Used Scm R8 for sale (648)

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Electric table adjustment Nodpfxsyy Nnke Afwelf Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels Nljdezcpixspfx Afwjf MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Min. useful working width (mm) 300 Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Nlodeyz Siajpfx Afwjf Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Nlsdpfx Aewp R Eijfwsf Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Nodpfxoxqggce Afwelf Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Nsdoiiv Dcepfx Afwelf Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: new, Year of construction: 2023, Stable cast iron construction Nljdsiknp Ropfx Afwsf Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Nledpfevwd U Iox Afwsf

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer by SCM GROUP. The simple and robust design ensures long-term durability and high performance. The rigid steel machine base guarantees machining accuracy and quality. The machine is intended for larger operations specializing in the production of shaped and straight profiles. Features: - 5 working spindles: bottom, right, left, top, bottom - Automatic central lubrication of the working table - Material feed speed variator - Inspected machine with half-year warranty - Excellent technical condition - Equipped with tooling Technical data: - Working width (finished profile thickness) min/max: 25 / 230 mm - Working height (finished profile thickness) min/max: 6 / 120 mm - Table length: 2000 mm - 1st spindle (bottom): approx. 5 kW - Right and left spindle: approx. 7 kW Nodpfevxtzajx Afwslf - 4th spindle (top): approx. 7 kW - 5th spindle (bottom): approx. 5 kW - Tool speed: 6000 rpm - Stepless feed speed: 4 - 24 m/min - Feed motor: 4 kW - Weight: approx. 3000 kg

Condition: excellent (used), Technical data: Max planing width: 400 mm Max planing height: 240 mm Knife shaft diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual lifting Nsdev Rv Dbjpfx Afwjlf Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Nledpfx Aev S Uz Iefwjf Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm Njdpoxwvqdjfx Afwelf

Condition: excellent (used), Surface planer SCM F520 Class Working width: 520 mm Nledpfx Afex H S Dnewsf 4-knife cutterhead Traditional knives Electronic raising and lowering of the worktable Main fence adjustable up to 45° Table length: 2700 mm CE certificate Technical documentation (DTR) Year of manufacture: 2014

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller Nodpfx Afoxp Ecyswslf 2nd group: rubber roller 3rd combined group: roller/pad Motor power: 2 x 15 kW

Condition: excellent (used), Year of construction: 2006, 4 AXIS CNC ROUTER X axis : 3400 mm, pos. speed : 105 mtr/min Y axis : 1720 mm, pos speed : 80 mtr/min Z axis : 400 mm, pos speed : 25 mtr/min Nledpfx Afexdhkcswsf C axis : See pictures attached Main router : POWER 2000 : 10 Kw ( 15 Hp ) Router speed : 900 - 18.000 rpm Tool chucks : HSK63 Rotating tool bank : 12 plc. Number of alloy vacuum beams : 8 pc. Number of vacuum suction cups : 3 x 8 = 24 pc. NUM 1040 / Windows XP Pro / XILOG Plus Drilling : 12 vertical(7 right/5 Left), 6 horisontal ( X : 2 + 2 / Y : 1 + 1 ), CC 32 mm Saw spindle, max sawblade : 200 mm, 0 - 360 degree, 2,2 Kw BECKER vacuum pump : 250 m3/hour, 5,5 Kw Waste conveyer in bottum of machine, outlet : Right side of machine All tools on pictures included Machine weight : 4600 Kg

Condition: excellent (used), Panel saw SCM Si400e 9/24 Technical specifications: Carriage length: 3200 mm Electrically adjustable blade angle Electrically operated blade lifting Electric adjustment of right-side rip fence Cutting width right: 1270 mm Maximum cutting height: 130 mm Blade speed variable via belt Scoring unit speed: 6500 rpm Blade guard Emergency stop Main motor power: 5.5 kW Scoring unit motor power: 0.75 kW Overall dimensions: Height: 1400 mm Nsdjw Rkz Sjpfx Afwelf Width: 4300 mm Length: 3550 mm

Condition: used, Year of construction: 1992, used Manufacturer: SCM Model: Compact 220 S Year of manufacture: 1992 Machine No.: 110830 GS-certified for wood dust Number of spindles: 4 Spindle arrangement: bottom–right–left–top Motors: 4–5.5–4 kW Planing width approx. 220 mm Planing height approx. 120 mm Spindle diameter: 40 mm Table length approx. 2500 mm Cutterhead system: Tersa 230/125 Pre-milling cutter Pneumatic roller pressure Nodpfx Afjw En H Nowolf Infeed before the jointer Feed speed 5–20 m/min Profiling Sliding rollers Extraction connection 4 x 120 mm Required space approx. 3000 mm x 1400 mm x 1600 mm Weight approx. 1500 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition, as inspected, without guarantee or warranty.

Condition: excellent (used), SCM M3 multi-track saw Width of track 300mm Nsdsm Rg Dgepfx Afwslf Cutting height max 120mm Main engine power 37kw Feed speed adjustable on variator 6-45m/min Disc diameter max/min 350/200mm Maximum piece width 1000mm Minimum workpiece length 600mm 3 rows of anti-rejection latches Spindle diameter 50mm Bushing diameter 70mm Central track lubrication CE certificate Extraction spigot 200mm

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) Nsdpfsl Hydmjx Afwjlf EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Nodpfjnwkbcex Afwjlf Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 140 mm Diameter of the spindles: 40 mm Number of spindles: 4 Nlsdpeqv Awiefx Afwef Order of spindles: bottom 5.5 kW right + left 11 kW top 7.5 kW feed 3 kW Manual adjustment of all heads Number of top steel pulling rollers: 4 Number of top rubber pulling rollers: 1 1 rubber roller in the top Extraction spigot diameter: 130/150 mm Infinitely adjustable feed rate: 4-26 m./min Feed on gimbals Working table lubrication pump Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Overall dimensions: Length: 4180 mm Width: 1720 mm Height: 1740 mm

Condition: as good as new (ex-display), functionality: fully functional, TECHNICAL DATA: Technical characteristics NOVA F 520 Working width [mm] 520 Total length of tables [mm] 2750 Input table length [mm] 1550 Output table length [mm] 1200 Nsdpfoqw Uyfex Afwolf Knife shaft diameter [mm] 120 Shaft speed rpm 5000 Knife dimensions (4 pcs) [mm] 35 x 3 x 520 Aluminum planer guide [mm] 1200 x 190 Planer guide inclination ° 90 - 45 Working table height from the floor [mm] 845 Exhaust connection diameter [mm] 120 Max. Removal [mm] 8 Engine power kW (HP) 5 (7) ----- Additional built-in options: * Spiral head "XYLENT"

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Configuration: Edge banding EVA glue End cutting saws pneumatic adjustable 0-15° Tilting radius milling pneumatic controllable Free space for further aggregates Very good condition, fully working. Including CE and full documentation. Nljdpfet Ir Tpex Afwof

Condition: like new (used), Year of construction: 2012, functionality: fully functional, I sell the horizontal foil wrapping packing machine Producer: SCM GROUP, Italy Model: PACK 8080 Year: 2012 / like NEW, almost not used before Working circle diameter 1300mm. Working tables width 900mm. Nlodsr Alx Uepfx Afwof Feeding manual with tables total length 2,60m Assembled, ready for work. Avialable immediately. On stock.

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nljdpfxor A Eq Rs Afwjf Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame