Used Schroeder for sale (74)

Condition: not inspected (used), Schröder double-jacketed pressure tumbler, steam tumbler, heat tumbler, 2500 liters Preheating or thawing of meat possible For heating, the tumbler must be connected to a steam generator Water vacuum pump Machine is offered as shown in the photo. All cables are labeled, which simplifies electrical connection. The machine was in operation until the last day and had to be dismantled due to its width. It was disassembled by the sausage manufacturer's in-house technician, and all electrical cables were numbered. Godpfx Ajwg H D Njg Nsuh The machine was dismantled in working condition. We have not reassembled or tested the machine.

Year of construction: 2011, condition: excellent (used), Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used year of construction: 2011 Gusdpslnixiefx Ag Njh useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Seldom used guillotine shear, only occasionally for 1.5 mm sheet thickness. Stroke rate: 56/min. Capacity (Rm 400/mm): 3.5 mm. Rated power: 4.0 kVA. Weight: 860 kg. Guodpfx Agjxal Uwo Neh

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 3 mm, cutting length (max.): 1,020 mm, Mechanical guillotine shears Fab. SCHRÖDER Typ. MHSU 1020 x 3mm Year 2000 Technical data Make: SCHRÖDER Type: MHSU 1000 x 3mm Year of manufacture: 2000 Sheet width: 1000 mm Sheet thickness: 3 mm Gjdpfxsulrx To Ag Neuh Space requirement: LWH approx. 1.40 x 1.50 x 1.30 m Weight: approx. 720 kg Equipment - Manual backgauge - Operating instructions - Cutting edge lighting - Continuous hold-down device with hard rubber strip - Machine feet All specifications without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: reconditioned (used), functionality: fully functional, Roll Divider and Rounder Machine Fortuna Automat Grüße 4 E 30-part roll press Gjdjxcqgdjpfx Ag Njuh With moulding deactivation Dough input: 1200–3300 grams Dough piece weight: 40–110 grams Knife head electrically tiltable to the rear for cleaning Dividing head/knives newly reworked Knives made of stainless steel Machine was completely overhauled and repainted 2 years ago Moulding plate and operating manual included

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Guedpfxov Tzpho Ag Noh Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm Gujdpetpnldefx Ag Noh - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: reconditioned (used), Year of construction: 1997, machine/vehicle number: 06143797, Schröder 61 Needle injector Gujdsrw Araspfx Ag Noh Year of construction 1997 Suitable for meat with bone and fresh meat 60 cycles per minute with 40mm advance per stroke Hourly capacity 3000 KG

Condition: ready for operation (used), Schröder 204-10/2 Folding Machine Year of manufacture: 2012 Capacity: 2.0 mm Working length: 1020 mm Upper beam stroke: 220 mm Lower and bending beam adjustment: 60 mm You are welcome to arrange an inspection visit. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued upon provision of a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks mentioned are property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications or errors in the item description may occur and remain reserved. Godpsxfr R Nefx Ag Nsuh

Condition: excellent (used), Year of construction: 2011, Mechanical swing bending machine Fab. Schröder Typ. MAK 3 4000 x 1,5 Year 2011 Technical data Make: Schröder Type: MAK 3 Year of manufacture: 2011 working length: 4020 mm Power at 400 N/mm²: 1,5 mm stroke upper beam: 250 mm lowering of bending beam: 80 mm angle: 0 - 180 power requirement: 6,0 kW weight: 4860 kg Dimension: L 5,2 x W 1,2 x H 1,7 m Equipment Gsdpfx Aemkidveg Nouh - Control POS 400 NC - piece counter - foot switch - rail quick clamping system - manual back gauge 750mm, optional - 1x set of split cutting tools 90mm - 2 pcs. bending rails 10mm, 25mm - hydraulic upper tool clamping All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Schröder MHSU 3000 In top condition and with freshly sharpened blades! Capacity: 2mm steel sheet (aluminium, copper, and zinc with greater thickness) Working length: 3045mm Connection voltage: 400V The machine is equipped with: Gujdpfxew Tyyce Ag Noh - a 75cm back gauge - a foot pedal The price is €14,650 net, plus VAT, totaling €17,433.50. You will receive an invoice with VAT shown separately.

