Used Safety Contactor for sale (11,004)

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Lodpfx Ahsz I Ti Nj Ssru Sterilization process: Vacuum-assisted steam sterilization Sterilization temperature: 121–134 °C Vacuum cycles: Pre- and post-vacuum Chamber material: Stainless steel AISI 316L Pipe material: Stainless steel AISI 316L MACHINE DETAILS Control: PLC-based control Operation: HMI touchscreen Monitoring: Real-time cycle control with batch documentation Sensors: Integrated temperature and pressure sensors Standards: EN 285, PED, ISO 9001, GMP Validatability: According to ISO 17665 EQUIPMENT Stainless steel sterilization chamber with polished surface Vacuum pump system for pre- and post-vacuum Steam generation and steam distribution system PLC control with HMI touchscreen Integrated temperature and pressure sensors Diagnostics: Integrated self-test functions Media supply: Steam, water, compressed air, and power supply Door operation: Automatic Door locking: Safety interlock to prevent opening under pressure

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 Ledpfxez Rztve Ah Seru If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2025, condition: new, Manufacturer: Consolidated / Baker Hughes Model: 1910-00K-1-CC-MS-31-RF-LA-HP-PED Year of manufacture: 2025 Quantity available: 3 units Condition: New surplus equipment, visually in excellent condition We offer three Consolidated 1910 Series industrial safety relief valves, manufactured in July 2025 by Dresser Italia S.r.l. The valves are designed for liquid service and feature original manufacturer identification plates with CE, ASME UV, and NB markings. Technical specifications: Series: Consolidated 1910 Outlet size: 3" / DN80 Service medium: Liquid Set pressure: 9.5 bar / 10.7 bar Nominal lift: 15.37 mm Flow area: 1,379.35 mm² Manufacturer: Dresser Italia S.r.l., Italy Manufacturing date: 07/2025 Available units: Serial number: N-25-006784 – Set pressure: 9.5 barg – Tag: SVP773 Serial number: N-25-006986 – Set pressure: 10.7 barg – Tag: SVP1122 Serial number: N-25-006785 – Set pressure: 9.5 barg – Tag: SVP775 Condition and documentation: The valves are in visually excellent condition. Previous installation or operating history has not been confirmed. Ledpfx Ahoz Nh Ids Ssru Individual test certificates are not currently available. Available from our warehouse in Rotterdam, the Netherlands. Worldwide shipping can be arranged upon request. Please contact us for additional pictures, technical information, or a quotation.

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Lsdpfx Ahj Ad N D Uo Seru Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Operating hours: 13,483 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,600 kg Mast Mast type: Triplex mast with full free lift Lifting height: 5,255 mm Forks Fork length: 1,200 mm Fork positioner: hydraulic Side shifter: included Hydraulics Additional hydraulics: 3rd and 4th valve Drive and battery Drive type: Electric Battery voltage: 48 V Battery capacity: 500 Ah Battery manufacturer: Hawker Battery date: 05/26/2026 (?) Battery resting voltage: 50.1 V MACHINE DETAILS Manufacturer: Linde Type: E16-02 EVO Year of manufacture: 2017 Operating hours: 13,483 h Own weight: 3,400 kg Overall length: 3,200 mm Overall width: 1,150 mm Overall height: 2,321 mm Lredpfxsz R Dw Rs Ah Seu Service valid until: 06/2027 UVV (Industrial Safety Regulations) valid until: 05/2027 (?) EQUIPMENT Full cabin Heater Windshield wiper Facelift model with tilt angle indicator LED work light front LED work light rear Safety light rear Comfort seat with lumbar support Seat heating Previously a Linde full-service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not completed on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 154

