Used Scrapers for sale (731)

Condition: new, Scrapers are used as tools for the fine removal of chips, for removing old layers of paint and for cleaning dirty surfaces. Scrapers are usually not functional at the time of purchase, but only a piece of sheet steel. To make them work, a fine burr must first be ground. Gjdpfx Abjftm Sls Ueca We offer you fully functional scraper blades with a thickness of 0.4 mm and 0.5 mm made of Swedish steel for new purchases. If required, we will be happy to sharpen your "used" or "new" scraper blades and have them returned to you in working order. Contact us. We will be pleased to make you an offer for new scrapers - ground or unground - and/or a grinding offer. We would be pleased to send you further information about scraper blades.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure Gedpfexzfwbox Ab Ujca - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: excellent (used), Year of construction: 2012, Ref:11025 . 2012 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders - manual loading Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Gjdoxx Uyyepfx Ab Usca Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: 2017 Kolbus ECK 100 Corner cutter Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 100007528, total length: 9,000 mm, total width: 3,000 mm, total height: 1,700 mm, type of input current: three-phase, power: 13 kW (17.68 HP), Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Gjdpfjxmi E Hox Ab Ueca Delivery can be arrange in the Republic of Ireland

Condition: excellent (used), Becomix Stirring & Mixing Tank Gedox Dnkijpfx Ab Ueca Electric lift lid Scraper and mixer motors 316 stainless steel 3000 lts capacity

