Used Slitting Machine for sale (91,420)

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: xxx, Shank slotting machine for attaching a cutting tip to screws. The machine is in first-class condition and can be used immediately. Ibedpsu Rblhsfx Ag Nsc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, number of straightening rollers: 9, roller diameter: 36 mm, plate width: 400 mm, number of feed rollers: 2, Double decoiler with straightening machine, strip thickness 2.5 mm, strip width 400 mm, coil weight up to 1700 mm Ø and 2000 kg, control S7 Iodpfsxiyytex Ag Nsbc

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg Ibjdpfx Aexbyf Heg Nec - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm • Weight: 240 kg

Year of construction: 2013, condition: ready for operation (used), Working width: 1200mm, max. nut roll diameter: 1000mm, max. end roll diameter: 600mm, max. roll weight: 1500kg, min. roll width: 300mm, web tension: 50N-400N/axis, core inner diameter unwind/rewind: 152mm/76mm, speed: 500m/min, max. cuts: 32, products: painted aluminum: 25µm-70µm, aluminum laminates: 40g-150g/m², embossed aluminum: 105µm-160µm, underbridge space: 2000mm. Machine dimensions X/Y/Z: approx. 5731mm/5710mm/2652mm, control: Siemens PLC 7, operating hours: 5736h. Including spare lower knife shaft, sets of spacer rings, circular knives on sleeves including spare circular knives, hard-coated aluminum deflection rollers, rubberized smooth contact rollers, an optical positioning aid with spotlights, a handling trolley, a manually movable unloading frame, a mending table on the unwinder as well as area protection by floor scanner and a hood. Documentation available. On-site inspection is possible. Ijdpfsuhqc Iex Ag Njbc

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) Ibedeu Iucuspfx Ag Nec - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: new, Year of construction: 2024, Slitting Machine 100cm, 230V, 50Hz infeed width: 100cm Ibsdpoh Tytiefx Ag Njc for slitting the back of foil sheets, complete with sheet trap, adjustable scales, adjustable guide bars for easy infeed of sheets. Steplessly variable roller speed, with 2 blade holders.

Condition: new, We can offer you customized sheet metal bending machines (long folding benches) with a working length from 3 m, 4 m, 5 m, 6 m and 8 m in the material thicknesses 1 mm / 1.5 mm / 2 mm / 3.5 mm and with a depth of 1m or 1.25m (sheet width) Bending angle 145 or 165° Delivery time of the machines - approx. 4 months depending on agreement Matching slitting lines with coil system can also be customized Iodperdx Uyofx Ag Nebc For questions please contact us Currently also few used machines available The offer as well as the example pictures here are for information only and do not include any counter value

Condition: new, Year of construction: 2025, Slitting machine Ferro-Rez cuts maximum 1.250 mm width sheet metal. Ibsdpshgfarjfx Ag Njc Slitting machine is made of: Insert table with adjustable back gauge Rubber rollers for moving sheet metal 3 pairs of roller blades, maximal number of roller blades is 5. Automatic guillotine shears Sheet metal thickness Steel: 1,0mm with 3 pairs of knives Machine weight: 1.000 kg Touch-Screen panel with automatic mode. Delivery time: 2 moths

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: fully functional, total length: 4,350 mm, total width: 4,900 mm, total height: 1,880 mm, power: 30 kW (40.79 HP), 1. Main control: Weikoda PLC and human-machine interface, with automatic stop when counting meters, automatic detection of remaining quantity, and automatic speed regulation of line speed. 2.Winding tension: It adopts independent motor and PLC for follow-up control, with pre-tension system. The tension is automatically controlled by servo motor, constant Ijdowd Ig Hopfx Ag Nebc tension and taper tension. 3. Unwinding: Adopt one-piece three/six-inch universal shaftless loading and unloading, hydraulic lifting. 4. Correction system: Adopt domestic famous and high-quality correction device for edge control. 5. Traction: Large diameter precision traction steel roller, surface plasma treatment, dynamic and static balance, roller cylindricality ÿ±0.02mm, runout ÿ0.02. Pressure roller wear-resistant rubber wheel NBR Shore hardness 60~65°. 6. Cutting: The bottom knife is a ÿ105 diameter bottom knife, which adopts automatic knife arrangement, and the upper knife is a ÿ105 circular knife. 7. Low-voltage electrical appliances and pneumatic components: using imported original parts such as AirTac and Schneider.

