Used Schneider Airmaster for sale (191)

Condition: used, Stack paper cutting machine, guillotine cutter, flatbed cutter SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Rubber, paper and veneer shear Machine no. 60178 Year of manufacture 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Feed height: 140 mm Back gauge: max. 1550 mm Knife drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade stroke release - Automatic pressing by pressure clamp holds the paper stack on the table - Manual clamp and stroke release via foot pedal (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electrical control unit (not operational), no wiring diagrams, no user manual Lasdpfx Aodzqnyeh Ujk - Back gauge adjustment via servo motor (motor, controller, and control unit present, not operational) Required space (L x W x H): 325 x 270 x 165 cm Space required for transport without disassembly: length 330 cm x width 270 cm x height 175 cm Space required for transport with disassembly: length 550 cm x width 220 cm x height 175 cm (machine + separate table) Machine: length 270 cm x width 190 cm x height 175 cm Side table: length 240 cm x width 170 cm x height 120 cm Weight of assembled machine: approx. 5000 kg (excluding the transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate the machine is stored on. (Price for the steel plate: 900 EUR net)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 750x705x1800 mm Weight 170 kg Lodpfov A Hv Sex Ah Ujak Total power requirement 4 kw

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Lsdpex Ih D Tefx Ah Usak

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Panel with Housing -Type: HMISTO715 -Voltage: DC 12-24V -Dimensions: 150/145/H160 mm -Weight: 1.4 kg Lodexxvkajpfx Ah Uoak

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 2,400 kg, Manufacturer: APC by Schneider Electric Model: MGE Galaxy 9000 UPS Article No.: 3400640200 Year of Manufacture: 2011 Weight:2400 kg Location: United Kingdom Technical Specifications UPS Type: Modular, double-conversion online Rated Power: 900 kVA / 810 kW Input Voltage: 380/400/415 V, 3W + PE Output Voltage: 380/400/415 V, 3W + N + PE Frequency: 50/60 Hz (Input 45–66 Hz) Rated Current: 1299 A Laodpfxsw Tbl Hj Ah Ujk Efficiency: high-efficiency modular architecture Standards: ISO9001 manufacturing, CE certified Condition Removed from data centre operation Maintained under service contract Good condition, available for immediate sale Inspection possible upon request

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Fully mounted and previously operational on-site, this complete hydrogen pilot plant includes a range of high-quality mechanical systems. Please refer to the extensive equipment list for details. Note: The sale is ongoing, and the list may not be complete — some parts may no longer be available. Lsdsxlch Eepfx Ah Uoak

Year of construction: 2024, condition: used, New demonstration machine! List price: €13,585. #4152018486 Description: Durable, directly driven compressor blocks. Maximum user convenience thanks to the AIR ENERGIE CONTROL 3+ electronic control system with direction of rotation monitoring, display of operating hours, maintenance schedule, service notifications, load hours, etc. Equipped with integrated refrigeration dryer: DK 1200 SMART refrigeration dryer mounted on tank. Turnkey installation thanks to integrated dryer. Optimally adapted to actual air consumption via speed regulation. Simple operation and maximum user comfort via the user-friendly electronic control system. Requires minimal space thanks to compact dimensions. Significant time and cost savings in maintenance due to easy access to all service parts and direct drive. Extremely quiet operation due to sound-insulated housing. Easy installation of exhaust duct thanks to top-mounted exhaust outlet. Prevention of costly damage at start-up due to integrated direction of rotation monitoring. TIP: Screw compressors with integrated refrigeration dryer mounted on tank are extremely space-saving and guarantee high air quality. Technical data: Final compression pressure: 12.5 bar Working pressure: 5-12.5 bar Free air delivery at working pressure (ISO 1217): 270-1,224 l/min Compressor speed at 7 bar: 5,023 rpm Rated drive motor output (V/Hz): 7.5 kW (400V/50Hz) Drive motor protection class: IP 55 Sound pressure level (LPA1 DIN 45635 T13): 64 dB(A) Air outlet connection: 3/4" i Tank volume: 500 l Laodeutux Sopfx Ah Uok Dimensions (W x D x H): 1935 mm x 655 mm x 1680 mm Weight: 427 kg Technical data – Refrigeration dryer DK 1200 SMART: Flow rate at pressure dew point +3°C: 1200 l/min Pressure: 7 bar Pressure loss: 0.25 bar Voltage: 230V/50Hz Power consumption: 0.23 kW Air connection: 3/4" a Refrigerant filling: R134a Location:

Year of construction: 2025, condition: new, Dimensions (L/W/H) 945x705x1800 mm Weight 206 kg Laedev A Hwcopfx Ah Uok Total power requirement 4 kw

Condition: used, This listing is for the Schneider Electric APC Smart RT2000 UPS The unit is in full working condition and is ready for immediate release Lsdpfx Aexv D Hqsh Ueak The APC Smart-UPS RT 2000VA is a rack mountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load.

Condition: good (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB, isolated gateway Manufacturer: LCL, PCB isolated gateway made of Pro-face monitor Schneider Electric GP-4301TW Lodpfx Ahoxxp Hnj Ueak -Type: -Quantity: 4x circuit boards available (1x with accessories, see photos) Price: per piece -Dimensions: 130/125/H20 mm / 130/125/H25 mm -Weight: 0.1 kg / 0.3 kg

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Laodpfx Ahsbyhvro Uek Technical specifications Pressure 10 bar Suction capacity 510 l/min Filling capacity 390 l/min Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg subject to prior sale

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Equipment and technical data: Laodpewka E Usfx Ah Uek - with dual-lift spindle, pneumatic - mandrel diameter: 40 mm - with large table length: 2500 mm - with extendable frame support - with milling fence featuring Panhans metal jaws and fine adjustment Availability: short-term Location: Röllbach

Year of construction: 2023, condition: used, New demonstration unit! List price €2,986 net! Technical data: Pressure: 10 bar, Suction capacity: 650 l/min, Effective delivery rate: 520 l/min, Drive power: 4.0 kW, Speed: 1025 rpm, Tank capacity: 2 x 90 L, Weight: 175 kg, Noise level: 83 dB(A), Air outlet: 1/2" internal, Dimensions (W x D x H): 1200 x 800 x 1240 mm. Design: Belt-driven piston compressor mounted on two horizontal pressure vessels, fully assembled on a safety pan, including complete equipment. The ready-to-connect unit includes: - Pressure switch for fully automatic operation - Start-up relief and motor protection - Safety valve - Non-return valve - Pressure gauge. The belt-driven compressor unit allows all components to be clearly arranged, and components subject to maintenance can be easily removed or installed. Location: Rieth. Ljdpfx Ahjvxxvie Ueak

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1070x495x895 mm Weight 80 kg Total power requirement 3 kw Ledpfx Aov A Hv Esh Usak

Condition: used, This listing is for the Schneider Electric APC Smart UPS RT2000 The unit is in full working condition and is ready for immediate release The APC Smart-UPS RT 2000VA is a rackmountable, double-conversion online UPS designed for high-density power protection. It features a 2U form factor, providing pure sine wave output, which is recommended for servers using active power factor corrected (PFC) power supplies. The unit operates at 230V and offers a battery runtime of approximately 3.9 minutes under full load. Ljdpfxjxv Dywo Ah Usak

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Easy Panel PC, Performance 18.5" -Type: HMIPSPS952D1X01 -Voltage: DC 12-24V -Dimensions: 470/55/H295 mm Laedpfjxw R I Rex Ah Uok -Weight: 4.5 kg

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Ljdpfx Ahovmivcj Ueak Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: used, Schneider SF 60 Envelope Feeder: Single-sheet envelope feeder, year of manufacture: unknown, in good condition, immediately available. Lasdpsx Af T Eofx Ah Ujk Please request a quotation. If you are interested, we are also happy to inform you about other machines in our inventory. You are welcome to arrange an appointment to inspect the machine at our premises.

Condition: used, Year of construction: 2001, Ref:10930 . 2001 Schneider Senator 78 E-Line Guillotine 78cm guillotine in excellent condition Comprising: Stainless steel side tables left & right with air Stainless steel central air bed E-Line colour TFT display with graphic operator guidance Soft keypad programming with static back gauge Computer programme with 99 programmes, 999 cuts instructions Metric/Imperial measurement scale Motorised back gauge / fast and slow speed with micro-adjustment Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 10 beam light barrier with FFM guarding 2 knives Tools and manuals. Specification: Ljdpev Dg Idofx Ah Uoak Cutting width, Max: 78 cm Clamp opening, Max: 11.5 cm Feed depth, Max: 78 cm Power required (main drive) : 1.9 kW

Year of construction: 2025, condition: new, Dimensions (L/W/H) 820x410x810 mm Weight 64 kg Ledov A Hvxjpfx Ah Ueak Total power requirement 2,2 kw

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and Technical Data: - Designed for all window tool systems up to 400 mm tool diameter - Thanks to the standard braking devices (foot brake for slot spindle, automatic electronic safety brake for saw), the machine can be stopped within a few seconds - The protective hoods for the slot spindle and cross-cut saw are designed so that tools can be easily and conveniently changed without having to remove the hoods themselves - The cross-cut saw can be conveniently adjusted from the operator’s position using a quick adjustment. A six-position turret allows for fast changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height via a conveniently positioned handwheel with 0.1 mm graduations - The stable roller table, in combination with hardened and ground guides, can be moved easily with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm Lajdpfx Ahexymfds Uok - Slot spindle height adjustment: 100 mm - Extraction nozzle: 120 mm - Cross-cut saw motor: 2.2 kW - Cross-cut saw speed: 2950 rpm - Saw blade mount: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo LAS stop Weight: approx. 600 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible. Ljdpfox Elz Rox Ah Uoak

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Ledpfxovz Ez De Ah Ueak Weight 431 kg Total power requirement 7,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Weight 451 kg Lodpfxjvz Epbs Ah Uoak Total power requirement 11 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Laodpfxevz Ekls Ah Uek Weight 426 kg Total power requirement 5,5 kw