Used Scrap Shear for sale (2,699)

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks Credpjxn Tx Hsfx Adaoi

Condition: good (used), functionality: fully functional, Year of construction: 1993, Sheet width: 3100 mm Sheet thickness: 6 mm Stroke: 160 mm Back gauge: 1000 mm Total power: 5.5 kW Crjdpfx Asxu Nb Dodaji Machine weight approx.: 6,500 kg

Condition: ready for operation (used), Year of construction: 1964, working width: 3,050 mm, sheet thickness (max.): 10 mm, total length: 4,250 mm, total width: 2,800 mm, total height: 1,800 mm, Working width: 3050 mm Sheet thickness: 10 mm Credpfx Adexrculoasi Equipped with infeed table 2500x2000 mm

Condition: good (used), Year of construction: 2009, FEATURES Useful cutting length: 3.2 m Max. thickness steel S235JR: 6 mm Weight: 7,200 KG Overall dimensions (cm): 390x180x170 Power supply: 400 V 3-phase Power: 7.5 KW Max. cutting rate: 14 cuts/min Electric rear stop, adjustable from 15 to 650 mm Digital display and fine adjustment with handwheel 1 m alignment gauge with ruler, T-slot and retractable latch Hardened steel blades, 4 cutting edges Fixed cutting angle of 1.5° Manual blade clearance adjustment on the side Codpfxoxp R Afo Adasri Table equipped with 18 balls to prevent marking the sheet 2 front supports, each 1 m Cutting line lighting Slotted grid for narrow strips Oil tank Foot pedal control Rear light curtain guard

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° 1000 mm table height 930 mm Csdpfjxpi Dhex Adajri work height max. 930 mm

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Codpfx Adexp Ndhjajri Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, control type: CNC control, overall weight: 4,500 kg, HACO hydraulic guillotine shear, GSX model Brand new machine Codpfx Adexay U Eoasri This series offers several models for sheet metal working, from 2 to 4 m in length and 6 to 13 mm in thickness. Equipped with SC200 touchscreen CNC control Ball transfers on the sheet support table Options: Sheet holding system Sheet return system to the front Retractable rear stop Finger protection via light barrier Sheet clamps with plastic tips Full table with ball transfers

Condition: good (used), Year of construction: 1975, Used plate shears from Safan Capacity 3100 x 13 mm Electric back gauge Crjdpfx Ajxlgmrjdaji Adjustable cutting angle Machine comes as from work, fixed price based on so along

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a standard geared brake motor via a chain connection to the main axle. the knives are of the highest quality. The optimal cutting angle secures the together with the sheet holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. Cjdjvn Al Hjpfx Adasri We also have a Kapema manual swing bending machine, model KFS 20/20, with a segmented top rail for bending box sections. Please send us your inquiry if you are interested. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: used, functionality: fully functional, operating hours: 1,249 h, Peddinghaus 210A/13 combined section steel shear with punch, flat bar shear, rod shear, profile shear, and notching device. Equipped with infeed and outfeed conveyor. Bending capacity: 42 mm Punching capacity: 16 mm Cjdpfx Adjxqph Nsaori Motor power: 3 kW Round steel max: 25 mm Square steel max: 38 mm

Condition: new, Year of construction: 2025, sheet width 1360 mm plate thickness 06,0 mm table width 455 mm work height max. 880 mm cutting angle 1°30 ° Csdoxpi Dbjpfx Adaori rear stop 750 mm

Condition: used, 1 unit Hydraulic Guillotine Shear ERMAKSAN CNC HGD 3100x10 Cutting length approx. 310 cm, as per photos and inspection, self-dismantling Color: grey Year of manufacture: 2014 Condition: used Payment method: advance payment by bank transfer Credexrch Espfx Adaoi Location of goods: Hall 1 and rack in outdoor area Shipping: Collection only – No shipping offered for this item!

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Crsdpexupvbsfx Adaoi Technical Data: - Sheet and flat bar shear, blade length: 175 mm - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm - Punching station: - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - Various punch and die sets included

Condition: excellent (used), Year of construction: 2001, In goed werkende staat verkerende gebruikte 3 meter plaatschaar van Safan. Cedpsxlf Injfx Adasri Type: HT 310x4 Capaciteit: 3100 x 4 mm Touch screen besturing Automatische plaatdikte en hoek instelling

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW Codpfx Adevdfmxeaeri weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, Year of construction: 1991, Hole punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm Credpextqu Njfx Adasi . Flat steel shears: 500 x 18 mm . Notching device with rectangular tool up to 13 mm . Profile steel shears, L-steel, 90° mm . - Machine in good original condition!! approx. 70 sets of hole punching tools . .

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 Codpfjxmakgjx Adajri total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (max.): 13 1/min, sheet thickness (max.): 13 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,000 mm, power: 30 kW (40.79 HP), input voltage: 400 V, overall weight: 12,500 kg, total length: 4,280 mm, total width: 2,300 mm, total height: 2,350 mm, year of last overhaul: 2025, Equipment: emergency stop, finger protection, foot remote control, safety light barrier, Powerful Used Hydraulic Guillotine Shear – Durma SBT-3013 (2014) We offer a pre-owned, heavy-duty Durma SBT-3013 hydraulic guillotine shear, available for immediate delivery. This machine is engineered for demanding applications and delivers precise cutting performance—ideal for workshops and manufacturing facilities requiring thick plate processing and long cutting lengths. Csdpfxexd H Dne Adajri Specifications: Year of manufacture: 2014 Power supply: 230V / 400V – easily switchable via key selector switch in the electrical cabinet Cutting length: 3,100 mm Maximum thickness (mild steel ST42): 13 mm Maximum thickness (stainless steel): approx. 8 mm Cutting strokes per minute: 13 Dimensions & Weight: Machine width: approx. 2,300 mm Total width with support arms/guards: approx. 3,600 mm Length: approx. 4,280 mm Height: approx. 2,350 mm Weight: approx. 12,500 kg Features & Benefits: • Motorized backgauge (1,000 mm) • D-Touch 7 CNC control with touchscreen interface • 16 hydraulic hold-downs for secure clamping (all recently overhauled) • Adjustable blade clearance • Extra-rigid frame and robust construction • Well maintained with recent comprehensive service including: – New hydraulic oil and filters – Blades sharpened – Hold-downs overhauled – New main switch

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg Crodpfx Adowhf Nteaji - Available at Short Notice -

Condition: ready for operation (used), An electric guillotine shear L. Schuler (Göppingen) is available. Working width: 1000mm, max. sheet thickness iron/steel: 2.5mm/2mm, flywheel speed: 100rpm, power requirement: 4HP. An on-site inspection is possible. Credpsxt Rl Uofx Adaei

Condition: good (used), functionality: fully functional, Year of construction: 1995, Working width 3,050 mm Cutting thickness up to 6 mm Stand width 3290 mm Blade length 3090 mm throat 200 mm DNC7000 control unit Table height 900 mm Credpfx Adjxr A E Rjaoi Cutting angle 1 - 2° Oil tank volume 210 liters Electrical power 15 kW Speed 1465 rpm Space requirement L/W/H 4,820 x 6,400 x 2,100 mm Weight 9,450 kg

Condition: good (used), Good day, we are offering here a set from a private purchase: Folding machine Schechtl KS 200 - 1mm - 2m Cedpfexuu Hxox Adaeri Guillotine shear Schechtl HT 200 - 1.25mm - 2m Back gauge 500mm Segment folding machine Schechtl UK 100 S 1.5mm The equipment was purchased from a private individual; all machines are in good and ready-to-use condition. If additional accessories are required, there is a wide selection available on site – from back gauge to tube bars or beading tools, Eckold hand tools, etc.

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Codpfx Aexabi Rjdajri Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Cedsxn Rhrjpfx Adasri Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Year of construction: 1980, condition: ready for operation (used), Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment. Cjdpjxt Rk Dsfx Adaeri