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) Isdsf Epzgopfx Ag Nobc -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness aluminum (max.): 10 mm, coil weight: 30,000 kg, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness copper (max.): 10 mm, sheet thickness brass (max.): 10 mm, cutting speed: 100,000 mm/min, product height (max.): 6 mm, working width: 2,000 mm, total width: 6,000 mm, total length: 35,000 mm, total height: 3,000 mm, feed roller diameter: 156 mm, Professional Coil Slitting Line 0.3 - 3 mm x 1500 mm x 15 Ton We offer accurate and fast cutting & slitting for coil materials; Stainless Steel, Aluminum, Copper, Galvanized, Brass, and Bronze. BOSPORAS’s Cut to Length & Slitting Line Machinery is a certain solution for various Materials and Dimensions, for your customized projects with heavy coil industries. Easy Operation with High-Level Automation. High Quality and Maximized Efficiency with Minimized Operation Cost High Capacity with Compact Design Project-Specific Straightening Designs for Top Quality Surface Accuracy Precision Production with Material-Specific Quality Rollers and Transfer System High Quality Cutting without Scrap Automated Stacking System Solutions Double Head Hydraulic Expansion Decoiler with Transmission Box Ibjdpfxjwutlvs Ag Nsc Coil Car Match Leveler Slitting Head Hydraulic Shear Tensioner and Separators Hydraulic Expansion Recoiler Loop with Sensors Automated Hydraulic Bridges Exit Coil Car Quick Slitting Knife Change Coil Tilting Car

Condition: new, Year of construction: 2025, functionality: fully functional, coil weight: 15,000 kg, sheet thickness steel (max.): 4 mm, outer diameter: 1,600 mm, coil width: 1,600 mm, type of input current: AC, Coil Slitting Line is used to cut the wider coils into the much more narrow coil strips, in the given dimensions. Servo Steel provides cost-effective Coil Slitting Lines, in any characteristics, according to the customer requirements. Iodpfx Aovmgn Neg Nobc All parts of the Coil Slitting Line are manufactures in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Slitting Unit and Recoiler can be controlled from one point. The system is controlled by PLC system, set in the customer language.

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Ibsdpfx Agjxn Sf Sj Nec Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Ibedpfx Agokzi Ulj Njc

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Ibedpfxsxftqds Ag Noc Prototrak SMX CNC Control,

Condition: new, Year of construction: 2025, workpiece weight (max.): 12,000 kg, turntable diameter: 280 mm, overall weight: 120 kg, The Robotmover 20 is the ultimate solution for moving heavy loads such as industrial machinery, installations, or steel structures – 100% electric, so zero emissions and noise pollution. Work with unparalleled flexibility thanks to the wireless remote control and the ability to effortlessly change direction 360°. This compact electric mover excels at maneuvering through tight spaces, making it an indispensable tool in congested or confined environments. Thanks to the 48V-60Ah battery, the Robotmover ensures long-lasting operation, saving both time and labor. Whether you're moving equipment or heavy loads, this electric Robotmover is your reliable partner that streamlines your work and increases productivity. Flexible Operation: The wireless remote control provides infinitely variable drive with 360° direction changes. Ibedow I Rt Nopfx Ag Nec Strong Traction: The two powerful 1000W motors equipped with magnetic brakes produce a robust pulling force of 20 tons. High Load Capacity: The triple-bearing turntable effortlessly carries a maximum load of 12 tons. Long Battery Life: The 48V lithium-ion battery with a 60 Ah capacity provides 4-5 hours of use without frequent charging. Scope of supply: Robotmover 20, remote control, battery chargers Also available transport crate with garage, battery operated hydraulic jacks, fixed following rollers electric skates power skates machine mover robot mover jung lifting equipment hydraulic jacks

