Used Turbo Molecular Pump for sale (9,654)

Condition: used, functionality: unexamined, overall weight: 120 kg, input voltage: 220 V, Used Shimadzu XH3306LMC Turbo Molecular Pump Manufacturer: Shimadzu Corporation Model: TMP-XH3306LMC | EI-XH3306M (controller) Kdjdpfxez Ipdpe Acpju Voltage: ~200-240 (50/60Hz) Weight: ~120 kg (total)

Condition: good (used), functionality: unexamined, overall weight: 90 kg, input voltage: 240 V, input frequency: 60 Hz, type of input current: AC, Used Shimadzu Turbo Molecular Pump TMP H3135LMC with TMP Power Unit (EI-C3153M) Magnetic Bearing Manufacturer: Shimadzu Corporation Kdsdpfov Dfyrex Acpeu Model: TMP-H3153LMC (S3) + EI-C3153M (S3) Max RPM: 24000 Voltage: ~200-240V (50/60Hz) VA: 1.5K Total Weight: ~ 90kg (ex pallet)

Condition: used, Pfeiffer Vacuum Turbo Pump Here, we offer a Pfeiffer vacuum turbo pump. 1 Turbo-molecular pump Pfeiffer TMH 1000M P 910 l/s, weight: 50 kg Type: TMH 1000M P Scope of delivery: (See image) Kdjdpfx Aezdqp Uocpju Condition: used (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG Turbo Molecular Pump with MAGPOWER Controller, Q2662100, ATH 2300M Model: Q2662100 Type: ATH2300M Condition: Used Kdsdpfx Acezh I I Nspsu Technical Data: ATH-M 200–240V AC 50/60Hz General: Magnetically levitated turbo molecular pump Water cooling Magnetic bearing (Maglev), oil-free Speed: 39,000 min⁻¹ Pumping speed N₂: approx. 1,600 l/s Ultimate pressure: < 6 × 10⁻⁹ mbar Motor: 40 Vrms, 1033 Hz, 12 Arms Inlet flange: DN200 ISO-F Outlet flange: DN 40 ISO-KF External electronics (Magpower) Adixen by Pfeiffer Vacuum Controller MAGPOWER S12A P/N: 120917 Rev. G Vi: V2.10.00 / Vn: V2.08.00 Vv: V2.10.00 Vm: V3.11 Accessories: Pfeiffer/Adixen pump cable A215300 - Pump-2-MAGPOWER cable for connection between turbo molecular pumps and control units Power cord: Hubbell HBL4770C (NEMA L7-15P, 277 V / 15 A) Remote control / I/O cable (DB25) Note on item condition: Gases passed: NF₃/N₂

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 Kjdpfoncd S Ujx Acpjdu 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: used, YT77-1Z-050, STP-iXA3305C, Edwards Turbo Molecular Pump - General Overhaul Ksdoityuwepfx Acpodu Model: YT77-1Z-050 Type: STP-iXA3305C Condition: General Overhauled

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Kdodpevrzaksfx Acpsu Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: used, functionality: unexamined, machine/vehicle number: STP-A3003C1-U, overall weight: 71 kg, rotational speed (max.): 27,000 rpm, Used BOC Edwards STP-A3003C1-U Turbo Vacuum Pump Manufacturer: BOC Edwards Technologies Ltd. Model: STP-A3003C1-U Max 27000RPM Kedpfx Aownbwgscpjdu For sale per unit.

Condition: new, Year of construction: 2023, functionality: fully functional, Performance & Pumping Speed • Max Pumping Speed (N₂): ~60 to 67 l/s • Max Pumping Speed (He): ~58 l/s Kjdpfx Acez Iw T Eopsdu • Max Pumping Speed (H₂): ~48 l/s • Max Pumping Speed (Ar): ~66 l/s • Interstage Pumping (N₂ / He): ~2.8 l/s • Ultimate Pressure: < 1 × 10⁻¹⁰ mbar (with rotary vane backing pump) Physical & Electrical Specs • Rotational Speed: Up to 90,000 rpm (0–1500 Hz) via controller like the TC 110 • Run-up Time: ~75 seconds • Sound Pressure Level: 48 dB(A) • Weight: Approx. 1.7 to 3.8 kg (depending on flange and controller setup) • High Vacuum (HV) Flange: DN 63 CF-F or DN 63 ISO-K • Electrical Input: 24V DC (± 10%), 6.3A (controller dependent) Brand new never used. Please check out our other listings as well.

