Used Rudnick Enners for sale (15)

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm Kjdpfxsza Eipj Acpodu - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse - reverse gear - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) – reverse gear – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Kdsdpfx Acjxa Drhopou Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Chain conveyors from dryer Vibration separator

Condition: excellent (used), Catalog number: 7975 TECHNICAL DATA Kjdpfx Aszr Iwfjcpsdu - inlet width: 450mm - inlet height: 250mm - roller width: 530mm - blade length: 530mm - number of blades: 2 pcs - screen dimensions: 50x50mm - 2 toothed lower drive rollers - lower roller motor: approx. 2.2kW - toothed upper drive roller - upper roller motor: approx. 2.2kW - conveyor belt - conveyor belt length: 6500mm - conveyor belt width: 400mm - main motor: 37kW - conveyor belt motor: 0.37kW - automatic reversing (adjustable) - overall machine dimensions (L/W/H): 2400x1300x1100mm - overall conveyor belt dimensions (L/W/H): 6600x610x550mm - weight: approx. 2500kg – German production – automatic reversing (adjustable) – protects the machine from blocking and damage in case of overload – with a 6500mm conveyor belt – used shredder, very good condition Net price: 115900 PLN Net price: 26950 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Kdodpfxjzq Sqgo Acpsu Weight: approx. 3,500 kg Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, power: 132 kW (179.47 HP), Drum chipper, Rudnik & Enners. Type TH 250-300/650/5 Kdsdpsy R Nblsfx Acpju Drive motor 132 kW Infeed height 300 mm Lower infeed rollers: 3 pcs. Upper infeed rollers: 2 pcs. Including vibrating screen, 8 m long, with drive, overhauled; 1 screen, 7.5 m long, and 1 screen, 10 m long, not overhauled. Metal detector. The machine has been out of service since 2014 and has been completely overhauled. Ready for immediate use. Control system available.

Condition: used, total height: 3,270 mm, total length: 2,700 mm, total width: 2,250 mm, Colour: Green Weight: 4.000 kg Kdedpfoz Rz E Sjx Acpju Price: On request - Serial number: U5624 - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1200 - Max. cutting to feed roller opening [mm]: 450 - Max. cutting to stop opening [mm]: 330 - Max. cutting height [mm]: 320 - Table width [mm]: 1000 - Table length [mm]: 1150 - Max. band saw width [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 46.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2700mm x 2250mm x 3270mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,400 mm, total length: 2,000 mm, total width: 950 mm, Year of manufacture: 2002 Colour: Blue Weight: 1.500 kg - Year: 2002 - CE marking present: Yes - Serial number: AY11051 - Main motor power [kW]: 15.0 - Wheel diameter [mm]: 915 - Max. cutting to feed roller opening [mm]: 230 - Max. cutting to stop opening [mm]: 260 - Max. cutting width to column [mm]: 300 - Max. total opening [mm]: 480 - Max. cutting height [mm]: 330 Kdodpfxozudb Eo Acpeu - Table width [mm]: 1010 - Table length [mm]: 740 - Max. band saw width [mm]: 100 - Min. band saw length [mm]: 5385 - Max. band saw length [mm]: 5485 - Min. band saw thickness [mm]: 0.8 - Max. band saw thickness [mm]: 1 - Extraction port diameter [mm]: 150 - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.0 - Transport dimensions: 2000mm x 950mm x 2400mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1993, functionality: fully functional, Complete Sawmill / Sawing Line E.GILLET–KARA-STENNER Description: For sale: complete E.GILLET–KARA-STENNER sawing line for professional timber processing. The line includes log handling, sawing, board discharge, cross transport and length cutting equipment. Suitable for a sawmill or wood processing company looking for a complete production line rather than separate individual machines. Included equipment: 1. E.GILLET wide band saw Kodpfx Aezhbr Iocpjdu 2. KARA YS-VI, LS-240 circular saw 3. STENNER 105 wide band saw 4. Log conveyor — 26 m 5. Log conveyor — 7 m 6. Log splitter / log divider 7. Roller table — 16 m 8. Board unloading table 9. Cross conveyor — 8 m 10. RKG 1-400 cut-off / length cutting saw 11. Roller table — 6 m If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. Ksdezu Aibepfx Acpodu The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Kodpfx Acev Rbvcspsdu Year of manufacture: 2018 Operating hours: 2 operating hours Technical specifications Type: RS 18.5 Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level: 71 dB(A) Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Visit our Retail store. We always have a large selection of new and used compressors in stock!

Condition: used, The Stenner VH105 double bandsaw with two movable saw blocks that allow one of them to be placed behind the feed system to cut with one saw or to feed timber through the saw without sawing, both without removing the saw blade. - Manufacturer: Stenner, Kdsdpfxstp E Uzs Acpju - Model: VHET105, - Saw pulley diameter: 1050 mm, - Saw blade width: 130 mm, - Feed speed: 10 – 80 m/min, - Distance between saws: 5 mm, - Distance between saws max: mm: 400 mm.

Condition: used, Year of construction: 2016, operating hours: 14,279 h, machine/vehicle number: 644063, delivery quantity 4.61 m³/min at 10 bar delivery quantity 5.23 m³/min at 8 bar operating pressure 10 bar Kdedon Stanopfx Acpju nominal power 30.0 KW operating hours 14,279 load hours 11,148 compressed air connection G1 1/4" sound level 69 dB(A) space requirements length - 1,400 x width - 830 x height - 1,640 mm weight approx. 850 kg

Year of construction: 1998, condition: excellent (used), RENNER RS 15 screw compressor ROTORCOMP screw stage, Kjdpjh Eu A Nofx Acpedu 15KW motor, Capacity 1.92 m3 / min, Pressure 10 bar, THE MACHINE IS FULLY OPERATING. WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE SCREWS, REFRIGERATION DRYERS AND EQUIPMENT WELDING. WE PROVIDE REPAIRS AND SERVICE.

Condition: used, Schunk Type: SAR-1300 B Material Separator Technical Data: External Dimensions: Width: 1325 mm Width of operator console: 565 mm Depth: 1300 mm Shuttle overhang: 730 mm Ksdjzd Sq Topfx Acpodu Height: 1870 mm Light column overhang (top): 350 mm Operator height: 900 mm Speed: X, Y: Linear motor axes 2000 mm/s Z: Linear motor axes 1000 mm/s Weight: approx. 1500 kg Accuracy: Repeatability: 0.02 mm Positional accuracy: 0.02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working Area: Max. separation area X, Y: 430 mm x 350 mm Max. material size X, Y: 430 mm x 350 mm Material thickness: 0.5 - 3.2 mm Power Supply: 400 V / 50 Hz / 16 A Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Kjdezd Shropfx Acpedu