Used Rule Pump for sale (9,514)

Condition: new, Year of construction: 2025, Efficient Gbjdpfx Aetu H Eioanjw Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: used, Hydraulic Pump Unit, Seipee 37 kW Industrial Electric Motor with Hydraulic Pump and Dual Filter Assembly, Used Machine Technical Specifications Manufacturer: Seipee (Made in Italy) Type: GM 225S 4 B3 Year of Manufacture: 2011 Power Output: 37 kW Speed: 1480 rpm Voltage: 400/690 V (Delta / Star) Frequency: 50 Hz Rated Current: 66.2 A (Delta) / 38.4 A (Star) Efficiency Class: IE2 (92.7% efficiency at 100% load) Power Factor (cos φ): 0.87 Protection Class: IP55 Overall Dimensions Width: 1620 mm Depth: 515 mm Height: 590 mm Weight: 400 kg Gbjdpfe Ahx Dzjx Aansw

Condition: used, Centrifugal Pump, Pump 7.5 kW, Ritz, Used Machine Gsdpj Ah Ebhjfx Aansbw Overall Dimensions: Length: 650 mm Width: 450 mm Height: 510 mm Manufacturer: Ritz Electrical Data: 400V; 7.5 kW; 15.1 A Flow Rate: 54 m³/h Head: 16 m

Condition: used, Pump, Wilo IPL50/175-7.5/2; 7.5 kW; Used machine Manufacturer: Wilo Type: IPL50/175-7.5/2 Overall dimensions: Width: 270 mm Depth: 380 mm Height: 670 mm Electrical data: 400V; 13.6 A; 7.5 kW Gbjdpfx Asy Ezb Tjanew Maximum pressure: 10 bar Fluid temperature range: −20 °C … +120 °C Maximum flow rate: approx. 69 m³/h Maximum delivery head: approx. 38 m

Condition: ready for operation (used), Pump; KSB ETABLOC GNF 050-315 Centrifugal Pump, Used machine Manufacturer: KSB ETABLOC Gjdpjyh D H Tjfx Aanebw Type: GNF 050-315 Overall dimensions: Width: 510 mm Depth: 420 mm Height: 700 mm Weight: 55 kg Electrical data: 400 V; 1450 rpm Flow rate: 30 m³/h Head: 26 m Year of manufacture: 2010

Condition: excellent (used), GRACO CHECK-MATE L20C 5:1 Slide CM4B1H Gbsdpfxoqi Amuj Aanjw CHARACTERISTICS: - Brand: GRACO ; REF. CM4B1H - Putties, sealants, silicones, polyurethanes, etc. - General industry - This new product would have a price of 7.777,00 €. - Used, completely overhauled ✅ - Warranty 1 year ✅ - International shipping ✅ - VAT not included

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, For sale: KSB Sewabloc K 65-250 G V industrial pump with a 2.2 kW electric motor. Centrifugal pump, monobloc design, with flanged connections. Data from the nameplates: Manufacturer: KSB Model: Sewabloc K 65-250 G V Year of manufacture: 2012 Gjdpj Aibg Hjfx Aanjbw Nominal flow rate: 6.22 l/s, approximately 22.4 m³/h Head at the nominal point: 8.05 m Motor power: 2.2 kW Power supply: 230 V Δ / 400 V Y, three-phase Frequency: 50 Hz Pump speed: 1455 rpm Impeller diameter: 170 mm Motor protection rating: IP55 Motor efficiency class: IE2 Unit weight according to the nameplate: approximately 103 kg Condition: used. Visible signs of use, localized paint chipping, and superficial surface corrosion. Appearance matches the photos. NOTE: THE STATED PRICE APPLIES TO ONE UNIT – ONE PUMP WITH MOTOR.