Condition: good (used), Year of construction: 1991, Schröder Kombinator emulsify-kombinator, type: EMK 01/3500, building number: 119567, year of construction: 1991, dimensions: 2900 mm x 500 mm x 800 mm. Guodpfjun Tr Tjx Ag Njh Model: Crystallizer Capacity up to 2.000 kg/h depending on product Product Margarine of shortening Year 1991 Power 7,5 kW Pressure Up to 20 bar Weight ± 1500 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 121841, Offer 25317 Gsdpfoxc Ei Hjx Ag Nouh Technical data: - Max. working width: 2020 mm - Max. material thickness: 3 mm - Strokes per minute: up to 32 1/min - Cutting angle: 2.0° - Motorized backgauge: 5 - 500 mm - Front material chute - Rear area safety guard - Extendable front material support - Electric foot pedal - Single stroke or continuous stroke selectable - Drive: 400 V / 4 kW - Required space: approx. W 2450 x H 1180 x D 2300 mm - Weight: approx. 1300 kg

Condition: used, Year of construction: 2010, sheet width max. 1500 mm plate thickness 2,5 mm serial number 150393 weight 1300 kg +++++ Gusdpoiay H Tsfx Ag Njh Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schröder. Device features: - Cuts up to 2.5 mm steel according to the nameplate - Working length: slightly over 2.5 m - Back gauge: 750 mm Godjw U Sryepfx Ag Nouh - Side/winkel stop - Sheet metal chute - See pictures: machine has not been refurbished - Foot pedal - Weight: see image - In proper condition You will receive an invoice with VAT shown separately. Forwarding/shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and test run possible by appointment via phone. Payment in cash upon collection. If you have any other requests, please call me briefly – thank you. Collection should take place within 8 days after end of auction. Location: 97261 Güntersleben Item number: 250801

Condition: excellent (used), Year of construction: 1992, working width: 1,020 mm, sheet thickness steel (max.): 4 mm, stroke length: 250 mm, Motorized folding machine Fab. Schröder Typ. MAK II 1000/4,5 year 1992 Technical data Make: SCHRÖDER Type: MAK 2 Year of construction: 1992 Effective length: 1020 mm Capacity at 400 N/mm² 4.5 mm Stroke upper beam: 250 mm Adjustment of bending beam 50 mm Bending angle: max. 135° Weight: approx. 2,140 kg Dimensions: approx. L 2.10 x W 1.90 x H 1.50 m Equipment - Manual backgauge with support table: 10 - 1000 mm - Double foot switch - 45° focus rail - Bending rails 10 mm, 25 mm All data without guarantee Gjdpfx Aeugum Ijg Nouh A demonstration is possible at any time in our showroom.

Year of construction: 2000, condition: ready for operation (used), Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible. Godpfxjv Extuj Ag Nouh

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm Guedow Sthdepfx Ag Neh - Weight approx.: 3500 kg