Condition: used, Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffing & vacuum operation with pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional Pfeiffer Vacuum HLT 560 helium leak detector. The device is designed for highly precise leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service. It is suitable for the reliable detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffing modes. With the sniffing probe, leak locations can be precisely identified, while in vacuum mode, complete assemblies or systems can be tested. The turbo pump and pre-pump are integrated, making the device usable as a complete, mobile testing system. Application areas (examples): Leak testing of components and assemblies Testing of vacuum chambers, pipelines, valves, heat exchangers Quality control in production Service and maintenance work on vacuum equipment Technical data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Manufacturer: Pfeiffer Vacuum Integrated turbo pump Kedpezix Hxefx Acpedu Pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Measuring gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum mode / Sniffing mode Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump with frequency converter Kdjdpfx Asrfxgbscpsu Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: free of contamination

Condition: used, 800040V1444, T1600, Oerlikon Leybold, turbomolecular vacuum pump Kdsdevrgdzepfx Acpsu

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Kjdpfx Aerf U Trjcpedu Note on condition: free of contamination

Condition: as good as new (ex-display), 800002V2237, TW 70 H Leybold, turbomolecular pump with external frequency converter Model: 800002V2237 Type: TW 70 H Ksdpfx Acevrgdnepedu Condition: As good as new

Condition: as good as new (ex-display), 800002V2236, TW70, Leybold, turbomolecular pump with external frequency converter Kdodpfx Acsvrgdhjpju Model: 800002V2236 Type: TW70 Condition: As good as new

Condition: used, Turbomolecular pump Manufacturer: Pfeiffer Type: TPU 2000S Condition: Used No.: PMP01141/9007 Kdedpfjdcpbkex Acpju A warranty of 12 months is possible.

Condition: as good as new (ex-display), 85635, TURBOVAC 151 C, Leybold, turbomolecular pump Model: 85635 Type: TURBOVAC 151 C Condition: As good as new Kdodpfx Acevrgduspou

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Kedpfxeikq Tyj Acpjdu Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: used, Condition: Like new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Note: Must be operated with a suitable pre-pump and control system. Kdsdpfxsc Irrke Acpeu Delivery time: upon request

Condition: new, In original box. Kjdpofyla Ajfx Acpodu Never used Pfeiffer Adixen Alcatel ATH 1600 M Turbomolecular Vacuum Pump - 5-axis magnetically levitated turbopump with drag stage for a pump speed of up to 1,400 l/s for N2.

Condition: used, YT67-0Z-040, STP-XA4503C, Edwards Turbomolecular Pump Model: YT67-0Z-040 Type: STP-XA4503C Kedpfx Acsityv Uepedu Condition: Used

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Kodpfsx Ap I Tsx Acpodu Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: refurbished (used), Turbomolecular pump Various devices available! Kodpjmdraysfx Acpedu Status: As good as new Manufacturer: Leybold Type: Turbovac 1100 C Cat.No.: 89480 Delivery time: ex stock

Year of construction: 2016, condition: as good as new (ex-display), Turbomolecular pump Condition: Like new Manufacturer: Leybold Ksdjhmb Emjpfx Acpjdu Type: MAG W1300 iP - DN200 CF Delivery time: Available from stock

Condition: new, ULVAC Dry Vacuum Pump Here we offer a ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for demanding process applications Dry vacuum pump ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features The LR series pump is designed for load-lock chambers and PVD processes. ULVAC's unique aluminum design enables a very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Encapsulated motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents wear of internal pump parts when exposed to corrosive gases. (LR Series) Designed for process gases that generate powdery by-products, such as Si crystal growth furnaces Pre-pump for turbo-molecular and mechanical booster pumps Kedszdqtgepfx Acpjdu Type: LR600 Condition: new Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.