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center Gjdpfx Abex Hp Epo Uoca - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2020, Main Drive Spindle speed range 30000 rpm Spindle motor power 18 kW Number of axis 5 Gsdpfx Aox D S Hnjb Ujca Movement X-Axis Movement 254 mm Y-Axis Movement 330 mm Z-Axis Movement 330 mm Tools Number of index 40 Type of tool holder HSK40 Additional Equipment Scraper Conveyor Through Spindle Coolant: 70 bar Transformer: 35 kVA This 5-axis Kitamura Medcenter 5AX was manufactured in 2020, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre ensures reliable performance. Consider the opportunity to buy this Kitamura Medcenter 5AX vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit Gcjdpfxox Enqus Ab Uoa - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: used, These Scrape Surface Heat Exchangers can be used on various products for heating process such as Tomato pastes, custards, margarines, oils, mayonnaise, etc. We have fully refurbished these units by changing internal gaskets, rings, sand blasting , paint job, new stainless steel frame , new controls and motor test and service . Technical Details of VOTATOR - Make: A. Johnson & Co London - Year of Refurbishment: 2025 - Quantity: 5 units - Diameter: 6 inches - Metals: Grade 316 Stainless Steel - Usage: Horizontal Votators Specifications: - Chamber Dimensions:6" Diameter Stainless Steel Chamber - Length: 6' - 1 1/2" between end plates - Rotating Centre:4 3/4" Diameter Stainless Steel - Equipped with two PTFE scraper blades - Drive:11 kW Motor Drives - Speed: 1470 rpm (through a V-belt reduction) - Reducer:Giving a shaft speed of approximately 367 RPM. Availability: - Location: In stock - Available: Immediately General Capacity Estimation Formula: For a VOTATOR, the capacity can roughly be estimated using the following formula: [ \text{Capacity} = \text{Chamber Volume} \times \text{Turnover Rate} ] Step 1: Calculate the Chamber Volume The volume of a cylindrical chamber can be calculated as: [ V = \pi \times r^2 \times h ] Where: - ( r ) = radius (half of diameter in inches), - ( h ) = height (length of the chamber in inches). Given: - Diameter = 6 inches, so radius ( r = \frac{6}{2} = 3 ) inches. - Length ( h = 6 \text{ ft} = 72 \text{ inches} ). Calculating the volume: [ V = \pi \times (3)^2 \times 72 \approx \pi \times 9 \times 72 \approx 2036.75 \text{ cubic inches} ] To convert cubic inches to liters (since 1 cubic inch = 0.0163871 liters): [ V \approx 2036.75 \times 0.0163871 \approx 33.39 \text{ liters} ] Step 2: Estimate Turnover Rate The turnover rate depends on the speed of the VOTATOR and how many times the contents of the chamber can be processed. Given the shaft speed is approximately 367 RPM, you might assume a turnover rate of about 1 turnover per minute for a basic estimate. Final Capacity Estimate Assuming 1 turnover per minute: [ \text{Capacity} \approx 33.39 \text{ liters/min} ] Conclusion Godpfx Abjxxg T Ej Uoca The estimated capacity of each VOTATOR is approximately 33.39 liters per minute Capacity Calculation: - Estimated Capacity: 33.39 liters/minute Convert to Liters per Hour: [ \text{Capacity per hour} = 33.39 , \text{liters/min} \times 60 , \text{min/hour} ] [ \text{Capacity per hour} \approx 2003.4 , \text{liters/hour} ] Conclusion The estimated capacity of each VOTATOR is approximately 2003.4 liters per hour.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, working height: 900 mm, space requirement height: 1,400 mm, space requirement length: 4,050 mm, space requirement width: 1,300 mm, operating pressure: 7 bar, with PLC control system (including touchscreen) and hot-melt adhesive application to the workpiece for edge materials up to 3 mm: joining cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change pot preparation including glue discharge device, HF trim saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combined version), corner round milling unit, surface scraper (including pneumatic lift), robust chain feed, ball-bearing double roller upper pressure, viewing window from machine rear side, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change set-up for corner milling unit, radius scraper (including pneumatic lift), chassis Gjdex E N Nfepfx Ab Ujca F 4 – Technical Specifications Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m / min Ready for operation: approx. 3.5 min Max. power consumption: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Worktable height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Godpfox Dnilox Ab Usca Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Performance Machining Center - 3 Axes Manufacturer: SPINNER Model: VC1150-10 (ST) Year of manufacture: 2017 Control unit: Heidenhain TNC 620 TECHNICAL DATA: Tool holder: SK40 Travel paths: X = 1,150 mm, Y = 620 mm, Z = 600 mm Spindle: 10,000 rpm, Max = 200 Nm, Pmax = 29 kW SPECIAL EQUIPMENT: Gsdpfxjx Dkize Ab Ueca - Chip conveyor, scraper belt, right-hand side - Tool changer with 60+1 positions - Direct measuring systems in X/Y/Z - High-pressure through-spindle coolant, 22 bar - Coolant/air blast switching for internal spindle flushing, via M-function - TNC software option "Probe System Functions" - Workpiece touch probe system for milling machines, Blum TC52 system The machine can be inspected under production conditions. Sale without guarantee or warranty. Subject to prior sale.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included Gsdpfx Abjx Hn D Re Uoca - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Gedpfowka N Tox Ab Ujca Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 2007, functionality: fully functional, Discover this used Masterwood Project 415 CNC machining center from 2007, located in The Netherlands. This machine features an expansive working area measuring 5000 x 1390 mm, providing ample space for versatile woodworking projects. The 4000 rpm rotation speed ensures efficient and precise machining operations, while the 1.5 kW motor power adds reliability to its performance. Elevate your woodworking capabilities by investing in the Masterwood Project 415, a trusted CNC machining center designed to deliver exceptional results in every project. Gcodpfxjxq Hpqj Ab Usa Features: Robust monolithic frame with open "col de cygne" structure. Movement of axis X by gear and rack and pinion. Movement of axes Y and Z by ball screws. Drive of axes X - Y - Z by brushless motors. Displacement on high-quality linear guides with ball screws and scrapers on the sides. Automatic timed lubrication of linear guides managed by CNC control. Displacement of beams on two controlled cylindrical slides with ball screws. Pneumatic locking by double pistons mounted on both slides. Vacuum block for piston locking.

