Used Saw Crack Machine for sale (84,337)

Condition: used, Bernardo CSM2000 circular saw-milling machine, in good condition, 3 kW, 315/30 mm, approx. 2200 mm cutting length, approx. 100 mm cutting height, approx. 500 kg Nodpox H Ufbefx Ah Uslk Prices subject to change, errors and misprints excepted.

Condition: refurbished (used), functionality: fully functional, Machine for face and back grinding of carbide-tipped circular saw blades with extraction and fire extinguishing system; machine will be overhauled in-house after order confirmation! Photos are sample images. Nlodpfx Asv N Eg Ajh Ujk

Condition: new, Saw shaft and saw bush Tool shaft and clamping bush Nlodpfx Aenladhoh Uek

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Nodoxdbzbspfx Ah Uolk Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Nledpfx Aef N Ngbjh Uek Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Condition: good (used), Year of construction: 1991, Saw Blade Chamfering Machine Manufacturer: Loroch Model: AK Year of manufacture: 1991 Njdpshwixdefx Ah Uslk For chamfering HSS and segmental circular saw blades 161225ä

Condition: used, Technical details: grinding wheel diameter: 240 mm saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically Nlodou Ng Edspfx Ah Ujk saw blade continue to move automatically grinding wheel diameter: max.: 240 mm driving motor for feed (0,37 KW) *

Condition: new, We offer you fully automatic circular sawing machines and complete sawing centers from the "Profilma", "KS", and "SW" series with blade diameters of up to 650mm. Loading magazines and unloading systems are tailored to your requirements. A high-performance extraction unit with oil mist separator completes the convenience package. Nsdpfx Ahox E U Dne Ujlk Contact us – together we will find the optimal solution for your production!

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations) Nljdpfxoxhdm Is Ah Ujk

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable, 1.0 / 1.6 kW Nodpfx Aex Exyaeh Ujlk 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,150 net, loaded free of charge!

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Nledeu Tqb Uopfx Ah Ujk Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: new, Year of construction: 2025, saw blade diameter: 600 mm, grinding wheel diameter: 30 mm, compressed air connection: 5 bar, New saw blade grinding machine - chip divider groove grinding machine. Grinding range approx. 120-600 mm diameter Saw blade tooth pitch max. approx. 22 mm Control: Siemens PLC with automatic shut-off after grinding process Grinding spindle: High-frequency spindle, 24,000 rpm, power 800 watts! Cooling: Minimum quantity lubrication Saw blade clamping: pneumatic Gearbox: oil-bath lubrication Saw blade thickness adjustment: via backlash-free preloaded ball screw Nlsdpfx Ahsqpdi Rj Uok Grinding stroke: via heavy-duty linear roller guide Accessories: - 1 set of reducing rings 16x22,25,32,40,50 mm - Circuit diagrams - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Compressed air connection: required for saw blade clamping (very low air consumption)

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm Nlodoglui Ajpfx Ah Uok tooth pitch 20 - 50mm

Year of construction: 2021, condition: used, machine/vehicle number: 2150801, max. clamping length: approx. 60 cm, with darkening cabin Nsdpfxjx Akkcs Ah Ujlk

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm Nlodpex H Uctofx Ah Uek engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Machining length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request. Njdpfod Rhzxox Ah Uelk

Condition: used, Technical data: Max grinding wheel diameter: 180 mm Indexing device for sharpening milling cutters Indexing device for sharpening circular saw blades Angle sharpening capability Manual feed Motor power: 0.5 kW Nodpfxjx Nf Ixj Ah Uolk Overall dimensions: Length: 850 mm Width: 800 mm Height: 1550 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, We offer machines, spare parts, and accessories for saw blade grinding machines of the types ECE 45 / EC 400 / EC 500 / ASG 1400 / ASG 2000 from the manufacturer "Schmidt Tempo". Thanks to our many years of experience, we can also support you with repairs of the above-mentioned machine types, including the supply of spare parts. NEW: Grinding spindles, used or new, available for ECE 45 / Freestyle, ECT 502, ECT 632/633, ASG 1400, ASG 2000, AS 9-12, AS 2-4, ASG 400/500, G400/500. If you have a specific requirement, please contact us by phone or email. Nlodoguxgpspfx Ah Uok

Year of construction: 1982, condition: used, Circular saw blade sharpening machine Loroch JLM 36 Njdpocq Nghofx Ah Uslk

Year of construction: 2019, condition: ready for operation (used), Main Drive Number of axis 2 This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine. Application Types Nlodpfx Ahox D It Dj Usk Welding

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg Nlodpfx Ahjvrvq De Ujk This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm Neded A Ttxspfx Ah Uolk - Processing length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Nedpjd Sr Sijfx Ah Ujlk

Condition: used, Circular saw-milling machine Bernardo FK2, good condition, 2.2 kW, 450 kg Nlodjx H Uigjpfx Ah Usk Price changes reserved; errors, misprints and typographical mistakes excepted.

Condition: used, Band saw shaping machine Vollmer CAS L Feed from left to right with support frame Nedjcvhubspfx Ah Uslk Auxiliary feed very good condition