Used Stamping Machines Potsdam for sale (66,091)

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Nledpfxexp Ntvj Afwjf Photos show machine in production before reconditioning

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr Nledpjy T Ngtefx Afwjf High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 line hologram capability : Full impression and register tested before supply Carries distributor's warranty

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Nodpozt Idujfx Afwelf Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Nodpfx Afeztz D Uswolf Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Nedpfjn Smg Tjx Afwelf Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: ready for operation (used), functionality: fully functional, RAPID Machinery Generation III automatic hot foil stamping machine, designed for industrial printing and packaging applications. The machine features two heated stamping heads, digital temperature control and continuously adjustable speed. Heavy-duty construction ensures stable and reliable production. Technical Specifications: • Manufacturer: RAPID Machinery Co. (Sydney, Australia) • Machine type: Automatic hot foil stamping machine • Series: Generation III • Number of stamping heads: 2 heads • Head positioning: adjustable left / right • Maximum stamping width: approx. 300–350 mm • Maximum material thickness: approx. 0.1 – 1.5 mm • Processable materials: paper, cardboard, plastic substrates • Temperature range: approx. 80 – 200 °C Nlsdpfsyghr Hjx Afwof • Temperature control: independent digital control per head • Operating speed: continuously adjustable • Operating modes: automatic / single pull • Counter system: digital batch counter • Drive system: electric • Power supply: 3-phase, 400 V, 50 Hz (typ.) • Safety equipment: emergency stop, CE-compliant safety system • Frame construction: heavy-duty industrial steel frame • Country of manufacture: Australia

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Njdpfx Afozv Nkbswjlf Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Nodpfxozv Niws Afwolf Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. Nsdpfx Afjzph N Aowslf The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: ready for operation (used), functionality: fully functional, Hot stamping machine Semi-automatic Mechanical sliding table Nljdjzq Uuujpfx Afwsf Temperature and timer control Stamping plate size: 35 x 24 cm Various replacement plates In addition, inking unit included (disassembled)

Condition: used, Year of construction: 1978, Gierlich P 6000 Hot Foil Stamping Machine Stamping force: 6,000 kp Stamping area: approx. 250 × 150 mm Nlsdpfx Afjzvxyfowjf Electrically heated embossing plate Power supply: 220 V Power: 1.75 kW Suitable for hot foil stamping and blind embossing on paper, cardboard, leather, synthetic leather, and plastic. Training machine—in excellent condition—has produced only 2,510 books Available on short notice

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Njdjziqtdspfx Afwelf

Condition: used, LDV PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Nodezwgg Nepfx Afwolf Model MFMC-12000 , Laser Power 12 KW.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Nledpfxsztn Nks Afwof Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Nedpouyk S Asfx Afwjlf

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units 3 Standard slide units Nlodpel D N Hvsfx Afwof Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Nodpezgui Dofx Afwjlf Used machine, in good visual condition. Condition matches the photos.

Condition: excellent (used), Year of construction: 1977, equipped with: 1 pce. BIHLER auccustic cabine 1 pce. gripper feeder system right hand side Nlsdefzr Aqspfx Afwof 1 pce. Eccentricpress 70 kN 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. Nedpfx Afszvmy Hjwjlf 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm Nlsdper D N Eqjfx Afwsf feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 1983, equipped with: 1 Feeding system right hand side 1 Eccentricpress 250 kN 5 Slide units working range: wire diamter range: 1,5 - 5,0 mm stripmetal width: max. 50 mm feeding length: max. 200 mm Nsdpfxovuzvdj Afwjlf output: max 450/min.

Condition: used, Year of construction: 1989, For sale is a robust GIERLICH hot foil stamping machine in good condition. Nledpfx Afjzi U Thewof Technical data: Manufacturer: GIERLICH Type: PE 1200-2400-2P electronic Year of manufacture: 1989 The machine can be inspected by appointment near Solingen. Sale from foundation. Subject to prior sale. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm Nledetzlzaspfx Afwof feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side Nlsdpfx Aorpk Axsfwef 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Njdpeyi Hpcefx Afwolf Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10