Condition: good (used), Year of construction: 2011, ET 6600-2 Rotary Table Wet Blasting System Process Description: The principle of wet blasting technology has proven itself for several decades as an extremely effective and efficient cleaning system. The ET 6600 wet blasting system is a rotary table wet blasting system based on centrifugal wheels, specifically designed to remove contaminants such as oils, greases, emulsions, rust, scale, paint, or other organic contaminants from components. The system is equipped as standard with a process chamber, two centrifugal wheels, a spray nozzle/blow-off unit, and a rotary table. This rotary table rotates the components in front of the centrifugal wheels or the spray nozzle/blow-off unit, thus enabling the processing of all areas of the components to be cleaned in a multi-stage process (blasting + washing + rinsing + drying). Workpiece Description: Various workpieces contaminated with oils, greases, emulsions, rust, scale, or other impurities Godpfsx Exkfex Ab Usca Workpiece Material: Primarily metallic workpieces, but mineral or plastic workpieces are also possible Workpiece Dimensions: Min. 100 x 100 x 100 mm | Max. 1400 x 600 x 800 mm (Length x Width x Height) Other dimensions available upon request! Max. Weight: 500 kg (Optionally expandable to 2000 kg.) Processing task: Cleaning, degreasing, derusting, descaling, paint stripping, passivation Normal processing time: Cleaning, degreasing, derusting, descaling, paint stripping, passivation Final condition: Cleaned surface without specified requirements for residual contamination and, if applicable, corrosion protection Process media: Blasting media, cleaning agents, process water purifier, and, if applicable, defoamer or passivating agent Process water treatment: Scraper conveyor – filter module or centrifuge system Manufacturer: ET Teknik Type: ET 6600-2 Operating voltage: 3x400 VAC+N+PE Frequency: 50 Hz Power: 27 kW Fuse: 63 A Control voltage: 24 VDC Year of manufacture: 2011 Dimensions: (L x W x Dimensions (H): 2700 x 2200 x 3700 mm Weight: approx. 4000 kg Find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2007, condition: used, New: No VAT/margin: VAT qualifying Manufacturer : - Year : 2007 Type: Melter with heating elements - immersion heaters Volume : 35 L Anchor blade stirring with Teflon scrapers Tank lid Variable speed drive: mechanical and manual Jacketed : Yes Gedpfx Aox Au U Eob Ujca Immersion heaters: 2 Workshop test temperature: 80°C Recirculation pump for jacket Electrical cabinet Video available in running condition

Condition: used, Year of construction: 2013, spindle speed (min.): 12,000 rpm, Machine type: CNC machining center 3+2 axes Model: DMU50 Ecoline Manufacturer: DMG Control: Siemens 840D with ShopMill user interface Year of manufacture: 2013 Location: Germany Travel range: X-axis 500 mm Y-axis 450 mm Z-axis 400 mm Table 360° x 0.001°, -5°/+110° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 300 kg Tool magazine with 30 positions SK40 Chain with tool pots and double gripper Direct linear measuring system X, Y, Z including air purge RENISHAW probe kit for DMU50 ECOLINE Calibration tool with tool holder Gsdpox Exkxefx Ab Usca ICS pump 12 bar Scraper belt conveyor with enlarged 360 l coolant tank Coolant-air blow-off switch Coolant spray gun 4-color signal tower Electronic handwheel (Subject to errors and technical changes) For sale on behalf of a customer!

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipment and technical data: - With PLC control including touchscreen - With joint milling unit with DIA tool up to 2 mm milling depth (maximum joint thickness 1 mm for special materials such as multiplex) - With extendable workpiece support - With quick-heating glue pot with glue change device - With cross-cut saw - With combination milling cutter r = 2 mm with separate pneumatic adjustment - With corner copying unit r = 2 mm - With surface scraper Godpex Enqhofx Ab Ueca - Maximum edge thickness: 2 mm - Minimum - maximum workpiece thickness: 10 - 40 mm - Minimum workpiece length: 180 mm - Feed speed: approx. 7 m/min - Ready for operation: approx. 3.5 min - Power consumption: approx. 7.4 kW - With undercarriage - Extraction port: 1 x 140 mm Dimensions: approx. 4,200 x 1,300 x 1,400 mm Weight: approx. 750 kg Availability: approx. end of January 2026 Location: Hesse

Year of construction: 1998, condition: used, Power: 4 kW (5 HP) Empty weight: 300 kg Cargo space capacity: 10 l Tank pressure: 2 bar Volume: 10 l Manufacturer : VMI Rayneri Model Trimix (TXR) 10 litres Year : 1998 Type : Vacuum mixer Application : Dispersion, dissolution, homogenisation, deaeration, heat exchange > gels, creams, pomades, …   Total volume : 10 Litres Empty weight : 300 kg Power : 3.5 KW Power supply: 230 V Pressure : 2 bars Temperature : 120°C Jacket + insulation Mixing : – Anchor blade with scrapers: 0 – 60 rpm – Counter agitation: 0 – 180 rpm – Dispersion/emulsion turbine: 200 – 3000 rpm   Sold with water temperature controller : Manufacturer : SOLEV Model : RE 50-3-SC-R-20-2D Gsdpfsx Au Sdex Ab Uoca Year : 1998 Heating capacity : 3 KW   Documentation available

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive Gcjdpfx Asw Nadtsb Usa - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Year of construction: 1986, condition: used, Dimensions (LxBxH): 266 x 142 x 251 cm Rotation speed: 26 rpm Volume: 880 l Manufacturer : OLSA Model : Speedycream 750 Year : 1986 Type: vacuum mixer Capacity: 750 Liters Total capacity: 880 Liters Minimum working capacity: 280 Liters Jacketed : 3 bars Gcsdpfxex Auv No Ab Usa Inside tank pressure: 1 bar Slow stirring: 5.5 KW Planetary: 15-78 rpm Blade with Teflon scrapers: 5-26 rpm Satellite rapid mixer (located on the lid): 7.5 KW Homogenizing disperser: 1400 - 2800 rpm Movement speed: 5-26 rpm Temperature controller Planetary mixer speed indicator Internal vacuum indicator Planetary mixer power consumption indicator Fast stirrer power consumption indicator Planetary speed indicator Satellite speed selector Tilting axis Vacuum pump : 1,45 KW Drain valve Ø 65 mm Exterior dimensions: 2658 mm x 1420 mm x 2510 mm (3870 mm - lid open) Spare parts available (see photos) Original paper documentation available Video available in running condition

Year of construction: 1993, condition: used, Power: 8 kW (11 HP) Tank pressure: 4 bar Volume: 406 l Gcjdjx Auviepfx Ab Usa // currently being renovated in our workshops //   Manufacturer : Haagen & Rinau Model : Unimix SRM 200 Year : 1993 Type: vacuum mixer   Material : stainless steel   Vessel capacity: 406 L Maximum temperature: 143°C Pressure: – 1 / 3 bars   Double jacket capacity: 34 L Maximum temperature: 151°C Pressure: 4 bars   Slow mixing : Central stirring + scrapers. Fixed counter action Power: 7,5 KW Fast mixing: emulsifier at the bottom of the tank. Suction and recirculation of the product. Power : 8 / 12 KW   Integrated electrical cabinet. Siemens S5 controller   Hydraulic unit: – Up and down of the cover with its mixing tool – Rotation of the cover with its mixing tool – Tilting of the tank – Up and down of the homogeniser at the bottom of the tank.

Year of construction: 2022, condition: used, Volume: 400 l Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Godpsx Auurefx Ab Uoca Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Year of construction: 2021, condition: used, New: No Cargo space capacity: 400 l VAT/margin: VAT qualifying Manufacturer : Brouillon Process Model: 884-H-EAU Year : 2021 Type : Off-axis tilting cooking vessel   Useful capacity : 400 L Material : 304 L stainless steel Diameter : 884 mm Operating pressure : 6 bar Maximum temperature: 110°C Double jacket volume: 32.5 L Mixer: 2 stainless steel anchors, each fitted with an inclined PTFE scraper Speed: 7 - 25 rpm Recycling loop on the double jacket for temperature control Flush drain valve at SMS76 outlet, electro-pneumatically controlled Gcedpfx Asx Aulqob Usa Stop cooking function / mains water cooling Total empty weight: 1200 kg