Used Ga 50 Vsd for sale (39,716)

Condition: excellent (used), Year of construction: 2023, operating hours: 1,087 h, functionality: fully functional, machine/vehicle number: API474668, power: 26 kW (35.35 HP), Atlas Copco GA 26 VSD FF Rotary Screw Compressor Year 2023 For sale is a highly efficient variable speed driven premium screw compressor of the latest generation: Atlas Copco GA 26 VSDs FF with integrated refrigerant dryer (Full Feature). The machine was manufactured in 2023 and has an extremely low operating history of just 1087 running hours. Technically the compressor is in absolute 1A top condition and ready for immediate operation. Thanks to the state of the art VSDs variable speed technology the unit adapts flexibly and precisely to your actual compressed air demand. This ensures maximum energy efficiency and drastically reduces operating costs. With the integrated Full Feature equipment including a built in refrigerant dryer the system delivers dry and clean compressed air directly requiring a minimal footprint. Condition of the machine: Technical: 1A Top Condition. Runs perfectly, reliably, and without any maintenance backlog. Optical: The housing shows some cosmetic dents and scratches (see photos). These are purely transport related cosmetic imperfections. The flawless function, safety, and lifespan of the unit are in no way affected. Technical Data: Manufacturer: Atlas Copco Model: GA 26 VSDs FF with integrated refrigerant dryer Serial Number: API474688 Year of Manufacture: 2023 Operating Hours: 1087 h Motor Power: 26 kW (35 hp) Motor Speed: 5050 rpm Maximum Working Pressure: 10.25 bar Free Air Delivery at maximum pressure: 5.8 m3/min (96.5 l/s) Regulating Range Free Air Delivery: continuously variable from 0.95 to 5.88 m3/min Noise Level: 66 dB(A) Dimensions: Length 1330 mm, Width 870 mm, Height 1725 mm Weight: 604 kg Electrical Connection: 400 V, 50 Hz, 3 Phases Redpfx Abez Sqa Ujujch Country of Origin: Belgium

Condition: used, Year of construction: 2013, functionality: fully functional, Atlas Copco GA 5 VSD screw compressor, manufactured in 2013, from ongoing operation. The speed-controlled VSD technology adjusts the delivery rate according to demand, thus noticeably saving energy during partial load operation. An operating log with documented maintenance and operating hours was kept throughout the entire period of use (see photo). Redpoza Ah Ajfx Abujch Condition: • Used, well-maintained condition • Regularly serviced • Operating log available • Technically in use until recently Location: Selters. Shipping or collection from the location is possible. Technical data: Manufacturer: Atlas Copco Model: GA 5 VSD Year of manufacture: 2013 Drive power: 5.5 kW Voltage: 400 V / 50 Hz / 3-phase Max. operating pressure: 13 bar Control: Elektronikon Speed control: VSD (frequency-controlled) Weight: approx. 275 kg Refrigerant: R134a CE marking: present Location: Selters

Condition: excellent (used), Year of construction: 2012, operating hours: 280,000 h, functionality: fully functional, power: 45 kW (61.18 HP), fuel type: electric, Complete service history from Atlas Copco. Includes tank. Rcsdpfx Abo Afy Uaeush

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Technical data: - Operating hours: 28407 h - Operating pressure: 12.75 bar - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW - Motor speed: 3000 rpm - Integrated dryer Rcsdps Agr Ewofx Abueh - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Rcedpjv Rmmmjfx Abuoh

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Redpfxez Dpt As Abusch

Condition: good (used), Year of construction: 2023, Gear-driven drilling and milling machine GBFM 50 GAL Year of manufacture: 2023 Serial number: 03/C66 Rsdpfx Ajz Tqx Tebuech Drilling capacity: 50 mm Spindle travel: 180 mm Spindle taper: ISO 40 Speed range: 94-2,256 min-1 Weight: 2,000 kg

Condition: like new (used), Year of construction: 2019, operating hours: 36,285 h, functionality: fully functional, Premium second-hand Atlas Copco GA315VSD: 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with only 36,285 operating hours. Excellent condition. Rodeuzfv Eopfx Abuech