Condition: new, Year of construction: 2019, functionality: unexamined, WILO EMU FA 10.62E SUBMERSIBLE SEWAGE PUMP – 5 kW 400 V ATEX WILO EMU FA 10.62E – PROFESSIONAL SEWAGE PUMP FOR PUMP STATIONS AND SEWERAGE SYSTEMS For sale is an original WILO EMU FA 10.62E submersible sewage pump with an FK17.1-4/12KEx motor, 5 kW power, and 400 V three-phase power supply. This is an industrial sewage pump designed for the transport of municipal and industrial wastewater, as well as contaminated liquids, in appropriately designed installations. The pump from the German manufacturer WILO belongs to the professional EMU FA series, used in water and sewage installations, sewage pumping stations, and wastewater treatment plants. Key parameters: • Manufacturer: WILO – Made in Germany • Model: EMU FA 10.62E • Motor power: 5 kW / 5000 W • Supply voltage: 400 V, three-phase • Nominal flow rate: 115.6 m³/h – 115,600 l/h • Nominal head: 9.1 m • Year of manufacture: 2019 • Protection class: IP68 • Motor design: Ex / ATEX POWERFUL SUBMERSIBLE SEWAGE PUMP – KEY FEATURES HIGH EFFICIENCY – 115,600 L/H The pump’s nominal flow rate is 115.6 m³/h. The unit is designed for transporting large volumes of wastewater in professional pumping systems. 5 KW / 400 V INDUSTRIAL MOTOR Three-phase WILO FK17.1-4/12KEx motor with a rated power of 5 kW, designed for operation in industrial installations. IP68 SUBMERSIBLE PUMP Design intended for submerged operation. The maximum immersion depth according to the nameplate is 20 m. EX / ATEX EXPLOSION-PROOF DESIGN The pump is equipped with a motor with a factory Ex marking. Use in explosion-hazard areas requires the specific installation to comply with the manufacturer’s documentation and applicable requirements. ROBUST HYDRAULICS FOR WASTEWATER Centrifugal pump with hydraulics designed for transporting wastewater and liquids containing contaminants. According to the FA 10.62E series documentation, a single-channel impeller is used. TECHNICAL DATA – WILO EMU FA 10.62E Parameter Value Brand WILO Series EMU FA Model FA 10.62E Motor type FK17.1-4/12KEx Type Submersible sewage pump Rated power P2 5.00 kW Power supply 3 × 400 V Frequency 50 Hz Rated current 10.80 A Motor speed 1400 rpm Nominal flow rate 115.6 m³/h Nominal head 9.1 m Protection class IP68 Operating mode S1 Maximum medium temperature 40°C Gjds Aibg Rspfx Aansbw Maximum immersion depth 20 m Impeller diameter 220 mm Design Ex / ATEX Year of manufacture 2019 Country of manufacture Germany The stated flow rate and head values refer to the pump’s nominal operating point.

Condition: new, functionality: unexamined, Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens Gbsds Aibhcepfx Aanow INDUSTRIAL PUMP GRUNDFOS CR15-5 5.5 kW – VERTICAL MULTISTAGE 400V SIEMENS IE4 The GRUNDFOS CR15-5 K-F-A-E-HQQE is a professional, vertical multistage centrifugal pump designed for industrial installations, pressure boosting systems, water supply systems, and technological systems. Equipped with an energy-efficient Siemens / Innomotics IE4 motor with a power of 5.5 kW, it provides high performance and efficient operation in demanding water installations. Original Grundfos pump – catalog number 93138502, manufactured in Denmark. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Manufacturer code: CR15-5 K-F-A-E-HQQE KEY ADVANTAGES Flow rate: 17 m³/h (17,000 l/h) – suitable for industrial and water installations. Maximum head: 74.6 m – for systems requiring high pressure. Power: 5.5 kW, power supply: 400V – three-phase Siemens IE4 motor. Maximum pressure: 16 bar – robust industrial design. Vertical multistage pump – compact design. Hydraulic components made of stainless steel – durability and corrosion resistance. Mechanical seal: HQQE – professional Grundfos solution. Protection class: IP55 – motor adapted for industrial operation. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Brand: Grundfos TECHNICAL DATA GRUNDFOS CR15-5 Manufacturer: Grundfos Model: CR15-5 K-F-A-E-HQQE Product number: 93138502 Type: centrifugal pump, vertical, multistage Motor power: 5.5 kW / 5500 W Flow rate (from nameplate): 17.0 m³/h Head H: 61.8 m Maximum head Hmax: 74.6 m Maximum pressure: 16 bar Maximum liquid temperature: 120°C Pump speed: 2919 rpm Frequency: 50 Hz Seal: HQQE Country of manufacture: Denmark Operating mode: S1 – continuous Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Type: other APPLICATION OF THE INDUSTRIAL PUMP The Grundfos CR15-5 pressure pump can be used in: booster sets and pressure boosting systems, water supply and industrial installations, water treatment and filtration systems, cooling installations and technological circuits, industrial washing systems, HVAC installations and circulation systems, production lines and process installations. Pump selection requires consideration of the hydraulic characteristics of the installation and the type of fluid.

Condition: used, functionality: fully functional, For sale: a used submersible pump with a capacity of 160 m³/h, powered by a 7.5 kW motor and operating on 380 V. The pump has been inspected and is in full working order. Gedpfx Aas Aibrienobw Condition/defect: a crack in the outer part of the housing casting. The pump has been fully tested and confirmed to be working; this defect does not affect its operation.

Condition: used, functionality: fully functional, For sale: KSB KRTF 80-200/24 UH industrial submersible pump, designed for pumping wastewater and contaminated water. Robust, cast iron construction with a lifting handle. Data from the nameplate: Capacity: 45 m³/h – 45,000 liters per hour Head: 5 m Motor power P₂: 1.8 kW Power supply: three-phase 400 V Frequency: 50 Hz Rated current: 4.3 A Rotational speed: 1450 rpm Ingress protection: IP68 Gedpo Aibc Hofx Aanobw Operating mode: S1 – continuous operation Insulation class: F Weight: 108 kg Equipment visible in the photos: Float switch Power cord with plug and electrical module Discharge elbow with barbed connector Lifting handle The pump is used, with visible signs of wear, paint chipping, and surface corrosion. The visual condition and scope of sale are shown in the photos.

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Gedpfx Aezvrnioanebw Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: used, functionality: fully functional, mileage: 206,134 km, first registration: 05/2026, fuel type: diesel, empty load weight: 16,114 kg, maximum load weight: 23,886 kg, overall weight: 40,000 kg, tire condition: 70 %, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, total length: 9,913 mm, total width: 2,550 mm, loading space volume: 11 m³, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, Iveco Trakker 410T50 CIFA MK28L concrete pump with 11 cubic meter concrete mixer + 28-meter pump with 4 booms + 4 outriggers + remote control 8x4 leaf-sprung suspension 13-ton front axles differential lock manual transmission auxiliary drive Euro 6 GVW 40,000 kg - payload 23,886 kg total truck length 9.91 m wheelbase 4.40 m tires 70% remaining Gsdpj Aig Nbefx Aansbw 300L fuel tank ABS sun visor electric windows and exterior mirrors air conditioning radio air-suspended driver's seat central locking round lights all information subject to change without notice / errors and omissions excepted

Condition: used, overall weight: 80 kg, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cooling capacity: 5.5 kW (7.48 HP), immersion depth: 460 mm, Equipment: type plate available, Spandau Pump, SKF Lubrication Systems Germany GmbH Submersible centrifugal pump, submersible pump, coolant submersible pump, centrifugal pump unit, immersion pump TYPE PSL0303GBS460N05BA Immersion depth: 460 mm, 400 V, 50 Hz Delta connection 5.5 kW IE2 Tmax 80°C Qmax 1200 l/min, Hmax 49 m Weight 80 kg The coolant pump is used and was mounted on a filter system. The nameplate on the centrifugal pump reads "Made in Germany". Godow Rvhdopfx Aanobw Price: negotiable Our asking price is €1,680.00 net, ex works, plus packaging costs. All technical specifications are subject to printing errors and changes. We only sell to countries within the European Community.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1992, High-pressure pump/high-pressure plunger pump/channel flushing pump Uraca KD716-G (with integrated gearbox i=3.32) DATA Plunger: d65 mm (optionally d55 or d60 mm) Gbsdpfxjz Hzxvj Aansw Operating pressure: 140 bar (optionally 200 or 170 bar) Flow rate: 144 - 370 l/min (depending on the drive power/drive speed, see data sheet) Gear ratio: i=3.32 Gearbox shaft: 46 mm Drive: left or right with engine cooler DESCRIPTION Condition: fully reconditioned (pump head including plunger and valves completely new, all bearings and seals, etc. new), ready for use and in very good condition.

Condition: used, Used Refurbished 1-year warranty New electric motor, mineral oil included 5.5 kW motor 1.7 amps/1450 rpm - 1 rpm Measured ultimate pressure: 1.5 x 10-2 mbar Gbedewhnqyspfx Aanjw With gas ballast: 2 x 10-1 mbar

Condition: good (used), Leybold Trivac D16 B used in good condition. 1 year warranty. Further questions upon contact Godpfxspbchfe Aanjbw

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 20,000 l, diesel filling station 20000 litre with pump Gbsdpfxji Artlo Aanow

Condition: used, Technical details: tank capacity: 800 l overpressure : zul./max.=ca.100 bar motor: 5 weight: ca. 2,4 t Gsdpfeu N Ervsx Aansbw Hydraulic Pressure Storage Plant - aggregate= LxWxH=2,48x1,73x2,13m - oil tank :LxWxH=2,0x1,1x0,5m - 5 motors ( from 3,8 up to 66 kW) - coolant: nitrogen - 5 pumps iD. *

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Both pumps = 7.5 kW Weight 164 kg Gedpfx Aju N E Htjanjbw *

Condition: used, Technical details: tank capacity: 60 l motor: 1430 weight: 100 kg dimensions L x W x H: 0,85 x 0,45 x 0,85 m Further technical details: - speed 1,430 rpm (pump) Gjdpfxsu N E I Re Aansbw - hydr. Connection 3/4 " - oil tank LxWxH: 810x430x40mm i.D. *

Condition: used, Year of construction: 2005, Technical details: Total power requirement: 6,4 kW machine weight approx.: 250 kg dimensions L x W x H: 1,4 x 0,9 x 1,4 m Gbjdeu N E Nujpfx Aanow 2 pieces DOSING SYSTEM available. technical Details: - system pressure 125 bar - flow rate 3 l/min - reservoir preload pressure 80 bar - Motor SEW Eurodrive, 1410/1710 U/min erquipped: - hydraulic tank with 200 liter content, size L:850 x W:630 x H:380mm - oil basin size L:1100 x W:850 x H:380mm *

Condition: used, Technical details: tank capacity: 250 l overpressure : - bar motor: - dimensions L x W x H: auf Anfrage m There are 5 hydraulic pump units available for sale. (price per piece) Device no. 1 + no. 2 + no. 6: Features: Operating pressure max. 150 bar, connection Ø outside 30; 45; 52mm, capacity 250 litres, nitrogen capacity 20 litres Pressure 90 bar Device No. 4 Features. Operating pressure 160 bar, connection Ø outside P2=30; P1=45: Operating pressure 160 bar, connection Ø outside P2=30; P1=45; T=52; L=26mm, capacity 250 litres, nitrogen capacity 2x 10 litres Pressure 54 bar Gjdsu N E N Ijpfx Aanjbw Device No.7 Features. year of construction 2001, operating pressure 100 bar: year of construction 2001, operating pressure 100 bar, connection Ø outside P2/P3=26, P1=22; L=36mm, capacity 160 litres, nitrogen capacity 10 litres pressure 90 bar *

Condition: refurbished (used), operating hours: 10 h, functionality: fully functional, volume flow: 300 m³/h, power: 5.5 kW (7.48 HP), rotational speed (max.): 1,500 rpm, Busch RA305D vacuum pump, fully overhauled. 0.5 mbar abs, 300 cm³/h, available from stock. Gsdpfxjwv Rbds Aanjbw

Condition: used, Grundfos Circulation Pump TPED 50-160 / 2-S AFA-BAQE 1.1kW, Twin Pump Pump *New Price €6500 *New price €6500 AREAS OF APPLICATION - Heating systems - Local domestic hot water systems - Cooling and air conditioning systems FEATURES AND BENEFITS - Low power consumption - Adjustment according to existing operating conditions - Easy to install Technical data: Rotation frequency 2900 rpm Nominal flow rate 17 m³/h Nominal head 12 m Max. hydrostatic head 160 dm Shaft seal BAQE Liquids: Working fluid Water Fluid temperature range 0 .. 120 °C Temperature. Liquids 20 °C Density 998.2 kg/m³ Gbodpfsfuappjx Aanjw Materials: Pump housing Cast iron EN-JL1040 ASTM A48-40 B Impeller Cast iron EN-JL1030 ASTM A48-30 B Electrical data: Motor type 80B Number of poles 2 Rated power - P2 2 x 1.1 kW Industrial frequency 50 Hz Rated voltage 3 x 380-500 V Rated current 2.15-1.80 A Cos (power factor) 0.91-0.82 Rated speed 360-4000 rpm Energy efficiency 88.5% Protection class (IEC 34-5) IP55 Insulation class (IEC 85) F Motor protection Yes Motor number 98362352 Mounting: Maximum ambient temperature 50 °C Max. operating pressure 16 bar Max. pressure at a given temperature 16 bar / 120 °C Standard flange DIN Connection code F Pipe connection DN 50 Permissible pressure PN 16 Mounting length 340 mm Motor flange size FF165 Net weight 95 kg Data sheet