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,598 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX60-30 Year of manufacture: 2020 Drive type: Electric Operating hours: 10,598 h LIFTING CAPACITY AND MAST Lifting capacity: 3,000 kg Lifting height: 4,150 mm Mast type: Duplex mast Fork length: 2,400 mm BATTERY Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery date: 18/2020 (?) Battery voltage in idle state: 84.9 V INSPECTIONS AND MAINTENANCE Lsds Ad N Dhjpfx Ah Seru Service valid until: UVV inspection valid until: MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 4,900 mm Width: 1,200 mm Height: 2,750 mm Weight: 5,100 kg EQUIPMENT Former Still full-service unit Clear-view mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Half-cab with windshield wiper White, non-marking tires LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Lot number: 155 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Ledpfx Ahozxgtfj Seru Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Lrodpfxoxhfr Ej Ah Seu Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: ready for operation (used), functionality: fully functional, operating hours: 4,777 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 4,777 h Load capacity and mast Load capacity: 1,800 kg Lifting height: 4,500 mm Mast type: Triplex mast Full free lift: available Battery Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Hydraulics Hydraulic valves: 3rd and 4th valve Side shifter: available Hydraulic fork positioner: available Inspections and maintenance Service valid until: 10/2027 UVV inspection valid until: 10/2027 MACHINE DETAILS Dimensions and weight Length: 3,000 mm Width: 1,150 mm Height: 2,060 mm Own weight: 3,400 kg EQUIPMENT Ledpfxe Ad N Dno Ah Ssru Battery charger Fork positioner with side shifter Lateral fall-through guard LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Lot number: 219 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,778 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Duplex mast with full free lift Lifting height: 3,760 mm Load capacity: 3,000 kg Fork length: 1,200 mm Hydraulics: 3rd valve Side shifter: included Drive and Battery Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery date of manufacture: Week 48/2022 Battery voltage at rest: 84.5 V MACHINE DETAILS General Manufacturer: Linde Type: E30HL Year of manufacture: 2018 Operating hours: 10,778 h Dead weight: 5,800 kg Dimensions Overall length: 3,700 mm Overall width: 1,200 mm Overall height: 2,500 mm Inspections and Service Service valid until: UVV (German accident prevention regulations) valid until: Ljdpfsz R D Agsx Ah Sjru EQUIPMENT Duplex mast with full free lift Side shifter Semi-cabin with windshield wiper Roof panel Lateral fall protection, removable LED work light, front LED work light, rear Safety light, front Safety light, rear Comfort seat Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for trucks with a height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 193

Year of construction: 2021, operating hours: 17,634 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift Mast Mast type: Duplex mast Lift height: 5,495 mm Free-lift mast: Without center hydraulic cylinder Free lift: No Load Capacity and Forks Load capacity: 3,500 kg Fork length: 1,200 mm Hydraulically adjustable forks: Yes Side shifter: Yes Drive Drive type: LPG (liquefied petroleum gas) Diesel drive: No MACHINE DETAILS Machine data Manufacturer: Linde Type: H35T Year of manufacture: 2021 Operating hours: 17,634 h Self-weight: 5,516 kg UVV certificate valid until: Formerly a Linde full-service unit Facelift model Dimensions Lodpsz R Dqwefx Ah Seru Overall length: 5,200 mm Overall width: 1,450 mm Overall height: 3,424 mm EQUIPMENT 3rd and 4th hydraulic valve Fork positioner with side shifter Full cabin Air conditioning Heater Windshield wiper Comfort seat with lumbar support Seat heating LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety light, front Safety light, rear All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 45

Condition: ready for operation (used), functionality: fully functional, operating hours: 12,140 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,050 mm Fork length: 1,200 mm Mast: Duplex mast Mast design: Free-lift mast without center hydraulic cylinder Side shifter: included Hydraulics: 3rd valve with side shifter Additional hydraulics: 4th additional valve prepared for fork positioner MACHINE DETAILS Manufacturer: Linde Type: E25L Year of manufacture: 2011 Drive type: Electric Battery voltage: 80 V Battery capacity: 625 Ah Battery voltage at rest: 83.4 V Operating hours: 12,140 h Self-weight: 4,300 kg Overall length: 3,700 mm Overall width: 1,150 mm Overall height: 2,600 mm Ljdpfxoz R Dtxs Ah Sjru Service valid until: UVV (occupational safety) valid until: EQUIPMENT White, non-marking tires LED work light, front LED work light, rear Orange warning light Comfort seat All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: * Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. * Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. * Collection is only possible after receipt of payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * If the machine is not collected within the specified time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 89

Condition: used, machine/vehicle number: H2X393V04197, Year of construction: 2019, operating hours: 24,689 h, load capacity: 3,000 kg, lifting height: 3,615 mm, mast type: duplex, fork length: 1,350 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm Telescopic forks: up to 2,350 mm MACHINE DETAILS Mast type: Duplex mast with full free lift Drive type: LPG Fuel system: LPG gas tank Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,250 x 2,441 mm Weight: 4,680 kg Next service due in: 311 hours UVV certification valid until: 07/2027 Operating hours: 24,689 hours EQUIPMENT Former Linde full-service unit Tilt angle indicator Full cabin Heater Windshield wiper Ledpfxsz Npl Do Ah Sjru LED work light (front) LED work light (rear) Safety light (front) Safety light (rear) Safety light (side) Rear-view camera Comfort seat Lumbar support Seat heating Functional and condition video available Hydraulics: 3rd and 4th hydraulic valve Side shifter Integrated scale All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 96

Operating hours: 4,375 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Number of wheels: 3 Operating hours: 4,375 h MACHINE DETAILS Manufacturer: Linde Type: E16 Year of manufacture: 2020 Drive type: Electric Own weight: 3,500 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm Battery year of manufacture: Battery voltage: 48 V Battery capacity: 625 Ah Battery voltage at rest: 50.8 V Battery charger: Not available EQUIPMENT Side shifter 3rd hydraulic valve Full cabin Cabin heater Windshield wiper LED work light, front LED work light, rear Tilt angle display Service valid until: 12/2026 Safety inspection valid until: 12/2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lrsdpfxez R Dwwo Ah Sju Lot number: 124

Condition: ready for operation (used), functionality: fully functional, operating hours: 14,594 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: E16L Year of manufacture: 2020 Drive type: Electric Load capacity: 1,600 kg Operating hours: 14,594 h Mast Mast type: Duplex mast Full free lift: Yes Lifting height: 3,145 mm Hydraulics 3rd auxiliary valve: Yes 4th auxiliary valve: Yes, free for fork positioner Side shifter: Yes Battery Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery voltage at rest: 51.13 V Inspections and Service Service valid until: 10/2027 UVV (Occupational Safety) certificate valid until: 10/2027 MACHINE DETAILS Own weight: 3,200 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm EQUIPMENT Formerly a Linde full-service machine EVO facelift model Color display Tilt angle indicator Semi-cabin Windshield with windshield wiper Roof window LED work light (front) LED work light (rear) Comfort seat Lumbar support Seat heating Battery charger High-quality charger, year of manufacture 2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lrsdpoz R Dzcsfx Ah Ssu Lot number: 188

Operating hours: 3,380 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 2,000 kg Forks Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery voltage at rest: 24.7 V Operating data Operating hours: 3,380 h MACHINE DETAILS General Manufacturer: Linde Type: T20AP Year of manufacture: 2020 Own weight: 900 kg Dimensions Overall length: 2,000 mm Lrjdpfx Ahoz R D Hrs Sou Overall width: 800 mm Overall height: 1,400 mm Inspection UVV valid until: 06/2027 (?) EQUIPMENT Safety light at the front Safety light at the rear All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 342

