Used Sales Booths for sale (24,130)

Condition: new, Year of construction: 2025, The BUMEX SP. Z O.O.company presents a powder coating booth. working dimension: 4500x2300mm 6 x polyester filter Automatic filter cleaning with adjustable range from 10-1200 sec. 2 x fan 2.2 kW, 10,500 m³/h (Total 21,000 m³/h) 2 x LED lamp Delivery time 14-21 days Our cabins are characterized by a very high quality of workmanship, safety of use and selection of cabin parameters to the existing building. We advise on the selection of paint booths, dust extraction systems, exhaust systems and industrial recuperation. CHOOSEBUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Gsdjd S N Scspfx Aqieka Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. mdvncpiz We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. e.g Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Feel free to contact us.

Condition: new, Year of construction: 2025, total length: 1,600 mm, total width: 2,200 mm, total height: 2,350 mm, overall weight: 250 kg, type of input current: three-phase, working width: 1,400 mm, Paint booth, paint wall, suction TQN1414 With right or left side discharge. Working dimensions (mm): 1400 (width) x 1400 (height) x 800 (depth) Overall dimensions (mm): 1600 (width) x 2350 (height) x 1250 depth SPECIFICATION: • Fan power 1.5 kW, • Efficiency 6,500 m³/h, • 2 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Cabin available immediately (Stock status) SELECT BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products have an EC certificate. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us. Gjdpfx Aod S N I Noqijka

Condition: new, Year of construction: 2025, TM2015 spray booth Working dimensions (mm): 2000 (w) x 1500 (h) x 450 (d) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical data: • 1,5 kW fan power, • Capacity 7600 m³/h, • 950 Pa compression, • Right or left side discharge, • 3 stage air filtration, • The degree of filtration at the level of 98%, • Explosion-proof Ex fan, Godpfx Asd S N S Hjqieka • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, conveyor belt length: 3,000 mm, Powder coating set Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Paint Applicator Oven/Dryer Technical Specifications: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24.000 overhead rails • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24.000 overhead rail transport • Convection (Even temperature throughout the oven) • 2 x fans for air circulation • Safety locks for opening and closing. Powder booth: •Working dimensions: 2800 x 2200 mm •Fan power: 2.2 kW •Fan capacity: 10,500 m³/h •Very quiet operation •Automatic filter cleaning •LED lighting Wagner Sprint 2 electrostatic applicator CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Gedpfx Aqsguku Ueijka Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC certified. We offer our own transport – prices are determined on a case-by-case basis, based on each offer. We issue VAT invoices. Short lead times! Machines in various, customized configurations and sizes are available! Contact us today.

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Gkedjw Rpxcopfx Aqiea Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Gkedpfxop S Tlho Aqija Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Gedpeyniz Eefx Aqiska Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. Gsdpfjvxfkajx Aqijka FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, Salvage rough terrain forklift Br 30 Bj 1985 Timekeeping Lifting capacity 3000kg Raise height 3.00 meters Gjdpfx Asyvtu Tsqieka

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. Gjdpoc Uthdofx Aqiska ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: - Jet-Pulse Filter System - Mono Cyclone Gedpjggyigefx Aqijka - Multi Cyclone Advantages: - Easy to Use - Quick Color Change - Easy assembly and disassembly - Cleaner environment

