Used Saw Motor for sale (26,325)

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Gbsdpfsuqk Azsx Abmel 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit Godpfx Aodzp T Dobmsbl - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 Gedpfx Absh Elztjmebl -Drive: 1.6 kW 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Gbedpfx Asxvpqbsbmsl

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 20 h, Equipment: adjustable boom, adjustable chassis, air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, SPECIAL PRICE – CLEARANCE SALE – ONLY 2 UNITS AVAILABLE! Gbodpfox Hhu Nex Abmol HT25 PRO Mini Excavator with 2.5 t operating weight, equipped for professional applications in construction, civil engineering, landscaping, and municipal sectors. ➡️ Special price due to stock clearance / B-grade equipment ➡️ Technically fully operational, ready for immediate use ➡️ Machine with up to 20 operating hours ➡️ Includes hydraulic quick coupler and 3 buckets (25 / 50 / 100 cm) ➡️ Cosmetic defects, storage marks, or transport damage possible The machine features a robust specification and is designed for demanding tasks. Standard steel tracks ensure high stability, excellent traction, and long service life, even in tough operating conditions. Get in, start, and work – this excavator is ready to operate immediately and works flawlessly. EQUIPMENT & BENEFITS: • Kubota D1105 diesel engine (original) • 14 kW continuous power / up to 18.4 kW peak • Water-cooled diesel engine • Standard steel tracks • Load-sensing hydraulics • Hydraulic flow rate: 61.6 l/min • Hydraulic pressure up to 25 MPa • Side-swing boom • Enclosed comfort cab • Heating and air conditioning • Ergonomic joystick controls • LED work lighting • Hydraulic quick coupler • Includes 3 buckets: 25 cm, 50 cm, and 100 cm TECHNICAL DATA: • Operating weight: approx. 2,500 kg • Digging depth: up to 2,370 mm • Dump height: up to 3,500 mm • Transport width: approx. 1,500 mm • Travel speed: approx. 2–4 km/h • Climbing ability: approx. 30° Price €15,000 net plus VAT Sales Notice: Sold as B-grade / special clearance item. The machine is fully functional, immediately operational, and is sold with a hydraulic quick coupler and a set of 3 buckets (25 / 50 / 100 cm). Cosmetic defects, storage, or transport damage may be present. Operating hours up to 20 hours. Location / Delivery 📍 Location: Rheda-Wiedenbrück 🚚 Delivery throughout Germany and Europe available at extra cost 🔧 Inspection available by appointment Only 2 machines left – while stocks last. Contact us now to secure the special price and start working immediately.

Condition: new, I am offering a brand new Siemens SIMOTICS motor (1FE series) – a professional servo/spindle motor designed for inverter duty. This is a high-grade industrial motor, commonly used in CNC machine tools, delivering high power, precision, and reliability. The motor comes from warehouse stock (New Old Stock – NOS), unused and stored in original Siemens packaging. ⚙️ Technical Data Manufacturer: Siemens Series: SIMOTICS Gsdpsyxqmxefx Abmjbl Model: 1FE1114-6WW11-1BN2-Z-T56 Power: 20.9 – 26.8 kW Voltage: 425 V Current: 58 / 85 A Nominal speed: 1000 rpm Max speed: 6000 rpm Max torque: 330 Nm Duty cycle: S1 / S6-40% Cooling: water-cooled Temperature sensor: KTY84-130 Protection rating: IP00 Insulation class: F (155°C) 📦 The set includes: Siemens SIMOTICS motor Original Siemens packaging (as shown in the pictures) 📌 Key advantages: ✔️ Condition: NEW (warehouse stock / NOS) ✔️ Made in Germany ✔️ Genuine Siemens industrial quality ✔️ Ideal for CNC / machine tools / automation ✔️ High power and torque

Condition: new, functionality: fully functional, overall weight: 9 kg, 56 units available. Export is possible. Gsdpfx Ajyyw Eqobmsbl

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic Gedpfowxmhljx Abmsbl 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: like new (used), functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 2,960 rpm, type of input current: AC, ATB Nordenham ATEX Rated 45kW Motor Type: CD 225M-2 Gbjdpfxjyq Sf So Abmjl New, unused, ex stores stock

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: EZSM6D030AZAC, overall weight: 8 kg, total length: 615 mm, total width: 73 mm, total height: 66 mm, input voltage: 250 V, type of input current: AC, feed force X-axis: 400 N, stroke length: 300 mm, tool weight: 3,000 g, actuation type: electric, Item # EZSM6D030AZAC, EZS Series Straight Type Electric Linear Actuator - Slide (74 mm (W) x 66.5 mm (H), Stroke Length: 300 mm) (AC Input) Compact, High Rigidity Electric Linear Slides with simple, dust-resistant structure providing the high response, low vibration and hunting-free operation of a stepper motor in an electric linear slide. A wide variety of options to suit the equipment space and environment, including straight type and reversed motor type. Equipped with AZ series stepper motors with battery-free absolute encoder Positioning information can be known without a sensor High reliability using closed loop control Reduced motor heat and reduced energy consumption through high efficiency design Gbodexxl Eajpfx Abmsl Connection Cables Required (sold separately*)

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, number of shelf rows: 10, Due to the closure of our sawmill, we have various machines and accessories for sale (see pictures). If you are interested, please feel free to contact us. - 45 kW motor for chipper Gbodpfx Abjyi Erpomjl - Double-sided cantilever racking, 15 m long

Year of construction: 1996, condition: used, Hydraulic motor Year of manufacture: 1996 Gbjdpfxoy Dvrws Abmsl

Condition: new, power capacity / kW Gbedpsig A Ekjfx Abmol volt / V ampere / A total power requirement 12,6 kW MOLL engine Type: Y2PE-160MA2B3 / ML1907010375 V: 400/690 A: 19.6 / 11.3 / 19.5 Speed: 2950 / 3540 Total power: 11kW / 12.6kW Condition: New

Condition: new, power capacity / kW volt / V ampere / A total power requirement 42,5 kW MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011999 Gbsdpfx Aeif Sc Djbmel V: 400/690 A: 64,0 / 37,1 / 64,4 Rpm: 2970 / 3564

Condition: new, power capacity / kW volt / V ampere / A total power requirement 21,3 kW MOLL engine Type: Y2HE-180M4 PTC / MOLL130920373 Gbsdpfjuddlhex Abmol V: 400/690 RPM: 1470 / 1764 Total power: 18.5kW / 21.3kW Condition: New

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, cutting width (max.): 400 mm, saw blade diameter: 800 mm, rotational speed (max.): 800 rpm, total length: 13,500 mm, total width: 5,400 mm, total height: 2,500 mm, cutting length (max.): 6,000 mm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Gbsdsw Nbhmopfx Abmol Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: used, Electric motor, reversing motor, induction motor, reversible motor -Manufacturer: Sesame Motor Corp., Electric Motor Reversible Motor -Type: unfortunately without type designation -Speed: approx. 1480 rpm -Shaft: Ø 11 x 20 mm Gedpfx Aop Udipebmobl -Quantity: 3x motor available -Price per piece -Dimension: 150/90/H90 mm -Weight: 3.0 kg/pc.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, stepper motor driver -Manufacturer: Oriental Motor, 2-phase stepping motor driver stepper motor driver unused original packaging Gbsdom Ui H Iopfx Abmjl -Type: CSD2120-T -Dimensions cardboard: 140/90/H70 mm -Weight: 0.2 kg

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm -Weight: 1.1 kg/pc. Gbsdsm Ui Idjpfx Abmel

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor Gbsdpfx Abehwgdxomol -Manufacturer: Oriental Motor, Vexta servomotor stepper motor from Tiromat 3000/430 vacuum packaging system -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price: per piece -Dimensions: 97/57/H57 mm -Weight: 0.2 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm Gsdeq Dr Scjpfx Abmobl -Weight: 0.3 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, two-phase stepper motor Gbedpfx Aoq Adpiobmjl -Manufacturer: isert-electronic: two-phase stepper motor 1.8° -Gearbox: 3465 A2411-9212-A2 -Engine: Oriental engine type 2GK9K -Shaft: Ø 8 x 27 mm -Quantity: 6x stepper motor available -Price per piece -Dimension: 135/60/H60 mm -Weight: 0.9 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Motor comes from a Weisser Heilbronn Type 29 CNC lathe -Speed: 2000 rpm -Power: kW -Design: B5 -Shaft diameter: Ø 30 mm Gedpfx Absff Aqzemjbl -Quantity: 1 piece available -Dimensions: -Weight: 20 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg Gbsdpob A N Aljfx Abmol

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg Gbedsb A N Akepfx Abmol