Used Scm Startech 23 for sale (572)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Psdpfsxy Tmnjx Adlspr

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 230 V, type of input current: three-phase, working height: 150 mm, We offer this very well-maintained SCM Multiflex C window and door machining center, year of manufacture 1995. Purchase date: June 1995 Tenoning carriage power: 15 hp Profiling spindle power: 10 hp each Tenoning spindle height: 320 mm Profiling spindle height: 320 mm Ppjdpeyvhnuofx Adlor Electrical connection: 3x230 V Glazing bead recovery system The machine is still in very good working order. It has had only one owner throughout all these years, used exclusively in a family carpentry workshop (father and son). Therefore, the machine is certainly not worn out. Reason for sale is the modernization of the machinery fleet. A new SCM corner joint machine has been acquired. The machine remains fully operational and can be inspected and tested until June. All features and functions are still intact. Sold without tooling (cutters).

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Ppedpfx Adsxwz Izsljr - Planing width: 410 mm - Min. thicknessing height: 3 mm - Max. thicknessing height: 240 mm - Max. cutting depth: 7 mm - Total table length: 2060 mm - Number of knives: 3 pcs. Tersa knives - Thickness table adjustment: motorised - Thickness display: mechanical - Motor: 4 kW - Feed speed: 6/12 m/min - Infeed roller: steel - Outfeed roller: steel - Extraction port diameter: 120 mm Availability: short term Röllbach

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Spindle configuration 1st spindle: Planing spindle – 4 kW 2nd spindle: Right vertical spindle – 5.5 kW 3rd spindle: Left vertical spindle – 5.5 kW 4th spindle: Top horizontal spindle – 4 kW 5th spindle: Bottom horizontal spindle – 4 kW 6th spindle: Universal spindle – 4 kW Spindle speed: 6,000 rpm Spindle diameter: 40 mm Working area Working width: 25–230 mm Working height: 10–120 mm Min. workpiece length: 450 / 630 mm (depending on version) Feed Infinitely variable: 5–25 m/min Feed rollers Ø 140 mm Infeed table 2,000 mm Tooling ranges Vertical spindles: 100–180 mm Ppedpfx Adjyym Nrelor Horizontal spindles: up to 180 mm Max. profiling depth, vertical: 40 mm Features Manual table and central lubrication Robust industrial design, smooth operation and high precision

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 Ppodjyz Si Hspfx Adlsr No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is the 1st Double End Tenenor in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 2+2 Vertical columns to support the working units Ppsdpfx Aoyz Siasdler Min. useful working width (mm) 300 Max. useful working width (mm) 2000 Min. useful working thickness (mm) 6 Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 60 No. 4 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Vertical Milling Unit (1.5 kW at 1470 rpm)

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,280 mm, travel distance Z-axis: 150 mm, overall weight: 6,300 kg, spindle motor power: 18,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. • Typical applications: nesting production; windows and doors manufacturing; stair components production Ppodeyu Rbmopfx Adljr • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min • Lubrication: Automatic central lubrication system • Work table: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly to the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in working range (12,000–18,000 rpm); CW/CCW rotation; air cooling with fan; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, 250 m³/h each • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphic programming editor; DXF import; subprogram and macro management • Electrical: 400 V; 50/60 Hz • Construction: Heavy welded gantry; high-rigidity industrial frame; aluminum matrix table mounted directly to the base • Safety: Fixed safety fencing on two sides; CE marking • History/condition: One owner since new; used continuously in one company; regularly serviced; technical condition very good Additional equipment • Automatic dust extraction hood

Condition: excellent (used), functionality: fully functional, AUTOMATIC MULTI RIP SAW model SCM M3 second hand machine carpet with integral cast iron elements in excellent condition. general condition of the machine: excellent Technical details : max.height of cut mm.120 max.working width mm.300 minimum length of cut mm.250 Ppodpoy Ev Izjfx Adljr max.diameter of blades mm.350 min.diameter of blades mm.200 main motor power Hp 35 feed motor power Hp 1,5 arbor speed rpm 4200 variable carpet advancement speed. from 6 to 45 m/min. net weight kgs.2200 volt. 380/50

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 Ppjdpoyzgxcefx Adljr - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: used, Year of construction: 2013, power: 9.5 kW (12.92 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,250 mm, number of axes: 3, actuation type: electric, total height: 2,244 mm, total length: 5,240 mm, total width: 2,500 mm, overall weight: 2,700 kg, Equipment: CE marking, We offer this used SCM TECH Z1 machining centre, year of manufacture 2013. Type designation: FORA-FRESATRICE CN Manufacturer: SCM Ppsdpeyvpp Hofx Adler Serial number: AA1/017424 Type: TECH Z1 Model: TECH Z1 Year of manufacture: 2013 Weight: 2,700 kg Rated voltage: 400 V Rated current: 31 A Frequency: 50 Hz Short-circuit current: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1990, used, in good condition with Tersa cutterblock and infinitely variable feed Make: SCM Model: S63B Year of manufacture: 1990 Machine no.: 47015 GS-certified Motor: 5.5 kW Planing width approx. 630 mm Planing height approx. 3–240 mm Psdpfoyztzqsx Adlopr Segment pressure beam 2 steel feed rollers Feed rate: 18 m/min Number of knives: 4 pcs Knife system: Tersa reversible knives Digital height display Electric fine adjustment of height Extraction port D 160 mm Space requirement approx. 1250 x 800 x 1100 mm Weight approx. 750 kg Location: 97447 Gerolzhofen, freely loaded, unpacked Delivery in current inspected condition, without warranty or guarantee

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12 Ppodpfx Astwgirodlor

Condition: used, machine/vehicle number: 007691, X axis working area: 2440 mm Y axis working area: 1220 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Psdpju Rigyefx Adlepr

Condition: used, machine/vehicle number: 006487, X axis working area: 3060 mm Y axis working area: 1240 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 5 axes Ppsdpfx Adjn Rzclolor Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: ready for operation (used), SCM T 120 C with power feed Ppjdpfxjyw Sydo Adlsr

Condition: good (used), Year of construction: 2010, machine/vehicle number: AA2/001307, functionality: fully functional, operating hours: 25,000 h, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 6,500 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 180 mm, controller manufacturer: NUM, total height: 2,750 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 6,500 mm, table width: 1,350 mm, controller model: 1040, feed length X-axis: 6,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 30,000 m/min, spindle motor power: 11 W, nominal power (apparent): 15 kVA, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 45,000 m/min, spindle speed (min.): 24,000 rpm, table height: 950 mm, Working travel of axes X-Y-Z: 6500 x 1350 x 250 mm Working area: 6500 x 1250 mm C-Axis = 640, B-Axis = 270 PRISMA milling unit with 5 interpolating axes X, Y, Z, C, B Ppjdpfjw Au N Sox Adler Electric spindle 11 kW, 600–20,000 rpm Tool holder HSK63 Working table with TVN pads and vacuum cups Cross laser projector on working table TVN vacuum cup Pneumatic clamps Tool magazine for 24 tools Drilling unit Vacuum pump 5.5 kW, 250 m³/h CNC control NUM Operating system: Windows XP Xilog Plus Maestro Weight approx. 5,450 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Wide Belt Sander SCM Sandya S600 RCS 110 | Excellent Condition | Year of Manufacture 2015 For sale is a high-quality wide belt sander from SCM (Sandya S600 RCS 110) in very good condition. The machine is fully operational and ready for immediate use. Working width: 1,100 mm Working height: 4–170 mm Main motor: 15 kW Belt speed: 3–16 m/s Feed speed: 3–18 m/min Belt length: 2,150 mm Steel calibration roller R (Ø 140 mm) Combination unit CS: Rubber roller (Ø 160 mm, 30 Sh) Podpfx Adoy Hn U Ajlspr Electronic segmented pad (segment width 30 mm) Year of manufacture: 2015 Well maintained, technically flawless All information provided without guarantee. Technical data according to manufacturer or previous owner. Subject to errors, changes, and prior sale. No guarantee or warranty.

Condition: used, Year of construction: 2015, machine/vehicle number: AA1/018167, functionality: fully functional, operating hours: 18,050 h, input voltage: 400 V, input current: 59 A, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 3,500 mm, total length: 6,000 mm, total width: 3,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used SCM Tech Z5 machining center for sale. Pjdpfx Adoynwu Tslepr Year of manufacture: 2015. This is a 5-axis CNC machine, currently connected and ready for demonstration. Technical data and features: • Model: SCM Tech Z5 • Type: AA1/018167 • Year: 2015 • Working area: 3,300 × 1,400 × 180 mm • Axes: 5-axis execution • Control/software: Maestro Version 1.00.022.1034 (3D design and milling) • Includes Clemex system • Additional licenses: 1× 3D dongle, 2× 2D dongles • Connection: 400 V / 59 A • Vacuum pump: Type Q2EFA132M6C-34 • Tool set with approx. 20 cutters (including diamond cutters, insert, roughing, cove, and rounding cutters) • Additionally, I am offering my Palette CAD, which is connected to the machine, including two licenses (€18,000 net) If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, SCM ST4 Circular saw with spindle (without fence) Ppsdpfx Aoqqu Aqedlor Motor power: 5+5 hp

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 500 mm, Thickness planer Manufacturer: SCM Model: S 50 Motor: 5.5 kW 4-knife cutterhead Pjdpfx Aoyu N Uljdlspr Feed speed: 7.5–25 m/min Planing width: 500 mm Planing height: 240 mm 2 rollers in the table

Condition: used, Year of construction: 2017, functionality: fully functional, Machine Type: Automatic single-sided edge banding machine Key Features: Model: K 800R Psdpfx Adoyxcbheljpr Capacity: 1 unit, net weight 2,472 kg Purpose: Edge banding and processing of wooden and plastic components for the furniture industry Standards: Complies with European safety regulations (CE certified) Equipment & Accessories: AUTOMATIC SINGLE-SIDE EDGEBANDER European safety regulations (CE norms) Olimpic K 800 "T-ERL" composition (47) Volt 400 EU Frequency 50 Hz "AUTOSET" for ER2, T-ERS and T-ERL compositions "StarTouch" electronic control instead of "Touch 7" Panel spacer on infeed fence Electronic positioning of top presser Horizontal movement of "K-SEL" end cutting unit RAS/S 2P edge scraping unit "AAR" anti-adhesive unit "EASY SIZE" device Edge detecting sensor "IGLUE" kit for gluing unit "SGP" glue pot with manual dosing in substitution of he standard one 2 positions pneumatic kit for RI/800 trimming unit 3 positions pneumatic kit for RI/800 trimming unit Spray-mist device for delicate edges "RCA/2C" glue scraping unit "SPN" brushing unit Edge scraping unit radius = 1 mm Edge scraping unit radius = 2 mm Wood blocks

Condition: excellent (used), SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 Pjdpfen Dw N Djx Adlepr n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50 OTHER Surface Planer machines available as in photos

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam Ppedpjyywi Asfx Adlor N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Pedewzmbqepfx Adlspr Installed power KW 60

Condition: ready for operation (used), Year of construction: 2001, operating hours: 38,809 h, number of axes: 3, overall weight: 8,000 kg, This 3-axis SCM Record 240 was manufactured in 2001. It features a vertical main spindle and a vacuum table for workpiece fixation. The integrated extraction system ensures a clean working environment, while the Becker vacuum pump provides efficient performance with an inlet capacity of approximately 240 m³/h. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Record 240 machine we have for sale. Contact us for further details. • Voltage: 400 V • Phase: 3 Phase • Frequency: 50 Hz • Current: 79 A • Workpiece Fixation: Vacuum Table • Main Spindle Type: Vertical Main Spindle • Dust Extraction: Integrated Extraction System • Hours: 38.809 h Additional equipment • Vacuum Pump: Becker VTLF 2.250/1 • Speed: 1440 rpm • Power Requirement: 5.4 kW • Inlet Capacity: approx. 240 m³/h • Maximum Vacuum: approx. 200 mbar • Extraction System: AL-KO • Power: 3.0 kW • Voltage: 400 V • Accessory: BENZ GmbH Angle Head / Angular Aggregate • Tool Holder Interface: HSK63 • Transmission Ratio: 1:1 • Maximum Input Speed: 12,000 rpm • Maximum Aggregate Speed: 12,000 rpm • Direction of Rotation: Right-hand rotation • Lubrication Type: Grease lubrication • Lubricant: Klüber Isoflex NBU15 • Maximum Tool Torque: 20 Nm • Maximum Tool Diameter: 10 mm • Accessory Weight: approx. 5.5 kg Ppedpfxoyrcy No Adlor