Condition: used, Punching machine Bograma Ibodpfx Agexlr Nro Nec Description: - Standard equipped

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Ibsdjxni Iqjpfx Ag Nsc Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Ibsdoxndrdopfx Ag Noc Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: ready for operation (used), Hereby we offer a unique Italian ice cream machine from lady B trittico. Works on 220v normal plug connection and on water ideal to take with you on a trip or camping! The Bravo Lady B is a compact pasteurization and cooling machine, specially developed for smaller companies such as restaurants, bakeries or ice cream parlors. It combines two essential processes: 1. Pasteurization in the upper vertical vessel, with an adjustable temperature of +65°C or +85°C, depending on the desired pasteurization process. 2. Cooling in the lower horizontal cylinder, in which the mixture is quickly cooled to the desired temperature. A special feature is the patented system with which the hot mixture is transferred internally - without contact with the outside air - from the pasteurization vessel to the cooling cylinder. This guarantees maximum hygiene and enables efficient production. • Maximum filling quantity: up to 2 liters • Power supply: 230 volts, 3.2 kW • Connection system: ready to plug in • Cooling system: water cooling can be connected to a normal tap • Weight: 95 kg • Dimensions: 63 x 36 x 59 cm Maintenance and parts are still available from lobbia refrigeration technology Carpigiani Telme Taylor Kalte rudi Bravo trittico ice cream machines pasteurization pasteurization Ibedpfx Aswgw Tbeg Nec

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2018) Serial Number: SLM00083 Year: 2018 Control: Protrak SLX CNC Condition: Used – excellent condition Technical Specifications: Swing over bed: 560mm Swing in gap: 935mm Gap in front of faceplate: 297mm (max) Swing over cross slides: 350mm Cross slide travel: 290mm Distance between centres: 3000mm Maximum cutting length: 2900mm Spindle bore: 104mm Spindle nose: D1-11 camlock Spindle taper: MT7 in bush Spindle motor: 11 kW (15 HP) Spindle speeds: 30 – 1800 rpm (2 ranges) Tailstock travel: 200mm Tailstock taper: MT6 Ijdpfx Agoxc Ipio Nebc Tailstock diameter: 105mm Bed width: 500mm Machine footprint (L x D x H): 5220 x 2150 x 1950mm Machine weight: 7400kg Features & Equipment: Protrak SLX control Drilling attachment Quick-change toolpost 3-jaw chuck 4-jaw chuck 3-point steady

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Ijdexg Tfqspfx Ag Njbc

Condition: new, functionality: fully functional, feed length X-axis: 510 mm, feed length Y-axis: 510 mm, feed length Z-axis: 510 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, 📄 Product Description The Tongtai SH-4000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. Iedpfexnizdjx Ag Nsbc ⚙️ Technical Parameters Strokes on X/Y/Z: 510/510/510mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Pallet size: 2 x (400x400mm) Maximum load on the table (pallet): 2 x 400kgs Maximum workpiece dimension (diameter x height): Ø 550 x H 800mm Spindle speed: 15.000 rpm Built in spindle motor: 18.5/26/37 kW Machine size (Width x Depth x Height): 1.750x5.060x2.720mm Machine weight: 8.700kgs Fanuc controller model 0i-MF with Manual guide i and 10,4''LCD monitor Tool shank: BBT-40 ATC with 60 tools CTS ( coolant through spindle): 70bar Chip Conveyor integrated type with trolley Oil Skimmer

Condition: excellent (used), Year of construction: 2018, turning diameter: 560 mm, spindle speed (min.): 1,800 rpm, turning length: 3,000 mm, XYZ Proturn SLX555 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2018) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides Max. Cross slide Travel 290mm Spindle Nose D1-11 Iedpfx Aexc Nmiog Njbc Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2018 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 6340kg Supplied with: 3 Jaw Chuck 4 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders Fixed Steady Interlocking Guards Auto Lubrication. Coolant. Worklight Tooling as Photographed We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79000 Machine Serial Number: SLM00083 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Ibsdpfx Asxawdkjg Nsc Manufactured | 2007 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.