Condition: used, You are bidding here on a branded guillotine shear from the renowned German manufacturer Schröder. Machine specifications: - Cuts up to 4 mm steel (see type plate) – suitable for aluminium and other materials - Hydraulic cutting (not electric) – higher quality machine - Working length: approx. 2.5 m - Support arms positioned in front of the machine due to space constraints - Rear gauge approx. 1 m - Side/Wedge stop - Work surface with brushes (protects the sheet metal) - Sheet support system - An invoice with VAT shown will be provided - Optional: 2 pairs of spare blades Also available: Press brake from the top manufacturer RAS (Reinhardt Maschinenbau Sindelfingen) - Bending length: slightly over 2 m - Sheet thickness: 3.5 mm steel - Swiveling control panel - Weight approx. 2300 kg - Depth stop and additional rails (see pictures) - Segmented upper beam (new price approx. €6,000 – just for the segments) The press brake comes from a public institution, regularly serviced and well-maintained. Transport can be arranged upon request. Free loading as shown in the photos. Inspection and test runs are possible by prior telephone arrangement. Payment in cash upon collection. If you need any further assistance, please call me – thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Free loading as shown in the photos. Inspection and test runs are possible by prior telephone arrangement. Godpfx Agsww E Tkj Nsuh Payment in cash upon collection. If you need any further assistance, please call me – thank you! Collection should take place within 8 days after the end of the auction. Location: Eisingen (3 minutes from the motorway) Article number:

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Godpfet R Tq Iex Ag Neuh

Condition: used, Year of construction: 2008, machine/vehicle number: 150344, Order No. 25052 Technical Specifications: Gujdpfxsv Rbq Te Ag Neh - Maximum working width: 2020 mm - Maximum material thickness at 40 kg/mm² strength: 2 mm - Bending angle adjustment: 0 - 135° - Upper beam clamping via eccentric lever + foot pedal - Maximum opening width/stroke of the upper beam: 100 mm - Height adjustment of the lower beam: 25 mm - Space requirement: approx. W 2950 x H 1200 x D 800 mm - Weight: approx. 1450 kg

Condition: good (used), You are bidding on: a branded folding machine (Abkantbank) from a very good and well-known manufacturer – Schröder Device features: - Schröder folding machine - Rail bends cleanly – test possible; barely used, from private owner Guodpfswc Nz Nox Ag Noh - Angle indicator - Bending length slightly over 2 m - Sheet thickness 1.5 mm (steel); aluminium, zinc, etc. up to 2 mm - Standard rail – radius for aluminium, zinc is optionally available! - Foot clamping mechanism - Optional: backgauge, additional rails - Schröder guillotine shear - Working length 2 m - Sheet thickness 1.25 mm (steel); aluminium more - 500 mm backgauge - Extendable sheet support - Optional additional accessories and tools available, such as tube bars, tool holders, etc. - Suitable electric and manual guillotine shears available on request – please inquire for set price, I will configure accordingly. Important! Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing, such as rails, backgauges – everything related to sheet metal and steel work: folding machines, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessory parts (forming roll, beading rollers for gutter forming, backstop, etc.), as well as various hand tools and spare parts from many top manufacturers in the shop. I am always available for questions. You will receive an invoice pursuant to §25a German VAT Act (UStG); VAT is included in the amount. Free loading possible – weight approx. 950 kg and 650 kg. Inspection and testing are possible and encouraged after scheduling a phone appointment. Payment in cash upon collection. Benefit from our experience and expertise; we are happy to advise you at any time. Collection by the buyer (or a freight company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: Item number: Schröder folding machine & guillotine shear 250304

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Gedpstphubsfx Ag Nsuh

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190459, Offer 25316 Technical Data: Gjdoxc Egrspfx Ag Nouh - Max. working width: 2,040 mm - Max. material thickness at 40 kg/mm² tensile strength: 3.0 mm - CNC position control POS 400 for 9-program memory - Bending angle adjustment: 6° to 135° - Maximum opening width / stroke of the upper beam: 250 mm - Height adjustment: - Bending beam: 50 mm - Lower beam: 50 mm - Upper beam drive: 400 V / 2.2 kW - Bending beam drive: 400 V / 2.2 kW - Electric foot switch - Manual backgauge - Segmented box and pan (gooseneck) tooling - Required space: approx. W 3,100 x H 1,450 x D 2,200 mm - Weight: approx. 2,800 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 6229, Offer 24483 Guodpeu Eq Rpsfx Ag Njh Technical data: - max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle setting preselectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - of the bending beam 50 mm - of the lower beam 50 mm - E. foot switch - Upper beam drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg