Used Veneer Saw for sale (6,240)

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. Ljdpfxjzwh Rce Aazort This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Lrsdpoz Akftsfx Aazst Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: used, functionality: fully functional, cutting length (max.): 3,015 mm, saw blade diameter: 180 mm, USED VENEER SAW FOR SALE IN USED CONDITION! Ledpjzlhmaofx Aazjrt

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Maximum cutting length: 3050 mm. Equipped with a rear finger stop. Lrsdpfozlqbajx Aazet

Condition: excellent (used), Working width: 300 cm Cutting height: 4 cm Pneumatic clamp 1.8 kW motor Ljdpozvn Dgjfx Aazert

Condition: used, Year of construction: 1999, Max. cutting length: 4200 mm Max. cutting height: 45 mm Max. cutting depth: 515 mm Saw blade diameter: 180 mm Clamping beam movement: pneumatic Fencing system: Fence indicator: Dust extraction channel: Yes Dust extraction: external dust extraction Feed type: manual Dadoing unit: with diamond-tipped saw blade (secondary cut) Machine type: stationary Weight approx.: 950 kg Dimensions: 5400 x 1180 x 160 mm Motor power: 2.2 kW Dust extraction diameter: 80 mm Storage location: Nattheim Lredpfjzvzicex Aazjt

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1524/1, Ludy machinery for cutting veneer and producing veneer edging. Suitable for the precise cutting of veneer into strips and for preparing edging for furniture manufacturing. Robust construction, simple operation, ideal for production environments. Ljdpfx Aozg Dpasazjrt

Condition: used, Year of construction: 1982, Second-hand machine Condition: good Features and technical specifications: Cutting length (mm): 3,100 Cutting height (mm): 45 Saw blade diameter (mm): 180 Depth to stop (mm): 500 Main motor: 1.8 kW Pneumatic clamp Rear stop Lsdpfx Aaszk Nvtozjrt Weight approx. kg: 400 Location: Flörsheim Availability: at short notice

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Lrodpfxsyku U Ne Aazst machine weight ab. 500 kg

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Lrsdewq D Tpepfx Aazot Price 2800.-

Condition: used, Used machine Lodpfx Aaezyyzxozjrt Equipment and technical data:

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a professional, heavy-duty band resaw (slitting saw) from the renowned Italian manufacturer CENTAURO S.p.A., model SUPERCUT 80. The machine was manufactured in 2014 and comes from a line of technologically advanced saws designed for extremely precise cutting of wood into thin strips and veneers. Thanks to its robust construction and high frame rigidity, it guarantees perfect cutting geometry while maintaining high performance. Full technical specifications (from the nameplate): Manufacturer: CENTAURO S.p.A. (Italy) Model: SUPERCUT 80 Year of manufacture: 2014 Main motor power: 15 kW (approx. 20 HP) – ensures stable operation even with hard exotic wood species and oak. Wheel speed: 680 rpm Diameter of cast iron wheels: 800 mm Lrjdpfx Ajzti T Roazjt Certificate: CE (full documentation and compliance with safety standards)

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit Ledpfeyizztsx Aazjrt max. cutting length 3050 mm no rear stop included

Condition: good (used), Year of construction: 1997, cutting length (max.): 3,100 mm, Veneer saw with saw blade and disc instead of a planing unit. It first saws, and then instead of planing, it mills with a disc (the milling cutters are mounted on the side of a disc). Ledpfx Aaszcc I Uezjrt Maximum cutting length: 3100 mm. Equipped with a rear support and finger stop.

Condition: excellent (used), 2.2 kW motor Ledpfx Aezu Nfijazjrt Cutting length: 300 cm Cutting height: 3.5 cm Manual clamp Table length: 300 cm Table width: 60 cm

Condition: excellent (used), Working length 300 cm, pneumatic clamp, motor 1.65 kW Lredpfxjygxgbe Aazet

Condition: good (used), Year of construction: 1979, Veneer saw with planing unit Max. cutting length 3100 mm Functionally tested Ledpfxewimduj Aazjrt

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Ljdpfsvwf Agox Aazert

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Veneer saw Cutting length: 4000 mm Front and rear support tables Extraction duct Ljdpfx Aeyh It Rsazjrt

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Lrjdpoq Rb Irofx Aazjt cutting length 3100 mm with rear fence

Condition: used, functionality: fully functional, cutting length (max.): 3,500 mm, cutting height (max.): 40 mm, type of input current: three-phase, saw blade diameter: 180 mm, – very good condition TECHNICAL SPECIFICATIONS: – cutting length: 3500 mm – cutting height: 40 mm – cutting width on the right side: 960 mm – saw motor: 3 kW – milling cutter motor: 1.5 kW – feed motor: 0.75 kW Lrodpfx Aajw I Efgszst – stepless cutting speed adjustment – blade diameter: 180 mm – cutter diameter: 70 mm – extraction port diameter: 100 mm – upper pressure beam – automatic milling cutter approach – possibility of manual or automatic cutting – overall dimensions (L/W/H): 530 / 205 / 130 cm – weight: ~ 800 kg

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1999 Features and Technical Specifications: - For cutting all types of veneer Lodpfszlbtyox Aazsrt - Tight joints and tear-free - Cutting length: 3020 mm - Opening height: 60 mm - Cutting height: 45 mm - Motor: 1.8 kW - Saw blade speed: 8700 rpm - Saw blade diameter: 180 x 16 mm - Includes a planing unit that can be coupled with or decoupled from the sawing unit - Horizontally and vertically adjustable - Joining blade head 85 x 50 mm, with 4 reversible blades - Front support table is adjustable (ball-bush guide) - With front support table and dust duct - Sliding stop from the front via position indicator - Veneer clamping via pressure beam using two external pneumatic cylinders - Rear support table with recessed measuring tapes and stop rail - Dimensions: 4780 x 1560 x 1290 mm - Weight: 520 kg Availability: Immediate Location: 63934 Röllbach

Condition: used, machine/vehicle number: 650597, Motor: 1.65 kW Cutting length: approx. 2450 mm Saw blade diameter: approx. 150 mm Pneumatic blade tensioning Space requirement: approx. L x W x H mm 3000 x 1000 x 1600 Ex works, from Seevetal location, subject to prior sale, Sold as is, without transport. Lsdpfx Ajimd D Ajazjrt

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Lsdew U D U Hepfx Aazjrt

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Lredpfx Aasr I E Hcezst dimensions 4000 x 500 x 920 mm weight 450 kg