 10-110 m/min) - Designed for saw blades with the dimensions 54 x 1.6 mm, primarily for cutting difficult-to-machine materials and larger dimensions - 2 saw blade wheels with wear-resistant running surface - Combined roller and hydraulically pre-tensioned carbide sliding guide for the saw blade - Hydraulically controlled saw blade tension, electrically monitored with automatic pressure reduction when the machine is at a standstill - Automatic shutdown in case of saw blade breakage - Saw blade drive with frequency converter - By opening the door, the blade change can be carried out effortlessly and without tools by one person. Blade change time approx. 2 minutes - Saw blade cleaning by rotating double brush Ø100 mm - Cutting deviation for normally machinable materials within 0.1 mm per 100 mm cutting height - Heavy-duty, torsion-resistant machine stand in box design - Chip conveyor with separate electric drive - Hydraulic system designed in a block construction - The material support table is mounted on linear guides and can be moved via servo drive Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (including base pan) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or band tension pressure: 85 bar - Quantity of coolant: approx. 100 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - coolant pump: 0.15 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current draw: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: new, Year of construction: 2026, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless Gjdpfx Ajw D T Dksd Rsui T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Gsdpozhx A Refx Ad Rjui Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1999, STRIEBIG III TRK scoring unit In wooden box Can be retrofitted to a Striebig Standard TRK Location: from stock 54634 Bitburg Gujdpsvluwvsfx Ad Rei - available immediately -