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Gkjdpozrfpxjfx Aqioa Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: excellent (used), Huber & Ranner HVAC System (Air Handling Unit) Offered for sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was previously used as a recirculation system for a paint spray booth and is in excellent, clean, and professionally maintained condition. The system controls the complete air climate (filtering, cooling, humidifying, and air transport) and is ideally suited for production halls, paint shops, wood or metal processing facilities, and large-scale industrial projects. Technical specifications of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System designation: SPK ULA) Order number: 19 0090 Z / P.010 Airflow rate / Air capacity: 31,000 m³/h Module components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: Cu / Al (Copper/Aluminum) Refrigerant: R134a High-efficiency filter stage: Filter class: F9 / Standard (fine dust filter for maximum air purity) Filter type: TM 9U635A10-1 (Quantity: 9 units) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise humidity regulation; includes an integrated droplet separator to prevent moisture carry-over into the air duct. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Gjdpfx Aqszrmctoieka You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Gedpfx Aqezqur Hsijka Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s Gksdpfx Aezubtlsqisa • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, mileage: 133,344 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2004, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, A well-maintained MB Vario 814D from government/federal police ownership. Equipped as a bus (group vehicle) MR / high roof with full climate control & auxiliary heater, ABS and a differential lock on the rear axle, as well as a retarder, which is an electrically operated, wear-free eddy current brake for adjusting the speed. Before sale, the windshield will be replaced with a genuine glass one. Thanks to its good insulating properties, the plastic glazing on the side windows and in the rear section of the vehicle can remain. Furthermore, before sale, the bases and deflector shields of the former rotating beacons will be removed from the roof. The mounting holes will then be permanently sealed by us with metal plates and body adhesive. Also, before sale, we will remove the rear wooden cabinets. This will also create space for an RV conversion. Technically, this Vario is in good condition and does not require any immediate repairs - it has been regularly serviced according to the service schedule. All components such as the engine, transmission and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: Gksdpfxozthrlo Aqisa 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed Vmax according to the documents: 120 km/h A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - with adjustable backrests and armrests, and the left inner seats can also be moved forward on the console by approximately 10 cm for more freedom of movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH) For an additional cost of €750, we can carry out a technical modification to convert it into a motorhome if some seats are removed. Due to space limitations, up to 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. The body can be described as in good condition. There is partial corrosion on the lower sill edges L and R as well as on the rear door. In our body shop, we can effectively remove the rust spots. Severely corroded sections will be cut out and replaced with new sheet metal. This is done by our trained bodywork specialists - professionally and invisibly afterwards. Subsequently, the sections will be baked in the paint booth by trained professionals at 80 degrees to the next edge. This creates a closed paint surface, which thus effectively protects against any penetrating moisture. The sill panels will also be partially de-rusted from the rear and protected against new corrosion with a special paint coating. Cavities of the treated areas will be preserved with wax. We can offer you these body and paintwork services for an additional cost of €3,900. The time required for this is approximately 4-6 weeks, depending on the workload of the workshop. However, the Vario would also be roadworthy without these bodywork repairs. It drives well, and the gearbox shifts precisely. +++ Errors, changes and prior sale reserved.

Condition: used, mileage: 147,717 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2003, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D from government/federal police stock. Equipped as a bus (group vehicle) with a high roof, full air conditioning, and auxiliary heating. Features include ABS, driver airbag, and a differential lock on the rear axle, as well as a retarder – an electrically powered, wear-free eddy current brake used to adjust speed. Before sale, the windshield will be replaced with real glass. Thanks to its excellent insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain in place. In addition, the bases and deflectors of the former roof-mounted rotating beacons will be removed from the roof before sale. The mounting holes will then be permanently sealed by us with metal plates and body filler. Furthermore, before sale, we will dismantle the rear wooden cabinets. This will also create space for a motorhome conversion. Technically, this Vario is in good condition and requires no immediate repairs – it has been meticulously maintained according to the service schedule. During the last service, the engine oil pan was also replaced. All components, including the engine, transmission, and rear axle, are dry. The air conditioning and auxiliary heating are functional and very effective: 1) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2) The auxiliary heating system is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to documentation: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs with adjustable backrests and armrests. Furthermore, the left inner seats can be moved inwards towards the center console by approximately 10 cm for more freedom of movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional cost of €750, we can perform a technical modification to reclassify the vehicle as a motorhome, involving the removal of seats. Due to space constraints, up to 8 seats are possible. In this case, the Vario will also be equipped with a 220V external power connection. The body can be described as being in good condition. There is some corrosion on the lower edges of the rocker panels (left and right) and on the rear door. In our body shop, we can effectively remove the rust spots. Severely corroded areas will be cut out and replaced with new sheet metal. This will be done by our trained bodywork specialists – professionally and invisibly. Gkjdpfx Aezr Ayhjqisa Subsequently, the repaired areas will be baked in an oven at 60 degrees in the paint booth by trained specialists, up to the next edge. This creates a seamless paint finish that effectively protects against moisture. The rocker panels will also be partially de-rusted from the rear and protected against new corrosion with a special paint coating. Cavities in the treated areas will be preserved with wax. We can offer these body and paintwork services for an additional cost of €3,900. The time required for this will be approximately 4-6 weeks, depending on the workshop's workload. However, the Vario would also be roadworthy without these body repairs; it drives well and the transmission shifts precisely. +++ Errors, changes, and prior sale are reserved.

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Godpfxjymd E Ne Aqijka Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Asking Price: €5000+ VAT (or nearest offer) Enquiries welcome for complete system or individual components.

Condition: ready for operation (used), Year of construction: 2009, number of axes: 8, Welding robot manufactured in 2009. This CLOOS Romat 320 features an integrated 2-axis workpiece positioner with a vertical rotary turntable plate and an L-shaped tilt axis. It includes a full safety perimeter booth with optical safety light curtains and a dual pendant remote control box for station control. If you are looking to get high-quality welding capabilities, consider the CLOOS Romat 320 machine we have for sale. Contact us for further details. Gksdozg H E Depfx Aqioa - Load Capacity: 15 kg- Own Weight: 205 kg- Controller Unit Model: ROTROL® II- Interface / Input System: Integrated control cabinet panel with compact teach pendant (handheld programmer), full physical QWERTY keyboard drawer, and display unit.- Component/Workpiece Positioner: Integrated 2-axis Cloos workpiece positioner with vertical rotary turntable plate mounted on an L-shaped tilt axis.- Cell Enclosure: Full safety perimeter booth with blue/orange panel walls, integrated sliding or swing doors, and optical safety light curtains on the loading station perimeter.- Manual Operating Panel: Dual pendant remote control box with emergency stop and multi-button configuration for station control.

Year of construction: 2019, condition: good (used), Sturm Coating System Description For sale is a complete industrial Sturm robotic painting system manufactured in 2019. The automated coating system was used for the serial coating of components and originates from an industrial production facility. The used paint line includes, among other components, a paint booth, drying and cooling zones, conveyor technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification unit. Thanks to its automated system design, the robotic painting line is particularly suitable for industrial applications in the automotive industry, metalworking, and serial production. An inspection at the Hamburg site is possible by prior appointment. Technical Data & Scope of Delivery Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture of main system: 2019 Previous operation: Three-shift operation, condition consistent with age System components: Units, drying and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots, models KR 210L 150-2 / KR 210 2, manufactured between 2006 and 2012 Associated robot control cabinets 2x Yaskawa EPX 2900 robots 1x thermal post-treatment / exhaust air purification system, VeniaKab / RNV Condition Information Control technology: According to the plant maintenance department, the control technology is up to current technical standards Electrical and mechanical components: Predominantly in condition consistent with age or in good condition Cybersecurity Data Deletion Gkedpozka Sfjfx Aqija For security reasons, all hard drives from the robots and PC-based stations were removed. Dismantling Ex Works Hamburg There are two options for dismantling, loading, and transport: You carry out the dismantling and loading yourself on site. If you do not have the necessary personnel or equipment for dismantling, we can provide the complete dismantling, professional removal from the production hall, and loading as an additional service. The costs are calculated by prior agreement and according to the work involved. Please contact us in advance if you are interested. “Everything from a single source: We are pleased to offer suitable bank financing for your project.” komplett-konzept.leasingo.de You can find further new and used items in our shop. International shipping costs available upon request.

Condition: used, Year of construction: 1992, functionality: fully functional, total length: 6,500 mm, total height: 2,800 mm, total width: 3,000 mm, type of input current: three-phase, input voltage: 400 V, inner dimension length: 6,000 mm, Equipment: lighting, Complete powder coating system for sale. Consisting of a curing oven manufactured by Wurster, a coating booth with extraction system manufactured by Intec, and sliding rails and a moving system. Spray system for chemical pretreatment. Coating equipment and a large quantity of coating powder can be purchased separately. Approximately 200 cartons are available, 50% filled, totaling approximately 2 tons. Naturally, some of the powder is older. The price for the powder is 2500 euros net for collection. Gkodpfozmup Dsx Aqija

Condition: ready for operation (used), Year of construction: 2013, operating hours: 82,340 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 5, This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details. Gsdszd Dfvjpfx Aqijka - 2 units available- Control Unit: Siemens Sinumerik 840D- Number of Axes: 5-Axis (X, Y, Z linear axes and A, C rotary/swivel axes)- Pneumatic Operating Pressure: 6 bar- Control Voltage: 24 V- Nominal Power: 55 kW- Nominal Current: 145 A- Foundation Requirement: Reinforced concrete floor, quality EN 206, load capacity 2500 kg/m²- Workplace Lighting: Hall lighting of 250-500 Lux required- Ambient Operating Temperature: 10-35° Celsius- Operating Voltage: 400 V / 50 Hz AC- Pneumatic Connection Thread: ½"- Pneumatic Supply Line: Clearance width min. 1"- Compressed Air Quality: Drained and cleaned- Compressed Air Consumption: approx. 800 NI/h uncompressed- Noise Protection: Machine completely enclosed in a soundproof booth, interior illuminated. Sound insulation max. 20 dB(A) in medium to high frequency range with booth closed.- Safety Measures: Fully enclosed soundproof cabin, safety bumpers on the front edges of the tables, safety contact strips on the closing edges of the automatic sliding doors, limit switch protection on all sliding and hinged doors, movable partition between the tables.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Painting booth wall Schuko - 350 Ø - 1750 x 2000 mm - Year of manufacture: 1989 - with side deflector plates - throttle valve in good condition - fan dimensions: 800 x 1330 mm, height 600 mm Transport available at extra cost! Gsdpfxeytwlce Aqiska Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: used, functionality: fully functional, A set of 24 industrial axial fans from an active shipyard operation. The set mainly includes large axial fans with protective grilles (see photo), as well as two blue/black high-performance blowers. Suitable for: - Ventilation of halls/workshops - Drying of components, paint booths, renovation sites - Ventilation of construction sites, tunnels/tanks - Event technology, cooling, emergency ventilation - Shipbuilding / shipyards Preferably sold as a set (entire lot). Individual units can be sold separately by arrangement (approx. 100 EUR per unit). All devices are functional, with minor signs of wear typical for shipyard use. Originates from the shipyard operation of Strela Shiprepair GmbH (Stralsund). Technical data: - Quantity: 24 units Godpfjzawhwjx Aqiska - Design: Axial fan with protective grille - Application: Industry / construction / shipbuilding / event technology - Storage: in wire mesh box (included) - Connection: 230 V / 400 V (mixed assortment, check on site) Collection / Transport: Self-collection in Stralsund. Wire mesh box (steel) included on request. Shipping via freight forwarder on pallets by arrangement (several pallets). Total price 2,400 EUR net, negotiable, for all 24 units + wire mesh box; individual sale approx. 100 EUR/unit. Contact: [NAME], Tel. [TELEPHONE], [EMAIL]

Condition: ready for operation (used), Year of construction: 1999, operating hours: 4,280 h, functionality: fully functional, machine/vehicle number: 99422384, total height: 6,000 mm, total length: 20,000 mm, total width: 11,500 mm, Equipment: CE marking, Submitting a bid obligates the buyer to collect the item on time by the end of week 45! No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spray booths: 2 Drying section: 1 Godpfxsxgd Tls Aqiska Extraction walls: 2 MACHINE DETAILS Dimensions (L x W x H): 20,000 x 11,500 x 6,000 mm Electrical data Voltage: 400 V Power: 4,000 W Frequency: 50 Hz Operating hours: 4,280 h EQUIPMENT Various lowering zones CE marking Note: The rails visible in the images are not included in the scope of sale or delivery.