Year of construction: 2020, condition: used, This listing is for the Labogene ScanLaf Mars 1500 Class II biological safety cabinet The unit is in full working condition and ready for immediate us The Labogene ScanLaf Mars 1500 is a Class II biological safety cabinet designed to provide operator, product and environmental protection. It features HEPA filtration, vertical laminar airflow, motorised front window and adjustable lighting. Ljdpfjz D Dl Tjx Ah Ssru The working width is 1500 mm and the cabinet is manufactured and tested to EN 12469 requirements. External dimensions are approximately 1604 x 797 x 2033 mm and weight is approximately 275 kg, excluding the stand. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Operating hours: 3,822 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 2,844 mm Fork length: 1,150 mm Initial lift: Yes Battery voltage: 24 V Battery capacity: 240 Ah Battery voltage in idle state: 24.6 V Operating hours: 3,822 h MACHINE DETAILS Manufacturer: Linde Type: L16i Year of manufacture: 2019 Mast type: Duplex Length: 2,200 mm Width: 800 mm Height: 1,915 mm Weight: 1,300 kg EQUIPMENT Initial lift for simultaneously lifting 2 pallets Increased ground clearance for uneven floors Formerly a Linde full-service machine All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Lodpfez R D Nyox Ah Seru Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of non-timely collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 375

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 Lrsdjxxrnbepfx Ah Sju # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Operating hours: 1,288 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm Battery voltage: 24 V Battery capacity: 300 Ah Battery voltage in idle mode: 25 V Operating hours: 1,288 h MACHINE DETAILS Lrjdpfx Ahez R D Ipo Sou Manufacturer: Toyota Type: LPD200 Year of manufacture: 2020 Own weight: 850 kg Overall length: 2,000 mm Overall width: 800 mm Overall height: 850 mm EQUIPMENT Folding platform Battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information Lrsdex D Rlpepfx Ah Seu inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: ready for operation (used), functionality: fully functional, operating hours: 3,077 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Lifting height: 2,844 mm Fork length: 1,150 mm Load capacity: 1,600 kg MACHINE DETAILS General Manufacturer: Linde Type: L16i Year of manufacture: 2019 Operating hours: 3,077 h Service valid until: UVV (occupational safety) certificate valid until: Lsdez R D H Sjpfx Ah Seru Previously a Linde full-service unit Dimensions and weight Overall length: 2,200 mm Overall width: 800 mm Overall height: 1,915 mm Own weight: 1,300 kg Battery Battery: KW 35/2019 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage in idle state: 25.1 V EQUIPMENT Initial lift for simultaneous handling of 2 pallets Integrated scale Battery charger Functional and condition video available All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for non-timely collection. Outstanding storage fees must be paid in full before collection. Lot number: 344

Condition: used, machine/vehicle number: PKY391L00221, Year of construction: 2022, operating hours: 15,536 h, load capacity: 2,000 kg, lifting height: 3,150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,150 mm MACHINE DETAILS Drive type: LPG Lredsz Nxf Tjpfx Ah Sju Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,196 mm Self-weight: 3,290 kg Next service due in: 464 hours UVV certificate valid until: 06/2027 Tires replaced: 06/2026 Operating hours: 15,536 hours EQUIPMENT Facelift model with tilt angle indicator Clear-view mast without central hydraulic cylinder 3rd hydraulic valve Side shifter Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Seat heating LPG gas tank All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is carried out at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 181

Operating hours: 1,853 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,574 mm Fork length: 1,150 mm Operating hours: 1,853 h Battery voltage: 24 V Battery capacity: 410 Ah Battery voltage at rest: 25.5 V Battery year of manufacture: 05/07/2019 MACHINE DETAILS Manufacturer: Linde Type: D12HPAP Year of manufacture: 2019 Lredpfxez R D D Rj Ah Sou Own weight: 1,400 kg Overall length: 2,200 mm Overall width: 800 mm Overall height: 1,315 mm Service valid until: UVV (Occupational Safety Inspection) valid until: EQUIPMENT Lithium-ion battery Initial lift for two pallets simultaneously Ground clearance for uneven floors Integrated scale Functional and condition video available All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 310

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm Lodpfxjz I S Uwo Ah Seru MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain