Used Sand Blasting Cabin for sale (6,268)

Condition: used, Year of construction: 1995, CATERPILLAR 5130 complete cab for CAT 5130, incl. electronics / control unit, as shown functional, very well maintained condition Location : Germany Hjdpfx Aowlinnjcrol Inspection and worldwide shipping possible More parts for CAT 5130 available For further information :

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 8,454 h, load capacity: 3,000 kg, lifting height: 3,850 mm, free lift: 150 mm, fuel type: diesel, mast type: other, construction height: 2,700 mm, power: 36 kW (48.95 HP), motor manufacturer: VW, DGUV certified until: 04/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Linde H 30 D-01 Diesel Forklift with the following specifications: Hedpfx Asyhn Rlscrol Operating hours: 8,454 Lifting capacity: 3,000 kg Lift height: 3,850 mm Overall height: 2,700 mm Year of manufacture: 2011 LINDE 3.0 ton diesel forklift with full cabin, good front tires - new rear tires, clear-view telescopic mast, side-shift, mini-lever controls, dual-pedal operation, front and rear lighting, fork length 1,200 mm. Including 1,000-hour service according to LINDE manufacturer specifications (with new timing belt and new water pump) and valid safety inspection (UVV test). The following options are available for an additional charge: - Cosmetic refurbishment - Different fork length Inspection, demonstration, and test drive available by prior telephone appointment. Sale exclusively to commercial customers. Subject to prior sale, errors, and typing mistakes. Your new forklift can be delivered cost-effectively with our own ramp low-loader (transport costs on request). For more information and offers, please visit our website.

Condition: used, Year of construction: 2001, Abrasive belt length, 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt design 1st unit: Cross belt sanding shoe 1st unit: Electronic segmented shoe Abrasive belt width, 1st unit: 150 x 4800 mm Drive, 1st unit: kW 2nd unit: Longitudinal roller design 2nd unit: Steel calibrating roller Abrasive belt length, 2nd unit: 2150 mm Abrasive belt width, 2nd unit: 1350 mm Abrasive belt speed, 2nd unit: 18 m/sec 3rd unit: Shoe unit design 3rd roller: Electronic segmented pressure beam SDS Sy Sanding shoe, 3rd unit: Electronic individual segments, 32 mm width Abrasive belt length, 3rd unit: 2150 mm Abrasive belt width, 3rd unit: 1350 mm Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor belt: Yes Feed speed, fixed: stepless 5-15 m/min Control: Touchscreen control Electr./pneum. belt oscillation: electric Hsdjxzi S Nopfx Acrel Infeed height: variable (lower table runs) Table stroke: electro-motor Digital table display Working height or feed table height: 880 mm Location: Nattheim

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, Year of construction: 2023, Equipment: air conditioning, = Additional options and accessories = - Leaf suspension = Remarks = Fuel tank: 400 ltr. Air conditioning Front axle suspension: 9.5 t Rear axle suspension: 16 t = Further information = Transmission: TipMatic 12.28OD, automatic Year of manufacture: 2023 Tyre size: 315/80R22.5 Suspension: leaf suspension Front axle: steered Number of cylinders: 6 Engine displacement: 10,518 cc Gross vehicle weight: 33,000 kg Hsdewynfzjpfx Acrel = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported by comprehensive after-sales services, such as the supply of spare parts and the provision of (local) training.

Condition: new, power: 185 kW (251.53 HP), fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Equipment: air conditioning, = Additional options and equipment = - Leaf spring suspension Hodpfexnwgujx Acrsl = Notes = Fuel tank: 120 ltr. Air conditioning Roof rotating beacon LEDs Headlight protection Foldable rear bumper DAB radio = Further information = Tyre size: 14.00R20 Suspension: Leaf springs Front axle: Steered Gross vehicle weight: 15,000 kg

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 4,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: air conditioning, = Additional options and equipment = - Leaf suspension = Notes = Fuel tank: 390 ltr. Air conditioning Hedpfx Acsw Nqt Esrel = Further information = Transmission: ZF16TX2240TO, automatic Year of manufacture: 2025 Tyre size: 14.00R20 Suspension: leaf spring Front axle: steered Gross vehicle weight: 20,000 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above Hsdpfoxtakmsx Acrel - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: CryoMax Eco 17Y110-01, New (demo machine) purchased and used once at a customer site for a short demonstration! Hjdsx Dkagepfx Acrol

Condition: used, Used machine Features and technical data: - Infinitely variable tilting of the horizontal grinding surface from 0 to 90° - Disc grinding attachment - Abrasive belt size: 2,250 x 150 mm - Extraction port diameter: 100 mm Hsdpfx Aey Ih Sdecrjl - Work surface: 850 x 150 mm - Belt speed: 16 m/s - Power: 1.1 kW - Roller diameter: 112 mm - Dimensions: 1,350 x 470 x 1,000 mm - Weight: approx. 80 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1984, Used machine Hedpfx Aow R Hh Uscrel Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: good (used), functionality: fully functional, From insolvency: Edge sander Samco Unilev 15 -- fully functional -- with oscillation Sanding belt 150x2170 mm Tables adjustable 0-30° 380 Volt Pneumatic belt tensioning 2 belt speeds Hedpfx Aey E Iwnscrol Weight 405 kg Space required approx. 1500x800 mm

Condition: used, Year of construction: 1996, operating hours: 12,171 h, BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Hedpfxownh Eqj Acrel Voltage 380V, 172Amp Revised by Boere in 2019 - Year: 1996 - Documentation available: No - Bottom sander: - CE certificate present: No - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Sanding pad present: No - Top sander: - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Structuring brush present: No - Sanding pad present: No - Voltage [V]: 380 - Current consumption [A]: 172 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1991, operating hours: 19,888 h, condition: used, - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 1844 - Operating hours: 19888 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodswydviepfx Acrjl Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1994, condition: used, - Year: 1994 Hjdpfxjwnhl Re Acrjl - Documentation available: Yes - CE certificate present: No - Serial number: 40640000 - Control: Conventional Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 400V, 14.5Amp. Hedpfx Aswnh Avscrjl 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) Hodpfx Ajywlfyecrsl - Transport weight [kg]: 566kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Hsdsvvkipepfx Acrjl

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Hodpfxsxnm Rce Acrjl Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark Hsdpfx Acjxfl Eaerel

Condition: new, Year of construction: 2024, Working width: 950 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Hodpfxsknyhlo Acrsl Height adjustment: electronic Workpiece thickness display: digital Control system: Fox 500 KTR Units: 1 1st unit: Combination unit for calibration and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite lining Deburring brush: no Motor power: 7.5 kW Extraction port: 140 mm Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Condition: new, Year of construction: 2023, Working width: 1100 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Number of units: 2 1st unit: Helically grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off for the roller 2nd unit: Combination unit with finely adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding shoe with graphite coating on an interchangeable insert and pneumatic on/off of the roller Segmented sanding shoe: elastic, sector spacing 56 Control system: FOX 500 KTR Dust removal brush: no Hodpfsirmg Ujx Acrjl Motor power: 15 kW Extraction connection: 2 x 140 mm Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Hodpfovnv Uhox Acrsl Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Features and technical data: with 2 combination units with 2 contact rollers, 1 x 65° shore, 1 x 85° shore and 2 air sanding shoes Sanding width: 1350 mm Abrasive belt dimensions: 1360 x 1900 mm Maximum workpiece thickness: 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at infeed Roller table at outfeed Infinitely variable feed speed: 2.5 to 12.5 m/min Hedsy Dkhgspfx Acrjl Weight approx. 3700 kg Availability: approx. May/June Location: Thuringia

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,616 h, load capacity: 2,500 kg, lifting height: 6,040 mm, free lift: 1,950 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, battery capacity: 620 Ah, battery voltage: 80 V, DGUV certified until: 04/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25 electric forklift with the following specifications: Operating hours: 6,616 Lifting capacity: 2,500 kg Lifting height: 6,040 mm Overall height: 2,750 mm Year of manufacture: 2015 STILL 2.5 ton electric forklift with fully enclosed cab, triplex mast with full free lift, fork positioner with side shift, good battery, four hydraulic levers, single-pedal operation, lighting compliant with StVZO, fork length 1,200 mm, battery charger included. Price includes service according to STILL manufacturer's specifications and valid UVV inspection upon sale. The following options are available at an additional cost: - Cosmetic reconditioning Hedpfsyhp Huox Acrol Viewing, demonstration, and test drive by appointment only (please call to arrange). Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift economically with our own low-loader with ramp (transport costs on request). Further information and offers are available on our website!

Condition: excellent (used), functionality: fully functional, power: 110 kW (149.56 HP), Year of construction: 1999, Infeed opening: 720 x 200 mm Rotor diameter x width: 1,000 x 700 mm Max. feed size: up to 70 mm incl. discharge chute incl. hydraulic unit Hsdpfx Asyxp Uuocrel incl. approx. 2.5 t of spare and wear parts Optional: suitable steel construction available