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Used BOMAR Ergonomic 290.250 GAC fully automatic bandsaw machine, manufactured in 2012. This professional horizontal bandsaw machine is suitable for the automatic cutting of various metal profiles, tubes, and solid materials. The machine features a fully automatic sawing cycle, a hydraulic saw arm, and a hydraulic material clamp. The cutting length and the number of parts to be cut can be set, making the machine very suitable for series production. The saw arm can be adjusted for miter cuts. Automatic cutting is possible up to 45°, while semi-automatic cutting is possible up to 60° under certain conditions. Specifications: Max. cutting diameter: Ø 250 mm Max. cutting capacity 0°: approx. 280 × 230 / 290 × 230 mm Max. square material 0°: 250 × 250 mm Saw blade: 2,910 × 27 × 0.9 mm Sawing speeds: 40 / 80 m/min Motor power: 1.1 / 1.5 kW Connection: 3 × 400 V Min. cutting diameter: Ø 5 mm Hydraulic up and down movement of the saw arm Hydraulic material clamp Dimensions: Length: 1,790 mm Width: 1,810 mm Height: 1,200 mm Rjdpfx Ae Afp T Sebuoch Weight: approx. 575 kg

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO GA30VSD screw compressor, machine with inverter, recently serviced. Technical specifications: capacity: 5.58 m3/min; engine power: 30 kW; maximum pressure: 13 bar; year: 2012; operating hours: 11816 h!!! Price: 24,500 net Price: 30,135 gross Rsdjy S T Thspfx Abuoch Compressor is fully functional, ready for operation, comes with a warranty. We provide service support.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: API429763, overall weight: 490 kg, fuel type: electric, volume flow: 216 m³/h, pressure (max.): 13 bar, Atlas Copco GA18VSD screw compressor with variable speed drive for compressed air supply in workshops and industry. TECHNICAL DATA – AS PER NAMEPLATE Manufacturer: Atlas Copco Model: GA18VSD Year of manufacture: 2010 Motor power: 18.5 kW / 25 hp Maximum permissible operating pressure: 13 bar Volumetric flow rate Qv as per nameplate: 60 l/s / 3.6 m³/min Power connection: 400 V, 50 Hz, 3 phases Weight: 490 kg Serial number: API429763 Rcjdpfx Ajz Hck Hebueh EQUIPMENT AND CONDITION Frequency-controlled drive (VSD) and sound-dampening enclosure. Technical and visual condition according to available information: very good. Maintenance and service history available; last reported service: 24.01.2025. Current operating hours are not available. An integrated refrigeration dryer is not confirmed and is not offered as a guaranteed component. LOCATION AND INSPECTION 65618 Selters, Germany. Inspection and collection by arrangement. Coordinate the scope and procedure of loading before collection. Price: EUR 5,750 net, negotiable, plus statutory VAT. Reference: RQ449789FA

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Rsdpsywi Daofx Abuoch

Condition: good (used), Year of construction: 2007, functionality: fully functional, overall weight: 519 kg, total length: 700 mm, total width: 1,800 mm, total height: 1,400 mm, power: 30 kW (40.79 HP), volume flow: 274.8 m³/h, operating pressure: 13 bar, Used, in good condition. Rcsdpsy Ruz Rofx Abujh Technical details: - Overall dimensions: approx. 1,800 x 700 x 1,400 mm (W x D x H) - Motor power: 30 kW - Pressure version: 13 bar - Operating pressure: 12.8 bar - Volume flow: 4.58 m³/min - Rated speed: 7,200 r/min - Frequency: 50 Hz - Weight: approx. 519 kg

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C Rcsdpfx Ajzzpttjbueh - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.

Condition: used, Year of construction: 2016, operating hours: 20,256 h, machine/vehicle number: API831057, Lg.No. 25372 Technical Data: - Operating hours: 20,256 h - Operating pressure: 13 bar - Delivery rate: 4.09 m³/min - Drive: 400 V / 26 kW - Motor speed: 3,000 rpm - Required space approx.: W 900 x H 1,750 x D 900 mm Rsdpeycvtwofx Abuoch - Weight approx.: 490 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Rodpfst Hdh Njx Abuech Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Rcsdpowlp Hdofx Abujh Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: excellent (used), Year of construction: 2016, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 11 VSD + screw compressor Rcodeytyh Hjpfx Abueh Variable speed drive (inverter controlled) 11 kW motor Capacity: 1.95 m3/min Pressure: 13 bar Year of manufacture: 2016 Operating hours: 9270 hours

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM Machine – in top technical and visual condition. The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional inspection were carried out using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and refurbished. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine is also in a very well-maintained visual condition. The generator and control system were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing requirements of OPS Ingersoll. The machine is ready for immediate use and is ideal for reliable production operations. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2014 Control system EAGLE Powertec PC/NC 3060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) Rsdpfxo Afg H No Abusch

Year of construction: 2013, condition: excellent (used), - ATEX: II G / 2G c IIA – T2 Rcjdpfx Ae Abbnaebuoh - Year of manufacture: 2013 - Motor: 2.5 kW / 400 V, 50 Hz, 2875 rpm - High-pressure fan: 5,077 Pa / 3,300 Pa - Volume flow rate (m³/h): 103 - Very few operating hours - In perfect condition

Year of construction: 2021, condition: new, Fastech Horizontal Bandsaw, Fully Automatic, BMSO 350 GA Cutting capacity (round): 350 mm Cutting capacity (rectangular): 400 x 350 mm Cutting capacity (square): 350 x 350 mm +30° Round cutting range: 320 mm Rcjdpfjg Ekt Njx Abuoh +30° Flat cutting range: 400 x 350 mm +30° Square cutting range: 350 mm +45° Round cutting range: 320 mm +45° Flat cutting range: 290 x 300 mm +45° Square cutting range: 290 x 290 mm Motor power, main drive: 2.2 kW Hydraulic pump power: 0.37 kW Coolant pump power: 0.12 kW Band speed, infinitely variable: 20-100 mm Saw band dimensions: 4160 x 34 x 1.1 mm Height of work surface: 760 mm Weight: 1050 kg Length: 2450 mm Depth: 920 mm Height: 2020 mm Roller conveyor, 1200 mm Infinitely variable band speed Hydraulic clamping device High-performance gearbox Hydromechanical saw band tensioning Saw band brush Control

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit Rcsdpfx Aj Afm Hvobuoh ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: VT 2573, spindle bore: 54 mm, spindle speed (max.): 2,500 rpm, swing diameter over bed slide: 400 mm, turning diameter over cross slide: 246 mm, distance between centers: 1,250 mm, MACHINE SPECIFICATION Height of centres 195mm Rcjdpfxez Im Nij Abueh Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800Kg Machine in Metric execution Machine Equipped with Acu-Rite 2 Axis Digital Readout System 3 Jaw chuck Quick change toolpost 5 Position turret Bedstop Single Bedstop Saddle guard Lighting Coolant system Chuck guard Rear splashguard

Condition: excellent (used), Year of construction: 2021, Palamides Gamma 502 Year 2021 Banding delivery system for folding machines, saddle stitchers, etc. Height-adjustable infeed Suitable for two product streams (parallel) Press station with a pair of press rollers Shingled product transport for high-speed production runs Banding system for two bands Rodpfxszqtl Es Abujch Equipped for 50 mm wide banding material Equipped for product thicknesses of 0–6 mm Foldable delivery table Located in Germany Used in conjunction with a Horizon machine; can also be adapted for other folders Available immediately

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 6,300 h, Dugard 1350 XP Machining Center (2017) Manufacturer: Dugard Type: 1350 XP Year of manufacture: 2017 Control system: Heidenhain iTNC640 Condition: good, used Spindle hours: 6300 hours Travel in X-axis: 1,350 mm Travel in Y-axis: 640 mm Rcsdpfxsy Tlv Re Abujh Travel in Z-axis: 660 mm Rapid traverse rate X-axis: 33 mm/min Rapid traverse rate Y-axis: 33 mm/min Rapid traverse rate Z-axis: 25 mm/min Workpiece weight (max.): 2,300 kg Overall length: 3,800 mm Overall width: 2,495 mm Table width: 1,500 mm Table length: 600 mm Table load capacity: 2,300 kg Spindle speed: 20 - 12,000 rpm Tool magazine: 36 Tool holder: SK 40 Chip conveyor Infrared probe TS 460 Tool measurement system TT160 Internal cooling system 20 bar Documentation/Manual